ABI Error Message

BRJ:	AGGREGATE: ALL AMTS MUST BE ZERO

IF THE RECON IS AN AGGREGATE, ALL MONETARY AMOUNTS ON THE 'R20' IMPORT ENTRY ASSOCIATION RECORDS MUST BE ZERO.

Q18:	PAYOR UNIT # NOT ON FILE

PAYOR UNIT # NOT DEFINED ON DATABASE - THE PAYOR UNIT NUMBER PROVIDED IN THE 'QT' RECORD IS NOT ASSIGNED TO THAT IMPORTER ON THE DATA FILE.

AEN:	ERROR IN A32 REC; RLSE 1

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. "1F5 RELEASE NOT ON FILE") IN A CONSOLIDATED ENTRY SUMMARY SITUATION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE FIRST RELEASE IN THE 32 RECORD.

VBX:	DT HS7: INVALID VEH. ELIGIBIL. #

THIS ELEMENT MUST BE USED WHEN BOX 03 IS INDICATED ON THE DT01 RECORD. IT IS A SIX POSITION FIELD IN THE FORMAT AAANNN, WHERE AAA MAY EQUAL "VSA", "VCP" OR "VSP", FOLLOWED BY THREE NUMERICS FROM 001 THROUGH 999. THE VEHICLE ELIGIBILITY NUMBER TRANSMITTED BY THE FILER MUST COME FROM A LIST ISSUED BY THE DOT WHICH COVERS EVERY VEHICLE MANUFACTURED WITHIN THE LAST 25 YEARS. ***NOTE**** IF THE INSTANT IMPORTATION IS FOR A VEHICLE WHICH WILL BE ADDED TO THE NEXT REVISION OF THE DOT NON-CONFORMING VEHICLE LIST, THE APPROPRIATE ELIGIBILITY INDICATOR IS "PET" (WHICH STANDS FOR PETITION TO ADD NEW VEHICLE TO THE LIST). NO NUMERICS ARE NECESSARY WHEN PET IS TRANSMITTED.

SG2:	INVALID CANADA SUGAR CERT FORMAT`

A CORRECT CERTIFICATE MUST BE 7 ALPHA-NUMERIC CHARACTERS WITH NO SPECIAL CHARACTERS. EITHER THE GIVEN DATA CONTAINS SPECIAL CHARACTERS OR IS NOT A TOTAL OF 7 CHARACTERS IN LENGTH.

40T:	MX SPI REQUIRED

AN SPI OF 'MX' MUST BE ENTERED FOR TARIFF NUMBER 9802008055

VDP:	FTZ NUMBER INVALID

THE FTZ NO IN REC 20, POS 8-14 (EI APPLICATION) OR REC H2, POS 60-66 (HI APPLI- CATION) IS MANDATORY FOR ENTRY TYPE 06. IT MUST START WITH "FTZ" AND BE FOLLOWED BY FOUR NUMERICS. IF THE FTZ NO IS LESS THAN FOUR NUMERICS, THE NUMBER MUST BE PRECEDED BY ZEROS I.E. "FTZ0001".

AR2:	NOTIFY SUB DATA NOT APPLICABLE

NOTIFY SUBSTITUTE TYPE NOT APPLICABLE.

VK2:	HLS: OP TYPE MUST BE 'C' OR 'M'

THE OPERAND TYPE CODE MUST BE 'C' FOR CONSTANT OF 'M' FOR MAP. WHEN 'C' THE OPERAND MUST BE A DISPLAY CONSTANT IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X ,....' WHEN 'M' THE OPERAND MUST BE A BMS MAP FIELD NAME.

12O:	INVALID FIRMS CODE

THE FIRMS CODE MUST BE 4 ALPHA NUMERIC CHARACTERS IN LENGTH.

04G:	PC: MOT=AIR BUT V/F/T MISSING

ENTRY IS PAIRED CITIES, CARRIER CODE IS INVALID, MODE OF TRANSPORTATION IS AIR, BUT V/F/T IS MISSING.

RB2:	INVALID INCREASE-REFUND IND

THE INCREASE/REFUND INDICATOR IN THE ABI 'RA' RECON TRANSACTION 'R10' RECORD MUST = '1', '2', OR '3'.

ACW:	STATE CODE MUST BE 'FN'

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADDED 5106" TRANSACTION, APPLICATION IDENTIFIER TI. IF THE ABI FILER REQUESTS A CUSTOMS-ASSIGNED NUMBER FOR A FOREIGN-BASED COMPANY, AND THE COMPANY IS LOCATED IN A COUNTRY OTHER THAN CANADA, THE INPUT RECORDS MUST SHOW "FN" AS THE STATE CODE. IF THE T2 RECORD, POS 68-69 DOES NOT REFLECT "FN" OR IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

AD9:	OVERLAPPING INVOICE LINE RANGE

THIS MESSAGE OCCURS WHEN AN EI 42 RECORD IS SENT WITH OVERLAPPING INVOICE LINE RANGES. FOR EXAMPLE, IF INVOICE A IS SENT WITH A BEGINNING AND ENDING RANGE 0001-0004 AND INVOICE B HAS A BEGINNING AND ENDING RANGE OF 0004-0008, THIS MESSAGE WILL OCCUR BECAUSE '0004' OVERLAP.

BE3:	BLANK CANADIAN EXCISE NBR INVALID

IF AN EI APPLICATION INCLUDES A '57' RECORD, THE CANADIAN EXCISE NUMBER ON MUST BE NON-BLANK.

AFR:	STMT BRANCH/BROKER MISMATCH

THIS MESSAGE OCCCURS WHEN A FILER SENDS A STATEMENT BRANCH CODE IN POSITIONS 49-50 OF THE EI 20 RECORD ALONG WITH A STATEMENT INDICATOR AND STATEMENT DATE BUT THE BRANCH CODE HAS NOT BEEN SET TO OPERATIONAL IN THE ABE FILE. ALSO, IF THE FILER HAS BEEN SET TO 'Y' FOR BRANCH ON THE ABI RPOFILE RECORD, BUT THEN NEGLECTS TO INCLUDE A BRANCH DESIGNATION IN THE 20 RECORD (POS 49-50), THIS MESSAGE WILL OCCUR. IN A RECONILIATION ENTRY, THE R17 REC, POS 11-12, MUST REFLECT A CLIENT BRANCH DESIGNATION IF THE ABEI RECORD IS SET TO 'Y' FOR THIS FEATURE. THIS MESSAGE WILL ALSO OCCUR IF THE FILER USES THE 'STATEMENT ADD/DELTE' APPLICATION (HP) AND SENDS BRANCH DESIGNATION IN POS 25-26.

LU4:	INVALID LUMBER PERMIT NUMBER

IF THE ABI FILER REPORTS A LUMBER PERMIT TYPE (40 REC, POS 70-72), A NINE- POSITION NUMERIC LUMBER PERMIT NUMBER IS REQUIRED IN THE 51 REC, POS 57-65. IF THE PERMIT NUMBER IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

370:	ENTRY BELONGS TO ANOTHER DD/PP

THIS ERROR MESSAGE OCCURS WHEN A FILER SENDS AN ENTRY SUMMARY TRANSACTION FOR AN ENTRY THAT WAS RELEASED (OR AT LEAST ACCEPTED) AT ANOTHER PORT. THE SELECTIVITY RECORD WILL SHOW THE PORT CODE ESTABLISHED BY THE FILER'S FIRST SUCCESSFUL ABI TRANSMISSION. IF THE FILER'S SUMMARY INPUT PORT CODE (10 REC, POS 4-7) DOES NOT MATCH THE PORT CODE ON THE SELECTIVITY RECORD, THIS ERROR MESSAGE WILL RESULT. THIS ERROR WILL ALSO RESULT IF THE FILER TRANSMITS A CARGO RELEASE TRANSACTION THAT DOES NOT MATCH THE PORT CODE IN THE H1 REC, POS 4-7, TO THE PORT CODE SHOWN ON THE ENTRY MASTER FILE RECORD FROM THE FILER'S PRIOR TRANSMISSION. IF THE SELECTIVITY RECORD PORT CODE IS INCORRECT, THE FILER SHOULD FOLLOW LOCAL PROCEDURES IN ORDER TO BE ABLE TO RETRANSMIT THE SUMMARY WITH THE CORRECT PORT CODE ONCE THE SELECTIVITY RECORD HAS BEEN CHANGED. IF THERE IS AN ENTRY SUMMARY ON FILE, AND STILL IN ABI STATUS, THE FILER MAY DELETE THE SUMMARY AND RETRANSMIT IT WITH THE CORRECT PORT CODE.

RBQ:	RECONCILIATION DDPP NOT FOUND

THIS MESSAGE MEANS THAT THE FILER HAS USED AN IMPOSSIBLE DDPP IN THE RECON SUMMARY TRANSMISSION VIA ABI.

054:	ENTRY NBR NOT ASSIGNED TO BROKER

ENTRIES FILED THROUGH SEPTEMBER 30, 1986 HAVE THE FOLLOWING NUMBER FORMAT: FISCAL YEAR (2 DIGITS); SEQUENCE NUMBER (6 DIGITS); CHECK DIGIT (1 DIGIT) ENTRIES FILED AFTER SEPTEMBER 30, 1986 HAVE THE FOLLOWING NUMBER FORMATS: FILER CODE (3 CHARACTERS, ALPHA NUMERIC); SEQUENCE NUMBER (7 DIGITS); CHECK DIGIT (1 DIGIT) USUALLY THIS ERROR IS INVOKED WHEN THERE IS NO MATCH FOR THE ENTRY NUMBER FOUND IN THE ACS ENTRY SUMMARY FILES- USER COULD HAVE MADE A TYPOGRAPHICAL ERROR IN THE ENTRY NUMBER.

1DB:	VESSEL NAME REQUIRED

FOR OCEAN SHIPMENTS, MODE OF TRANSPORTATION 10 OR 11, THE NAME OF THE IMPORTING VESSEL IS REQUIRED. THIS IS TRANSMITTED IN THE 20 REC, POS 18-27 IN THE SUMMARY INPUT DATA (APPLICATION EI). IF THE VESSEL NAME IS NOT TRANSMITTED, THIS ERROR  MESSAGE WILL RESULT. UNLIKE THE CARGO RELEASE DATA INPUT TRANSACTION, USE OF THE VESSEL CODE (20 REC, POS 3-7) IS NOT BE PERMITTED AS A SUBSTITUTE FOR THE VESSEL NAME IN ENTRY SUMMARY INPUT TRANSMISSIONS.

ADP:	NON ABI ENTRY ON FILE

THIS ERROR MESSAGE OCCURS WHEN A SELECTIVITY TRANSACTION IS SENT FOR AN ENTRY NUMBER THAT IS ALREADY IN THE SELECTIVITY FILE AS A NON-ABI ENTRY.

APM:	VOIDANCE REQ. IND. INVALID

A REQUEST FOR VOIDANCE OF DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 90 DAYS AFTER PROTEST HAS BEEN DENIED BY CUSTOMS. THE VALUE SUBMITTED IN THE VOIDANCE REQUEST FIELD IS NOT 'R'.

VNX:	IMPORT SUMM DATE MUST BE > SPACES

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THERE IS NO ENTRY SUMMARY DATE IN ACS FOR THE DESIGNATED IMPORT. IN ALL PROBABILITY, THIS MESSAGE WILL APPEAR IN CONJUNCTION WITH MESSAGE VNW.

42B:	LINE RELEASE ENTRY ON FILE

THIS ERROR MESSAGE OCCURS IN THE "REVISED FILER DATE" (DN) TRANSACTION WHEN A FILER TRANSMITS A REVISED ENTRY DATE IN THE DN01 RECORD, POSITIONS 19-24,WHEN THE ENTRY HAS BEEN RELEASED VIA LINE RELEASE. LINE RELEASE SETS THE ENTRY DATE AND CANNOT BE REVISED.

 Next 10 >>Showing results 1 to 25 of 1405