ABI Error Message

VP7:	DIST IN D01 REC NOT = B REC

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE DISTRICT/PORT OF CLAIM IS SENT IN THE D01 RECORD, POSITIONS 7-10. IT MUST MATCH THE PROCESSING DISTRICT/PORT CODE IN THE 'B' RECORD, POSITIONS 4-7.

VMY:	TEAM REVIEW STRATIFIED COMP LINE

THIS ERROR IS GENERATED WHEN THERE IS A LINE LEVEL HIT FOR COMPLIANCE AND THE SUMMARY IS IN CUSTOMS STATUS.

EJO:	LOCATION CODE NOT ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). LOCATION DATA (IN CODED FORMAT) IS TRANSMITTED IN THE C13 (OR C43) RECORD. IF THE LOCATION CODE INDICATOR IS "25", THE CODED LOCATION IN POS 11-15 MUST BE A VALID CODE FROM THE CENSUS SCHEDULE K. IF THE INDICATOR IS "26", THE CODED LOCATION MUST BE A VALID CODE FROM CENSUS SCHEDULE D. IF THE INDICATOR IS "66", THE LOCATION CODE MUST BE A VALID ISO COUNTRY CODE .

170:	INVALID MANUFACTURER NUMBER

MINIMUM CONSTRAINTS FOR VALID MANUFACTURER NUMBER INCLUDE: 1) ENTIRE NUMBER INCLUDING ISO CODE MUST BE AT LEAST 7 ALPHA OR NUMERIC CHARACTERS LONG AND IT MUST BE LEFT JUSTIFIED. 2) IF THE MID INCLUDES PIECE FOUR (LARGEST NUMBER IN STREET ADDRESS), NUMERIC CHARACTERS CANNOT BE PRECEDED BY MORE THAN 8 ALPHA CHARACTERS. NOTE: AS OF JUNE 27, 2000, WHEN THIS MESSAGE IS GENERATED, ABI IS NOT INDICATING WHICH LINE OF THE SUMMARY IS INVALID.

99A:	INVALID AG LICENSE FORMAT

THE ENTERED AGRICULTURE LICENSE MUST BE IN ONE OF THE FOLLOWING FORMATS: 'N-AA-NNN-N' OR'N-A -NNN-N' WHERE 'N' =NUMERIC, 'A'=ALPHA, AND ' '=SPACE.  1. OR SUNDAY.

4JB:	QUANTITY MUST BE NUMERIC

MUST BE EITHER NUMERIC OR BLANK.

VH4:	DT HS7: INV LINE #/SEQ

IF MULTIPLE SETS OF DOT DATA RE-TRANSMITTED FOR THE SAME CUSTOMS LINE NUMBER (WHETHER ON THE HI OR EI APPLICATION), EACH DT01 RECORD MUST BE INCREMENTED IN POS 5-7 TO REFLECT "001" FOR THE FIRST SET OF DATA, "002" FOR THE SECOND SET, ETC. IF A NUMBER IS REPEATED IN THE DOT LINE NUMBER FIELD OR IF A NUMBER IS SKIPPED (IE FROM 001 TO 003), THIS MESSAGE WILL RESULT.

VN3:	CERT MFGR UOM INVALID

IN THE DRAWBACK MODULE IF A UNIT OF MEASURE IS GIVEN ON THE CM (CERT MFGR), MUST BE A VALID 3 ALPHA-NUMERIC CHARACTER CODE (E.G. BBL, CWT, PCS). ALSO, IT MEANS THAT IF A QUANTITY IS GIVEN, A UNIT OF MEASURE MUST BE REPORTED.

VNH:	FD 701: BASE UNIT MUST BE LAST

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31.

1DB:	VESSEL NAME REQUIRED

FOR OCEAN SHIPMENTS, MODE OF TRANSPORTATION 10 OR 11, THE NAME OF THE IMPORTING VESSEL IS REQUIRED. THIS IS TRANSMITTED IN THE 20 REC, POS 18-27 IN THE SUMMARY INPUT DATA (APPLICATION EI). IF THE VESSEL NAME IS NOT TRANSMITTED, THIS ERROR  MESSAGE WILL RESULT. UNLIKE THE CARGO RELEASE DATA INPUT TRANSACTION, USE OF THE VESSEL CODE (20 REC, POS 3-7) IS NOT BE PERMITTED AS A SUBSTITUTE FOR THE VESSEL NAME IN ENTRY SUMMARY INPUT TRANSMISSIONS.

VHP:	DT HS7: INVAL CONTRACT/STMNT CERT

ONLY A "Y" IS PERMITTED IN REC DT01, POS 36 TO INDICATE THE PRESENCE OF THE IMPORTERS SUBSTANTIATING STATEMENT/CONTRACT/OR MANUFACTURER'S CONFIRMATION LETTER. ANY OTHER CHARACTER WILL RESULT IN THIS ERROR MESSAGE.

0JN:	FIRMS CODE REQUIRED

ENTRIES WHICH REQUEST CARGO SELECTIVITY PROVISIONAL RESULTS MUST CONTAIN A FIRMS CODE WHICH IS "ACTIVE" AND WHICH REPRESENTS A VALID CARGO EXAMINATION SITE. (NOT A CUSTOMS ADMINISTRATIVE SITE). IF THE FIRMS CODE, FROM THE FIRMS FILE DATABASE, IS NOT ACTIVE, THE INPUT TRANSACTION WILL BE REJECTED WITH THIS ERROR MESSAGE.

89O:	MPF REQUIRED

THIS ENTRY REQUIRES A MERCHANDISE PROCESSING FEE BUT NONE WAS ENTERED. MPF IS DUE ON ALL ENTRIES UNLESS OTHERWISE EXEMPT. SOME OF THE EXEMPTIONS ARE: -- ALL TARIFF NUMBERS IN CHAPTER 98, EXCEPT 98020060NN AND 98020080NN. -- ENTRIES FROM INSULAR POSSESSIONS OF THE UNITED STATES. -- ENTRIES FROM CARRIBEAN INITIATIVE COUNTRIES (SPI E) OR LDDC COUNTRIES. -- INFORMAL ENTRIES (ALTHOUGH AN INFORMAL MPF IS REQUIRED AT THE ENTRY LEVEL.) -- NAFTA ENTRIES FROM CANADA.

VHK:	DT HS7: DT02 REQUIRED

REGARDLESS OF WHICH BOX IS USED (REC DT01, POS 8-9) IF THE CLARIFICATION CODE IN THE DT01 RECORD IS "V", THEN A DT02 RECORD IS REQUIRED. HOWEVER, IF BOX 05 IS USED AND THE CLARIFICATION CODE IN THE DT01 RECORD IS "E" OR "T", A DT02 RECORD IS STILL REQUIRED (SEE COMMENTS FOR MESSAGE VHG). AS OF JUNE 2000, ALL BOXES EXCEPT 2B AND 11 REQUIRE A DT02 RECORD IF THE CLARIFICATION CODE IN THE DT01 RECORD IS 'V'.

J05:	AWB MUST BE 8 CHARACTERS

HOUSE AIR WAYBILLS MUST CONTAIN AT LEAST 8 CHARACTERS. IF FEWER THAN 8 CHARACTERS ARE TRANSMITTED IN THE INPUT RECORDS (EI, 22 REC, POS 27-38, HI, HA REC, POS 27-38), THIS ERROR MESSAGE WILL RESULT. THE "8-CHARACTER" AWB NUMBER REFERS TO THE DIGITS FOLLOWING THE AIR CARRIER'S PREFIX (THREE CHARACTER NUMERIC IN POS 15-17 OF THE 22 REC IN EI OR POS 15-17 OF THE HA REC IN HI). IF THE PORT OF UNLADING IS AN AMS AIRPORT, ONLY 11- CHARACTERS (PREFIX + 8 DIGIT AWB) IS PERMITTED. SOME CARRIERS PERIODICALLY USE A 9-CHARACTER AWB FOLLOWING THE PREFIX FOR INTERNAL USES. THIS TYPE OF AWB WILL NOT BE ACCEPTED AT AIR AMS PORTS, BUT WILL BE ACCEPTED AT A NON-AMS PORT (SUCH AS 2895, THE FEDEX COURIER FACILITY IN OAKLAND, CA).

AFA:	ELEC INVOICE INDICATOR INVALID

THE ELECTRONIC INVOICE INDICATOR IS SENT IN POSITION 56 OF THE EI 10 RECORD. IT INDICATES THAT THE ENTRY IS PART OF THE AII PROGRAM. THE ONLY INDICATOR ALLOWED IS 'E' IF THE ENTRY IS BEING TRANSMITTED AS AN AII ENTRY, OTHERWISE SPACE FILL.

B35:	INVALID OR MISSING ZIP CODE

THIS MESSAGE OCCURS IN THE $I (ADD MANUFACTURER) TRANSACTION WHEN THE FILER SENDS AN INVALID ZIP CODE OR IS SENDING BLANKS IN THE ZIP CODE FIELD.

299:	INVALID INFORMAL ENTRY NUMBER

INVALID EIGHT DIGIT ENTRY NUMBER FOR INFORMAL COLLECTION.

AF7:	SUBHOUSE REQUIRES HOUSE

THIS MESSAGE APPLIES TO THE ENTRY SUMMARY TRANSACTION (APPLICATION EI). IF AN AIR SHIPMENT IS BEING REPORTED, AND A SUBHOUSE AIR WAYBILL IS SENT IN THE 22 REC, POS 39-50, A HOUSE BILL MUST ALSO BE TRANSMITTED IN THE 20 RE POS 27-38. IF THE HOUSE BILL IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

4GP:	ONLY COUNTRY VALID FOR OPTION C

THIS MESSAGE IS GENERATED IN REPLY TO AN ABI QUOTA QUERY. IF THE FILER REQUESTS ALL VISA RECORDS FOR A GIVEN COUNTRY OF ORIGIN (OPTION C IN POS 25 OF THE U1 INPUT RECORD), THE INPUT RECORD CANNOT ALSO REQUEST INFORMATION FOR A GIVEN VISA NUMBER, TARIFF NUMBER OR CATEGORY NUMBER IN THE SAME U1 INPUT RECORD

2J0:	SURETY INVALID OR NOT ON FILE

THIS REJECT MESSAGE REFERS TO THE SURETY REPORTED, IF ANY, FOR ANTIDUMPING OR COUNTERVAILING DUTY TRANSACTIONS. (MESSAGE 2AL IS THE EQUIVALENT ERROR MESSAGE FOR INVALID SURETY CODES REPORTED IN THE 10 RECORD). ADA OR CVD SURETY CODES ARE TRANSMITTED IN THE 35 REC, POS 49-51. SURETY CODES ARE REQUIRED ONLY WHEN THE BONDED INDICATOR FOR THE CASE NUMBER BEING REPORTED IS "1" (REPORTED IN POS 14 OF THE 35 REC). FOR ENTRIES WITH MULTIPLE ADD/CVD LINES, IF AT LEAST ONE LINE IS A BONDED CASE, THE SURETY CODE IN THE 35 RECORD IS REQUIRED. "000" IS THE MOST FREQUENTLY REPORTED INCORRECT SURETY CODE AND WILL CAUSE THIS MESSAGE TO BE ISSUED BY ACS. IF BLANKS ARE TRANSMITTED FOR THIS ELEMENT, MESSAGE 2AL WILL BE ISSUED.

8WL:	INVALID CARRIER CODE

THIS ERROR MESSAGE OCCURS IN THE BILL OF LADING UPDATE (LN) TRANSACTION WHEN A FILER SENDS AN INVALID CARRIER CODE IN THE L1 RECORD, POSITIONS 32-35.

95T:	52 REC - 'CN' SWPM IND INVALID

THE REQUIRED SOLID WOOD PACKING MATERIAL INDICATOR MUST BE '1' OR '2'.

4CC:	ENTRY TYPE MUST BE QUOTA

COMMODITIES LISTED ON THE HARMONIZED TARIFF DATABASE FILE THAT ARE SUBJECT TO QUOTA REPORTING FROM SELECTED COUNTRIES MUST BE ENTERED USING AN APPROPRIATE QUOTA ENTRY TYPE CODE. CURRENTLY, "02" (CONSUMPTION QUOTA ENTRY) OR "07" (COMBINATION QUOTA/ADD OR CVD ENTRY TYPE) ARE THE TWO QUOTA ENTRY TYPES.

VMC:	HLO: SORT ORDER MUST BE A/D

THE SORT ORDER CODE IS REQUIRED AND MUST BE A=ASCENDING D=DESCENDING.

 Next 10 >>Showing results 1 to 25 of 1405