ABI Error Message

0MD:	DIST/PORT REQUIRED FOR ENTRY NBR

THIS MESSAGE IS GENERATED WHEN THE ENTERED ENTRY NUMBER IS DETECTED AS HAVING AN INVALID CHECK BASED ON NEW/OLD ENTRY NUMBER CHECK DIGIT CALCULATION.

17J:	MORE THAN ONE APPLICATION CODE

MORE THAN ONE APPLICATION (B TO Y) TYPE WAS SUBMITTED WITHIN THE Z SET.

RBO:	RECON TEAM INVALID FOR DDPP

THIS MESSAGE WILL MOST OFTEN OCCUR WITH MESSAGE 'RBI'. FOR RECONCILIATION, MESSAGE MEANS THAT THE DDPP/TEAM COMBINATION IS NOT CORRECT. THERE IS A DIRECT CODED LINK BETWEEN THE VALID FILING DDPP CODES AND THE VALID TEAM CODES.

ARG:	PROTESTANT TYPE REQUIRED

A VALID VALUE IS REQUIRED IN THE PROTESTANT TYPE FIELD VALID VALUES ARE: D - DRAWBACK CLAIMANT F - FOREIGN MAUFACTURER/PRODUCER/EXPORTER I - IMPORTER/CONSIGNEE M - MASTER OF VESSEL S - SURETY V - VESSEL OPERATOR O - OTHER

ST2:	NO PEVIOUS SET HEADER PROCESSED

A SET ITEM (SECONDARY SPI OF 'V') WAS ENTERED WITHOUT A SET HEADER (SECONDARY SPI OF 'X') LINE IMMEDIATELY PRECEDING THIS LINE.

04C:	UNLADING DIST/PORT NOT NUMERIC

PORT OF UNLADING MUST BE NUMERIC

OMP:	MANUFACTURER NUMBER REQUIRED

MANUFACTURER NUMBER IS REQUIRED FOR ENTRIES 01 02 03 06 07 11 12 21 31 32 34 38 51 52.

ADS:	RLSE ON FILE-CONSL NOT ALLOWED

AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI) CANNOT USE AN ENTRY NUMBER THAT WAS PREVIOUSLY USED IN A RELEASE TRANSACTION. IF EITHER THE SELECTIVITY FILE OR THE ENTRY HEADER FILE SHOWS A RELEASE ON THE ENTRY NUMBER IN QUESTION, THAT NUMBER CANNOT BE USED IN THE SUMMARY INPUT, 10 REC, POS 59-70. THIS MESSAGE WILL BE GENERATED IF THE ENTRY NUMBER HAS ALREADY BEEN USED FOR A RELEASE TRANSACTION.

VHS:	DT HS7: MODEL REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO A DOT INTERFACE RECORD (DT02). IF THE FILER TRANSMITS A DT02 RECORD WITH THE VEHICLE IDENTIFICATION DATA, A MODEL NAME IS REQUIRED IN POS 20-34 OF THE DT02 RECORD. IF THE MODEL NAME IS LEFT BLANK, THIS MESSAGE WILL RESULT.

BRE:	INVALID NAFTA ISSUE

FILER HAS ATTEMPTED TO FILE A RECON FOR A NAFTA ISSUE AGAINST AN IMPORT ENTRY THAT IS NOT FLAGGED FOR NAFTA RECONCILIATION.

484:	ULTIMATE CONSIGNEE NOT ON FILE

THE CONSIGNEE NUMBER, TRANSMITTED IN THE SUMMARY INPUT IN REC 10, POS 20-31, MUST BE LISTED ON THE IMPORTER DATABASE. IF THE CARGO RELEASE APPLICATION (HI) IS USED, THE CONSIGNEE NUMBER TRANSMITTED IN THE H2 REC, POS 11-22, MUST BE LISTED ON THE IMPORTER DATABASE. IF THE CONSIGNEE NUMBER IS NOT ON FILE, THIS WARNING MESSAGE WILL RESULT (THIS IS NOT A REJECTION MSG). OTHER APPLICATIONS THAT WILL RECEIVE THIS ERROR MESSAGE INCLUDE THE AUTOMATED INVOICE INTERFACE (CI). THIS MESSAGE CAN BE A REJECT IF THE ENTRY INVOLVES FDA REGULATED MERCHANDISE BEING SENT THROUGH THE FDA INTERFACE. THE ULTIMATE CONSIGNEE MUST BE ON FILE BEFORE SELECTIVITY RUNS BECAUSE FDA REQUIRES AN ULTIMATE CONSIGNEE. FILER MUST DO A 5106 UPDATE AND RE-TRANSMIT THE ENTRY.

299:	INVALID INFORMAL ENTRY NUMBER

INVALID EIGHT DIGIT ENTRY NUMBER FOR INFORMAL COLLECTION.

EJV:	INBOX IND MUST BE 'R' OR SPACE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C01 REC, POS 56, PROVIDES THE FILER AN OPPORTUNITY TO INDICATE IF THE INVOICE BEING TRANSMITTED IS AN INITIAL INPUT (SPACE FILL THE POSITION) OR IS IN RESPONSE TO AN ABI REJECTION FROM CUSTOMS WHICH REQUESTED THE TRANSMISSION OF THE INSTANT INVOICE. IN THE LATTER CASE, THE ACCEPTABLE VALUE FOR THIS FIELD IS "R". ANY OTHER CHARACTER TRANSMITTED IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

EJ0:	NEGATIVE AMT IND NOT 'N' OR ' '

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF THE TOTAL AMOUNT OF CHARGES REPORTED IN ALL C17/C18 RECORDS (CODES "S" OR "C" ON THE C17 REC) EXCEED THE TOTAL OF ALL ALLOWANCE REPORTED IN ALL C17/C18 (CODES "A" OR "R" ON THE C17 RECORD), THE NEGATIVE AMOUNT INDICATOR SHOULD BE LEFT BLANK (" ").IF THE REVERSE IS TRUE, THEN THE NEGATIVE AMOUNT INDICATOR MUST BE "N". ANY OTHER CHARACTER IN THIS FIELD (C84 REC, POS 34) WILL RESULT IN THIS ERROR MESSAGE.

APF:	SIGNATURE CERT. REQUIRED

CERTIFICATION OF SIGNATURE, INDICATED BY AN "X", IS REQUIRED IN LIEU OF A SIGNATURE FOR THE AUTOMATED ENVIRONMENT.

EJL:	TOTAL SUBJECT TO US DUTY WRONG

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C81 RECORD, POS 53-67 (WITH TWO DECIMAL PLACES OCCUPYING THE LAST TWO POSITIONS) DISPLAYS THE TOTAL VALUE SUBJECT TO DUTY FOR THE INVOICE. THIS FIGURE IS THE SUM OF THE VARIOUS C33 RECORD INVOICE AMOUNTS, WITH ADJUSTMENTS FOR VARIOUS ALLOWANCES AND CHARGES, AS OUTLINED ON PAGE AII-57, NOTE 2. IF THE TOTAL OF ALL C33 AND RELATED RECORDS, ROUNDED TO TWO DECIMAL PLACES, DOES NOT EXACTLY AGREE WITH THE FIGURE REPORTED IN POS 53-67 OF THE C81 RECORD, THIS ERROR MESSAGE WILL BE GENERATED. GENERALLY, THIS FIGURE WILL MATCH THE "TOTAL INVOICE VALUE" REPORTED IN POS 8-22 OF THE C81 RECORD, BUT WILL ALSO INCLUDE ANY VALUE REPORTED ON THE C84 RECORD, POS 50-64, "PREPAYMENT TOTAL".

38P:	WARNING-EXP DATE>FILER ENT DATE

THE EXPORT DATE WAS FOUND TO BE GREATER THAN REVISED FILER ENTRY DATE.

0LJ:	TEXTILE DATE OF EXPORT INVALID

THIS MESSAGE IS GENERATED DURING ENTRY SUMMARY PROCESSING (EI) AND WILL REJECT ON THE 51 RECORD. THE DATE OF EXPORTATION (TEXTILE) REPRESENTS THE DATE THE TEXTILE GOODS WERE EXPORTED FROM THE COUNTRY OF ORIGIN. IF THE COUNTRIES OF ORIGIN AND EXPORT ARE THE SAME, THE DATE OF EXPORTATION IN THE 50 RECORD AND THIS DATE IN THE 51 RECORD MUST BE IDENTICAL. IF THE COUNTRIES OF ORIGIN DIFFER, THIS DATE CAN BE EARLIER THAN OR EQUAL TO THE DATE OF EXPORTATION ON THE 50 RECORD. SEE CATAIR PAGE ENS-53. THIS MESSAGE WILL ALSO BE GENERATED IF A TEXTILE EXPORT DATE IS REPORTED WHEN NONE IS REQUIRED (NON-TEXTILE CATEGORY CLASSIFICATION)

ADG:	INVALID OGA CODE

THIS MESSAGE OCCURS WHEN A FILER SENDS ANYTHING OTHER THAN A SPACE IN POSITION 76 OF THE ENTRY SUMMARY A10 RECORD. THIS DATA ELEMENT IS DEFINED AS OTHER GOVERNMENT AGENCY (OGA) CODE' AND IS DESCRIBED AS " FOR FUTURE USE. SPACE FILL".

VAM:	FILER MUST PAY BY ACH FOR QTA ENT

IF THE FILER OF THE ENTRY IS NOT ACH OPERATIONAL AS OF THE DATE AND TIME OF THE TRANSMISSION OF THE ENTRY SUMMARY, ENTRY TYPE 02 CANNOT BE TRANSMITTED WITH A PAYMENT TYPE AND PAYMENT DUE DATE IN THE 30 REC (POS 53-59). THE ACH STATUS OF THE FILER WILL BE VERIFIED FROM THE FILER PROFILE RECORD IF THE FILER SENDS A LIVE ENTRY INDICATOR OF "1" IN POS 44 OF THE 10 RECORD. FURTHER, THE PRESENCE OF THE LIVE ENTRY INDICATOR WILL TRIGGER A SEARCH OF THE ACH UNIT PAYOR CROSS-REFERENCE FILE TO VERIFY THAT THE FILER, OR IMPORTER, HAS A VALID PAYER UNIT NUMBER RECORD. IF ANY OF THE HEADER DATA IS MISSING, THIS ERROR MESSAGE WILL RESULT.

824:	ULT CONS ON REGION SANCTION

THIS ENTRY SHOULD BE REJECTED TO THE FILER. A DUTY PAID 'LIVE' ENTRY IS REQUIRED. REFER FILER TO ASSIGNED ENTRY SPECIALIST TEAM IN THE PORT OF ENTRY.

VN7:	LICENSE DDPP INVALID

IN THE DRAWBACK MODULE, THIS MESSAGE MEANS THAT THE FILER GAVE ACS A DDPP AS THE LICENSE PORT THAT DOES NOT EXIST IN ACS.

AQQ:	BASE DATE QUALIFIER INVALID

WHEN A FILING/AMENDMENT PERIOD BASE DATE IS SUBMITTED, FILER MUST DECLARE THE LIFECYCLE EVENT ASSOCIATED TO THE DATE. VALID VALUES ARE: 1 - DATE OF NOTIFICATION OF CUSTOMS DECISION ADVERSE TO PROTESTANT 2 - DATE OF NOTIFICAITON OF ADVERSE COUNTRY MARKING DECISION UNDER NAFTA 3 - DATE OF EXACTION 4 - DATE OF NOTIFICATION OF DEMAND FOR PAYMENT AGAINST A BOND IN THE CASE OF A SURETY

LU2:	INVALID LUMBER PERMIT TYPE

THE SOFTWOOD LUMBER PERMIT TYPE IS TRANSMITTED IN THE 40 REC, POS 70-72. IT IS MANDATORY FOR MERCHANDISE ENTERED UNDER ONE OF THE FOLLOWING TARIFF NUMBER SUBHEADINGS OF 44071000, 44091020, OR 44091090 WITH PROVINCE OF ORIGIN CODES: XA, XC, XO, OR XQ. POS 70 OF THE 40 REC MUST CONTAIN EITHER "A", "B", "C", OR "D." IF POS 70 CONTAINS "A", "B", OR "C", THEN POS 71-72 MUST CONTAIN ZEROES OR SPACES. IF POS 70 CONTAINS "D", THEN POS 71-72 MUST CONTAIN A TWO-CHARACTER NUMERIC CODE THAT FALLS WITHIN THE RANGE OF 01 THROUGH 20, DEPENDING ON THE CALENDAR QUARTER DURING WHICH THE PERMIT IS ISSUED. SEE ADMIN MESSAGE 97-0579 FOR MORE INFORMATION ON LUMBER PERMITS.

INC:	DATA CONTAINED IN SPACE FILL

TO BE USED WHEN FIELDS THAT ARE DESIGNATED 'SPACE FILL ONLY' HAVE DATA ENTERED.

 Next 10 >>Showing results 1 to 25 of 1405