ABI Error Message

AQH:	ASSOC. NBR NOT DENIED CLAIM

WHEN PROTESTING DENIAL OF 520(C) OR 520(D) CLAIM, THE USCS ASSIGNED PROTEST NUMBER OF THE DENIED CLAIM IS REQUIRED. THE DATE OF DENIAL OF THAT CLAIM CONSTITUTES THE START OF THE 90 DAY FILING & AMENDMENT PERIOD FOR THE PROTEST. THE NUMBER ENTERED IN THE ASSOCIATED CLAIM NUMBER FIELD IS VALID, BUT THE RECORD INDICATES IT IS EITHER NOT A 520 OR IS NOT IN DENIED STATUS.

DLD:	WARNING-NO ACCEL APPV'D-CHK PRIVS

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. IT IS A 'WARNING', NOT A FATAL ERROR, THAT APPEARS IF THE CLAIMANT HAS APPLIED FOR THE ACCELERATED PRIVILEGE, BUT HAS NOT YET BEEN APPROVED. MESSAGE DLD WILL CONTINUE TO BE A WARNING ONLY AFTER 4/6/1999.

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

DKP:	CONFLICTING DUTY AMOUNTS

IF THE CANADIAN DOLLAR DUTY AMOUNT IS GREATER THAN 0.00, THE U.S. DOLLAR EQUIVALENT MUST BE GREATER THAN 0.00.

APP:	ACCEL. DISP. REQ. NOT APPLIC

A REQUEST FOR ACCELERATED DISPOSITION, INDICATED BY 'R', MAY BE SUBMITTED FOR TYPE 514 PROTESTS WHEN 90 DAYS FROM INITIAL FILING HAS ELAPSED AND NO CUSTOMS DECISION HAS BEEN RENDERED. EITHER THE FILING IS NOT A TYPE 514 PROTEST, THE 90 DAYS HAS NOT ELAPSED, OR A CUSTOMS DECISION HAS BEEN RENDERED.

EJV:	INBOX IND MUST BE 'R' OR SPACE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C01 REC, POS 56, PROVIDES THE FILER AN OPPORTUNITY TO INDICATE IF THE INVOICE BEING TRANSMITTED IS AN INITIAL INPUT (SPACE FILL THE POSITION) OR IS IN RESPONSE TO AN ABI REJECTION FROM CUSTOMS WHICH REQUESTED THE TRANSMISSION OF THE INSTANT INVOICE. IN THE LATTER CASE, THE ACCEPTABLE VALUE FOR THIS FIELD IS "R". ANY OTHER CHARACTER TRANSMITTED IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

VEY:	FD 701: DUP AFFIRM/COMPLIANCE

MORE THAN ONE FDA AFFIRMATION OF COMPLIANCE (AND QUALIFIER IF APPLICABLE) CAN BE SENT FOR AN FDA LINE FOR A SINGLE FDA PRODUCT CODE. THE FIRST AFFIRMATION IS SENT IN REC FD01, POS 20-22. IF MORE THAN ONE AFFIRMATION (AND QUALIFIER, IF APPLICABLE) APPLIES THEY ARE SENT IN SEPARATE FD05 RECORDS, POS 5-7. THIS ERROR MESSAGE WILL RESULT IF A DUPLICATE AFFIRMATION CODE IS SENT IN AN FD05 RECORD THAT MATCHES WHAT WAS SENT IN THE FD01 RECORD.

EIF:	SHIPPING/PACKING UNIT ID REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF A C05 RECORD IS TRANSMITTED INDICATING ONE OR MORE SHIPPING UNITS, THEN A C06 RECORD MUST ALSO BE TRANSMITTED FOR EACH OF THE NUMBER OF SHIPPING UNITS LISTED IN THE C05 RECORD. POS 4-20 OF THE C06 RECORD PROVIDES FOR THE IDENTIFICATION NUMBER OF THE SHIPPING UNIT. THIS FIELD CANNOT BE BLANK OR THIS ERROR MESSAGE WILL BE GENERATED.

VA3:	FORM REC TYPE INV/OUT OF SEQ

THIS MESSAGE OCCURS IN A FDA INTERFACE ENTRY. THE REQUIRED ORDER OF FDA LINES IS: FD01 FD02 FD03 FD04 (OPTIONAL) FD05 (OPTIONAL) IF ONE OF THE RECORDS IS OMITTED (E.G. FD01 THEN FD03) THIS MESSAGE WILL OCCUR.

4NN:	LINE ITEM VALUE ERROR

IF A FILER TRANSMITS A CARGO RELEASE DATA TRANSACTION (APPLICATION HI), AND ALSO ELECTS TO REPORT VALUES AT THE LINE ITEM LEVEL (H5 REC, POS 45-54), THE TOTAL OF ALL VALUES IN THE H5 RECORD MUST EQUAL THE AMOUNT SHOWN AS THE TOTAL ENTRY VALUE (H2 REC, POS 29-38). THE TOTAL DOES NOT AGREE, THIS ERROR MESSAGE WILL BE GENERATED.

29K:	"Y" RECORD BLOCK COUNT ERROR

THIS MESSAGE OCCURS WHEN THE INPUT "Y" RECORD BLOCK COUNT FIELD, POS 13-17 CONTAINS A FIGURE THAT DOES NOT MATCH THE ACTUAL NUMBER OF DETAIL RECORDS TRANSMITTED IN THE PARTICULAR APPLICATION. THIS IS A SOFTWARE PROBLEM THAT THE FILER'S VENDOR MUST  USUALLY DEAL WITH.

06N:	RDP NOT AUTH FOR C/S CALL UAG

THIS MESSAGE OCCURS WHEN A FILER CERTIFIES FOR CARGO SELECTIVITY WHEN THE PORT OF ENTRY IS NOT OPERATIONAL FOR CARGO SELECTIVITY (THE DISTRICT-PORT RECORD FOR THE PORT SHOWS C/S = "N"). THIS ERROR REJECTS THE CERTIFICATION FOR CARGO SELECTIVITY PROCESSING. IT DOES NOT REJECT THE SUMMARY. THE FILER SHOULD VERIFY THAT THEY ARE USING THE PROPER PORT OF ENTRY. THIS PROBLEM OCCURS REGULARLY BETWEEN OAKLAND AND SAN FRANCISCO. OAKLAND (2811) IS THE CORRECT PORT OF UNLADING. THE PROPER PORT OF ENTRY FOR OAKLAND IS SAN FRANCISCO (2809). THE PROBLEM IS FIXED BY HAVING THE FILER RETRANSMIT WITH THE PROPER PORT OF ENTRY (IN THIS CASE, 2809) IF THE CORRECT PORT OF ENTRY IS NOT OPERATIONAL FOR CARGO SELECTIVITY, THE ENTRY MUST BE HANDLED NON-ABI.

13M:	MANIFEST QTY MUST BE > ZERO

THE MANIFESTED QUANTITY IS REPORTED BY THE ENTRY FILER IN THE CARGO RELEASE APPLICATION (HI) IN THE HA REC, POS 51-58. IF THE FILER TRANSMITS ZERO AS THE MANIFESTED QUANTITY, THE ABOVE ERROR MESSAGE WILL BE GENERATED.

215:	INVALID TEAM NUMBER

REFERENCE APPLICATION JJ, REC D10, POS 40-42:  FOR DRAWBACK ENTRY TYPES WHERE THE DATE OF ENTRY IS = OR > 10/01/94 ONLY THE FOLLOWING DISTRICT/PORT/TEAM COMBINATIONS WILL BE VALID: DDPP / TEAM DDPP / TEAM 0401 1DA 2002 5LB 1001 2DB 5301 6D0 3901 3DR 2704 7D0 5201 4LA 2809 7D7

VPP:	EXPORT DT CANNOT BE > SYS DATE +2

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN POSITIONS 22-27 OF THE D01 RECORD AND CANNOT BE MORE THAN 2 DAYS IN ADVANCE OF THE SYSTEM DATE.

66A:	IMPORTER IS INACTIVE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANS- ACTION (APPLICATION HI). IF THE IMPORTER NUMBER (H1 REC, POS 20-31) IS IN 'INACTIVE' STATUS ON THE IMPORTER DATABASE, THIS ERROR MESSAGE WILL BE GENERATED. TO REACTIVATE, THE FILER MUST SEND AN "ADD CF5106" TRANSACTION WITH THE IMPORTER'S FULL NAME AND ADDRESS INFORMATION.

ASE:	ENTRY NUMBER REQUIRED

WHEN A P60 IS TRANSMITTED THE ENTRY NUMBER DATA FIELD CANNOT BE BLANK.

AFA:	ELEC INVOICE INDICATOR INVALID

THE ELECTRONIC INVOICE INDICATOR IS SENT IN POSITION 56 OF THE EI 10 RECORD. IT INDICATES THAT THE ENTRY IS PART OF THE AII PROGRAM. THE ONLY INDICATOR ALLOWED IS 'E' IF THE ENTRY IS BEING TRANSMITTED AS AN AII ENTRY, OTHERWISE SPACE FILL.

VKS:	HLO: MAX 15 SORT FIELDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED FOR FORMULATE DEFAULT SORT CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

AFI:	DUMPING PYBL AMT INVALID;35 RECOR

THE PAYABLE ANTIDUMPING DUTY AMOUNT TRANSMITTED IN REC 35, POS 15-25 DOES NOT EQUAL THE SUM OF THE ANTIDUMPING LINE ITEM AMOUNTS TRANSMITTED IN REC(S) 60POS 33-42.

1GK:	MAIL FEE AMOUNT INVALID

FOR ENTRIES USING MODE OF TRANSPORTATION 50 (MAIL IMPORTATION), IF ANY DUTY IS DUE ON THE ENTRY, A DUTIABLE MAIL FEE OF $5.00 MUST BE TRANSMITTED IN THE 34 RECORD. ANY OTHER AMOUNT THAN $5.00 WILL GENERATE THIS ERROR MESSAGE.

4A3:	INVALID IN-BOND NUMBER

PAPERLESS MASTER IN-BOND NUMBERS (FORMAT VNN-NNNNNNNN) ARE TRANSMITTED TO ABI IN EITHER AN ENTRY SUMMARY TRANSACTION (EI 22 REC, POS 3-14) OR THE CARGO RELEASE DATA TRANSACTION (HI HA REC, POS 3-14). IF THE IN BOND NUMBER DOES NOT CONTAIN EIGHT DIGITS FOLLOWING THE CARRIER IDENTIFIER (VNN), THIS ERROR MESSAGE WILL RESULT. NOTE: IF THE EIGHTH DIGIT (CHECK DIGIT) IS INCORRECT, ERROR MESSAGE NUMBER 2CI (INBOND - INVALID CHECK DIGIT) WILL BE GENERATED INSTEAD OF THIS MESSAGE.

AD9:	OVERLAPPING INVOICE LINE RANGE

THIS MESSAGE OCCURS WHEN AN EI 42 RECORD IS SENT WITH OVERLAPPING INVOICE LINE RANGES. FOR EXAMPLE, IF INVOICE A IS SENT WITH A BEGINNING AND ENDING RANGE 0001-0004 AND INVOICE B HAS A BEGINNING AND ENDING RANGE OF 0004-0008, THIS MESSAGE WILL OCCUR BECAUSE '0004' OVERLAP.

03N:	B/L NBR.REQD W/MAS MIB MVMNT

THE USER IS REQUIRED TO ENTER A BILL OF LADING NUMBER FOR ANY ACTIVITY INVOICED AGAINST AN AUTOMATED MANIFEST - MANIFEST INBOND ITEM.

VNC:	OGA/LINE RLSE MUST BE INDICATED

LINE RELEASE ENTRIES ARE ELIGIBLE FOR THE FDA INTERFACE. THE PRODUCT/ MANUFACTURER MUST BE APPROVED BY BOTH CUSTOMS AND FDA BEFORE IT CAN GO ON LINE RELEASE. ONCE IT IS APPROVED IT IS CONSIDERED "MAY PROCEEDED" WHEN ENTERED. THE FDA INFORMATION IS THEN SENT VIA THE ENTRY SUMMARY TRANSACTION. THE FILER MUST SEND A "1" IN APPLICATION EI, REC 10, POS 80 TO INDICATE THAT THE FDA SHIPMENT WAS RELEASED VIA LINE RELEASE. IF THEY DO NOT SEND THIS INDICATOR, THIS ERROR MESSAGE WILL OCCUR.

 Next 10 >>Showing results 1 to 25 of 1405