ABI Error Message

79M:	TARIFF NBR NOT ON DATABASE

TARIFF NBR IS NOT FOUND ON EITHER THE HARMONIZED DATABASE. THE MOST COMMON CAUSE FOR THIS ERROR MESSAGE IS THAT A RECENT CHANGE TO THE TARIFF NUMBER HAS OCCURRED AND THE FILER HAS NOT RETRIEVED THE CHANGE. FILERS MUST KEEP UP WITH ALL HARMONIZED UPDATES IN ORDER TO KNOW WHICH TARIFF NUMBERS ARE VALID. IF THE TARIFF NUMBER RECEIVING THIS MESSAGE IS NO LONGER VALID, THE FILER SHOULD DO A HARMONIZED RANGE QUERY THROUGH ABI AND SHOULD EXAMINE THE DESCRIPTION RECORDS OF THE TARIFF NUMBERS RETURNED IN THE QUERY RESULTS TO DETERMINE WHICH TARIFF NUMBER IS THE REPLACEMENT FOR THE REJECTED TARIFF NUMBER.

99E:	INVALID ENTRY TYPE / AG LICENSE

THE ENTRY TYPE MUST BE '02', '07', '21', '22'. '26', '30', '31', '32', '34', '35', '37', OR '38' FOR AN AGRICULTURE LICENSE TO BE ENTERED.

216:	INVALID TARIFF NUMBER

TARIFF NUMBER BLANK OR NOT NUMERIC

840:	WARNING-GTB MUST HAVE 'P' RIDER

THIS IS ONLY A WARNING MESSAGE. THE GENERAL TERM BOND (TYPE 5) MUST HAVE A 'P' RIDER FOR DRAWBACK ENTRIES. THIS DOES NOT CAUSE THE ENTRY TO GO IN A REJECTED STATUS.

APP:	ACCEL. DISP. REQ. NOT APPLIC

A REQUEST FOR ACCELERATED DISPOSITION, INDICATED BY 'R', MAY BE SUBMITTED FOR TYPE 514 PROTESTS WHEN 90 DAYS FROM INITIAL FILING HAS ELAPSED AND NO CUSTOMS DECISION HAS BEEN RENDERED. EITHER THE FILING IS NOT A TYPE 514 PROTEST, THE 90 DAYS HAS NOT ELAPSED, OR A CUSTOMS DECISION HAS BEEN RENDERED.

VGN:	FD 701: UOM REQ IF QTY USED

IF A QUANTITY IS SENT IN THE FDA INTERFACE, REC FD02, POS 5-14, 19-28, 33-42, 47-56, 61-70 AND REC FD04, POS 5-14, A UNIT OF MEASURE (UOM) MUST BE TRANSMITTED. VALID FDA UNITS OF MEASURE ARE SHOWN ON PAGE OGA-31 OF THE CATAIR DOCUMENT. THESE UNITS ARE CONSIDERED TO BE "BASE UNITS" AND MUST BE EITHER THE LAST UNIT SENT (WHEN MORE THAN ONE QUANTITY/UOM PAIR IS ALSO TRANSMITTED) OR MUST BE THE UOM WHEN ONLY ONE QUANTITY IS SENT.

VHB:	ISIS INPUT BYPASSED/ ERRORS FOLLOW

THIS MESSAGE IS ISSUED IN CONJUNCTION WITH ERROR MESSAGE 1AS. IT MEANS THAT ABI REJECTED FDA'S ATTEMPT TO UPDATE (USUALLY A RELEASE) AN ENTRY THAT HAS GONE INTO ARCHIVE STATUS.

EIC:	INVALID PAYMENT TERMS TYPE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). PAYMENT TERMS MUST BE TRANSMITTED IN THE C02 REC, POS 6-75. EACH PAYMENT TERMS FIELD HAS A TWO CHARACTER "PAYMENT TERMS TYPE", WHICH MUST BE TRANSMITTED IN THE C02 REC, POS 4-5. THE LIST OF VALID PAYMENT TERMS TYPES IS ON PAGE AII-8 OF THE CATAIR. THE USE OF ANY OTHER CODE, OR A BLANK FIELD, IN THIS ELEMENT WILL GENERATE THIS ERROR MESSAGE

AJA:	NEW NBR NOT ASSIGNED, IMP ON FILE

FILER TRIED TO ADD AN IMPORTER NAME AND ADDRESS (APPLICATION 'TI') AND REQUESTED A CUSTOMS-ASSIGNED NUMBER; THIS NAME AND ADDRESS ARE ALREADY LISTED IN THE 5106 FILE. FILER SHOULD USE APPLICATION 'KN' TO GET THE IMPORTER'S NUMBER. IF THE IMPORTER"S NUMBER IS: FILER WIILL RECEIVE: IRS # ENCRYPTED NUMBER SSN ENCRYPTED NUMBER USCS-ASSIGNED #, OLD OR NEW FORMAT USCS-ASSIGNED NUMBER

8Q9:	BILL REFUND IND MUST BE A B OR R

BILL REFUND INDICATOR CANNOT BE ANYTHING BUT A "B" OR "R".

VMC:	HLO: SORT ORDER MUST BE A/D

THE SORT ORDER CODE IS REQUIRED AND MUST BE A=ASCENDING D=DESCENDING.

828:	REFERENCE NUMBER VOIDED

THIS ERROR MESSAGE OCCURS WHEN THE REFERENCE CF 4811# USED IN A DRAWBACK TRANSACTION IS VOIDED IN THE IMPORTER FILE. THIS MESSAGE ALSO OCCURS FOR RECONCILIATION WHEN THE REFERENCE CF 4811# IS VOIDED.

B08:	MID CODE NOT ON FILE

INPUT MANUFACTURER IDENTIFIER FIELD DOES NOT EXIST ON THE MANUFACTURER DATABASE. THIS ERROR IS GENERATED IN RESPONSE TO A MANUFACTURER QUERY, ABI APPLICATION $N.

632:	AMOUNT CANNOT EXCEED 9-DIGITS

TAX, DUTY, CVD OR ADD AMOUNT IS TOO LARGE

VPV:	D13 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF THERE ARE 2ND OR 3RD QUANTITY/UNIT OF MEASURE, THEY ARE SENT IN THIS CONDITIONAL RECORD. IF THIS RECORD IS SENT WITHOUT DATA THIS REJECT MESSAGE WILL BE GENERATED.

AIC:	OGA FORM DATA REQUIRED

THE HARMONIZED NUMBER ON THE LINE GENERATING THIS REJECT IS CODED AS "DATA REQUIRED" (E.G.FD2) AND THE FILER IS SET TO OPERATIONAL FOR THE NAMED OGA INTERFACE AND IS NOT SENDING THE REQUIRED DATA.

2AX:	TOTAL VALUE REQUIRED

THIS MESSAGE OCCURS WHEN A CERTIFIED EI IS TRANSMITTED, AND VALUE IS EITHER BLANK OR ZERO FOR EACH TARIFF NUMBER AND FOR ALL LINE ITEMS. SENDING A TOTAL ENTERED VALUE IN THE 90 RECORD DOES NOT RESOLVE THIS ERROR. LINE ITEM VALUES MUST BE TRANSMITTED

AFJ:	CVD BOND AMT/TYPE INVALID; 35 REC

THE CVD BOND TYPE IN REC 35, POS 37 MUST BE A "0" OR "1". THE USE OF ANY OTHER NUMERIC, SPACE OR SPECIAL CHARACTER WILL RESULT IN THIS ERROR MESSAGE. IF THE BONDED COUNTERVAILING DUTY AMOUNT (35 REC, POS 26-36) DOES NOT AGREE WITH THE COUNTERVAILING DUTY AMOUNT IN THE 60 REC, POS 3-12, THIS ERROR MESSAGE WILL BE GENERATED. IF BOTH AMOUNTS AGREE, BUT DO NOT EQUAL THE CALCULATED COUNTERVAILING DUTY AMOUNT, AS DETERMINED BY ACS, ERROR MESSAGE AAZ "ADD/CVD DUTY COMP MISMATCH" WILL RESULT.

AR7:	NOTIFY SUB. DATA REJECTED

NOTIFY SUBSTITUTE DATA REJECTED.

EJK:	INVALID TOTAL INVOICE VALUE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C81 RECORD, POS 8-22 (WITH TWO DECIMAL PLACES OCCUPYING THE LAST TWO POSITIONS) DISPLAYS THE TOTAL INVOICE VALUE FOR THE INVOICE BEING TRANSMITTED. THIS FIGURE IS THE SUM OF THE VARIOUS C33 RECORD INVOICE AMOUNTS, WITH ADJUSTMENTS FOR VARIOUS ALLOWANCES AND CHARGES, AS OUTLINED ON PAGE AII-59, NOTE 1. IF THE TOTAL OF ALL C33 AND RELATED RECORDS, ROUNDED TO TWO DECIMAL PLACES, DOES NOT EXACTLY AGREE WITH THE FIGURE REPORTED IN POS 8-22 OF THE C81 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

VAO:	ADDITIONAL PENDING MIDS FOUND

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT (APPLICATION EI). IF MORE THAN 10 LINES EXIST ON THE ENTRY AND THE MID(S) IDENTIFIED FOR LINES 11 OR HIGHER ARE NOT ON THE MID FILE, THIS MESSAGE IS GENERATED.

16G:	TARIFF NO. MISSING OR UNRELATED

THIS ERROR MESSAGE HAS OCCURRED IN WATCH ENTRIES WHERE THERE ARE MORE THAN TARIFF NUMBERS INVOLVED AND ONE OF THE TARIFF NUMBERS IS NOT RELATED. SEE TARIFF FILE TO DETERMINE PROPER COMBINATIONS.

VID:	DT HS7: BLANK VIN POSITION: 2

THIS MESSAGE IS GENERATED WHEN AN ENTRY SUMMARY TRANSACTION IS USED TO REPORT DOT DATA VIA ABI. IF THE FILER USES THE DT03 TO REPORT VEHICLE IDENTIFICATION NUMBERS (VIN), THE FIRST TWO VINS BEING REPORTED MUST BE IN POSITIONS 5-21 AND 22-38 OF THE DT03 RECORD. IF THE SECOND VIN FIELD IS BLANK AND THE FILER USES POSITIONS 39-55 TO REPORT THE SECOND VIN, THIS ERROR MESSAGE WILL BE GENERATED.

VKR:	HLN:MAX 5 OVERRIDE FLDS EXCEEDED

A MAXIMUM OF FIVE FIELDS MAY BE SELECTED FOR FORMULATE OVERRIDE SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

ACW:	STATE CODE MUST BE 'FN'

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADDED 5106" TRANSACTION, APPLICATION IDENTIFIER TI. IF THE ABI FILER REQUESTS A CUSTOMS-ASSIGNED NUMBER FOR A FOREIGN-BASED COMPANY, AND THE COMPANY IS LOCATED IN A COUNTRY OTHER THAN CANADA, THE INPUT RECORDS MUST SHOW "FN" AS THE STATE CODE. IF THE T2 RECORD, POS 68-69 DOES NOT REFLECT "FN" OR IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

 Next 10 >>Showing results 1 to 25 of 1405