ABI Error Message

29E:	"B" RECORD MISSING OR INVALID

THIS MESSAGE INDICATES THAT THE "B" RECORD IS MISSING IN AN A-Z BATCH. IN MOST CASES, THE ERROR MESSAGE NUMBER IS NOT DISPLAYED IN THE ABI OUTPUT WHEN THIS ERROR OCCURS.

VLQ:	DRAWBACK EXPORT SUMM IND INVALID

THIS MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' (YES) OR 'N' (NO) FOR WHETHER THIS IS AN EXPORT SUMMARY CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR A SPACE (NO) OR '1' (YES) FOR ABI. APPLIES TO DRAWBACK MODULE.

VKR:	HLN:MAX 5 OVERRIDE FLDS EXCEEDED

A MAXIMUM OF FIVE FIELDS MAY BE SELECTED FOR FORMULATE OVERRIDE SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

VGI:	FD 701: FDA SHPPR NOT ON FILE

THIS ERROR MESSAGE IS A REJECTION IN THE FDA INTERFACE. THE FDA SHIPPER IDENTIFICATION NUMBER (MID, REC FD01, POS 63-77) MUST BE ON FILE FOR THE SHIPPER BEFORE THE FDA ENTRY WILL PROCESS. THE FILER MUST ADD THE SHIPPER IDENTIFICATION NUMBER TO THE DATABASE VIA ABI AND RESEND THE ENTRY.

VDR:	FTZ ENTRY REQUIRES FIRMS CODE

THE FIRMS CODE (REC 20, POS 72-75) IS MANDATORY FOR ENTRY TYPE 06 (EI APPLICATION) OR REC H2, POS 3-6 IN THE HI APPLICATION.

EJV:	INBOX IND MUST BE 'R' OR SPACE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C01 REC, POS 56, PROVIDES THE FILER AN OPPORTUNITY TO INDICATE IF THE INVOICE BEING TRANSMITTED IS AN INITIAL INPUT (SPACE FILL THE POSITION) OR IS IN RESPONSE TO AN ABI REJECTION FROM CUSTOMS WHICH REQUESTED THE TRANSMISSION OF THE INSTANT INVOICE. IN THE LATTER CASE, THE ACCEPTABLE VALUE FOR THIS FIELD IS "R". ANY OTHER CHARACTER TRANSMITTED IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

VO1:	DT HS7: FORM REQUIRED

IMPORTED PRODUCTS SUBJECT TO REVIEW BY THE DEPARTMENT OF TRANSPORTATION ARE CODED DT1 OR DT2 ON THE HARMONIZED TARIFF DATABASE. IF THE CODING IS DT2, THE FILER IS REQUIRED TO REPORT DOT INFORMATION FOR THE TARIFF NUMBER. IF NO DATA IS TRANSMITTED, THE ABOVE ERROR MESSAGE WILL RESULT.

DKD:	D12 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE COULD BE THE RESULT OF A DRAWBACK DISKETTE OR ABI DRAWBACK PROBLEM. IT IS SAYING THAT WHEN CUSTOMS FORMATTED THE RECORDS FROM THE DRAWBACK DISKETTE OR WHEN THE DATA WAS SENT VIA ABI, NO DATA WAS PRESENT IN THE GIVEN RECORD. IF THE DISKETTE HAS NO DATA, THE PC PROGRAM SHOULD STOP IT BEFORE TRANSMISSION; HOWEVER, THERE MAY HAVE BEEN DATA THERE, BUT IT WAS BAD DATA.

BL2:	UNLAD DP CANNOT EQUAL ENTRY DP

IF AN IN-BOND NUMBER (EITHER CONVENTIONAL OR "V" NUMBER) IS SENT IN POSITIONS 3-14 OF THE 22 RECORD (EI) OR POSITIONS 3-14 OF THE HA RECORD (HI) THEN THE DISTRICT PORT OF UNLADING (POSITIONS 30-33 OF THE EI 20 RECORD OR POSITIONS 65-68 OF THE HI H1 RECORD) CANNOT BE THE SAME AS THE ENTRY DISTRICT PORT.

4NF:	NAME/ADDRESS RECORD NOT FOUND

THIS ERROR MESSAGE OCCURS IN THE 'KN' IMPORTER ADDRESS QUERY WHEN A FILER SENDS A NAME AND ADDRESS THAT IS NOT IN THE IMPORTER FILE. A COMMON MISTAKE IS A MISSPELLING OF THE CITY NAME (E.G. LAS VEGASAS).

07I:	VESSEL CODE & NAME SUBMITTED

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). ABI WILL ACCEPT THE VESSEL NAME, BUT NOT THE VESSEL CODE. IF BOTH ARE TRANSMITTED, THIS ERROR MESSAGE WILL BE ISSUED. (NOTE - 5-CHARACTER VESSEL CODES ARE NO LONGER USED).

RBU:	RECON FILER NOT ON FILE

THIS MESSAGE MEANS THAT THE FILER CODE GIVEN ON THE RECONCILIATION DOES NOT EXIST IN ACS.

VM4:	HLN: FIELD OR STRING MUST BE Y

EITHER THE FIELD SELECT OR STRING SELECT MUST BE Y=YES. AT LEAST ONE IS REQUIRED. BOTH CAN BE Y=YES, BUT BOTH CAN NOT BE N=NO.

840:	WARNING-GTB MUST HAVE 'P' RIDER

THIS IS ONLY A WARNING MESSAGE. THE GENERAL TERM BOND (TYPE 5) MUST HAVE A 'P' RIDER FOR DRAWBACK ENTRIES. THIS DOES NOT CAUSE THE ENTRY TO GO IN A REJECTED STATUS.

EJB:	UNITS OF MEASURE MUST BE EQUAL

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD, POS 19-21, IS USED TO REPORT THE UNIT OF MEASURE OF THE QUANTITY REPORTED IN POS 4-18.THIS UNIT OF MEASURE MUST BE IDENTICAL TO THE UNIT OF MEASURE REPORTED IN THE C33 RECORD, POS19-21. IF THE UNITS ARE NOT IDENTICAL, THIS ERROR MESSAGE WILL RESULT.

VIC:	DT HS7: BLANK VIN POSITION: 1

THIS MESSAGE IS GENERATED WHEN AN ENTRY SUMMARY TRANSACTION IS USED TO REPORT DOT DATA VIA ABI. IF THE FILER USES THE DT03 TO REPORT VEHICLE IDENTIFICATION NUMBERS (VIN), THE FIRST VIN REPORTED MUST BE TRANSMITTED IN POSITIONS 5-21 OF THIS RECORD. IF THIS FIELD IS OMITTED AND THE FIRST VIN IS REPORTED IN POSITIONS 22-38, THIS ERROR MESSAGE WILL BE GENERATED.

VEY:	FD 701: DUP AFFIRM/COMPLIANCE

MORE THAN ONE FDA AFFIRMATION OF COMPLIANCE (AND QUALIFIER IF APPLICABLE) CAN BE SENT FOR AN FDA LINE FOR A SINGLE FDA PRODUCT CODE. THE FIRST AFFIRMATION IS SENT IN REC FD01, POS 20-22. IF MORE THAN ONE AFFIRMATION (AND QUALIFIER, IF APPLICABLE) APPLIES THEY ARE SENT IN SEPARATE FD05 RECORDS, POS 5-7. THIS ERROR MESSAGE WILL RESULT IF A DUPLICATE AFFIRMATION CODE IS SENT IN AN FD05 RECORD THAT MATCHES WHAT WAS SENT IN THE FD01 RECORD.

VLF:	GREATER THAN 9,999 ITEMS SENT

THE TOTAL OF ALL IMPORT ENTRY AND CM RECORDS IN A DRAWBACK TRANSACTION CANNOT EXCEED THE MAXIMUM OF 9,999. THAT NUMBER IS THE MAXIMUM ACS CAN HANDLE. FOR RECONCILAITION, THIS MEANS THAT MORE THAN 9,999 IMPORT ENTRY ASSOCIATION RECORDS WERE TRANSMITTED.

LU2:	INVALID LUMBER PERMIT TYPE

THE SOFTWOOD LUMBER PERMIT TYPE IS TRANSMITTED IN THE 40 REC, POS 70-72. IT IS MANDATORY FOR MERCHANDISE ENTERED UNDER ONE OF THE FOLLOWING TARIFF NUMBER SUBHEADINGS OF 44071000, 44091020, OR 44091090 WITH PROVINCE OF ORIGIN CODES: XA, XC, XO, OR XQ. POS 70 OF THE 40 REC MUST CONTAIN EITHER "A", "B", "C", OR "D." IF POS 70 CONTAINS "A", "B", OR "C", THEN POS 71-72 MUST CONTAIN ZEROES OR SPACES. IF POS 70 CONTAINS "D", THEN POS 71-72 MUST CONTAIN A TWO-CHARACTER NUMERIC CODE THAT FALLS WITHIN THE RANGE OF 01 THROUGH 20, DEPENDING ON THE CALENDAR QUARTER DURING WHICH THE PERMIT IS ISSUED. SEE ADMIN MESSAGE 97-0579 FOR MORE INFORMATION ON LUMBER PERMITS.

95P:	DUTY COMP DTE > 60 DAYS IN FUTURE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). IF THE FILER TRANSMITS A PAYMENT DUE DATE MORE THAN 60 DAYS IN THE FUTURE AND THE PAY DUE DATE IS USED TO ESTABLISH THE DUTY COMPUTATION DATE (SEE THE COMP DATE HIERARCHY ON PAGE ENS-28 OF THE CATAIR), THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL ALSO OCCUR IF A FILER RETRANSMITS AN ENTRY WITH A VALID PAYMENT DUE DATE, BUT THE ENAI RECORD HAS ERRONEOUSLY BEEN POSTED WITH AN "ENTRY DATE" THAT WAS ONE YEAR LATER THAN THE ACTUAL ENTRY DATE. ABI COMPARED THE RETRANSMITTED PAY DUE DATE AND FOUND THAT THE ENTRY DATE WAS MORE THAN 60 DAYS IN THE FUTURE, WHEN COMPARED TO THE FILER'S PAYMENT DUE DATE.

VOW:	NON-REMOTE ENTRY ALREADY ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSMISSION. IF A FILER HAS ALREADY ESTABLISHED SELECTIVITY RECORDS IN ACS, VIA THE HI (CARGO RELEASE DATA INPUT) TRANSACTION, THE FILER MAY NOT TRANSMIT AN RLF SUMMARY FILE FOR THE SAME ENTRY NUMBER. IF THE FILER WISHES TO CREATE AN RLF ENTRY FOR THE NUMBER IN QUESTION, THE ORIGINAL SELECTIVITY RECORDS FROM THE HI TRANSACTION WILL HAVE TO BE REMOVED BY PORT PERSONNEL.

002:	INVALID UNIT OF MEASURE

UNIT OF MEASURE INPUT IS NOT AN ACCEPTED ALPHA-NUMERIC CODE, OR IS FORMATTED INCORRECTLY. FOR AUTOMATED INVOICE INPUT PURPOSES, THE ABOVE MESSAGE RELATES TO DATA TRANSMITTED IN THE C33 REC, POS 19-21 OR 61-63. VALID UNITS OF MEASURE (AS LISTED IN APPENDIX C OF THE CATAIR) SHOULD BE REPORTED IN THESE TWO FIELDS; HOWEVER, ANY REASONABLE ABBREVIATION WILL BE ACCEPTED IN THE CI APPLICATION (I.E. "DOZ" OR "DZ" FOR DOZEN, ETC.) IF POS 19-21 OR 61-63 ARE BLANK, AND A QUANTITY IS TRANSMITTED IN POS 4-18, THIS ERROR MESSAGE WILL BE GENERATED.

VPE:	WHSE TYPE/CLAIM TYPE CONFLICT

THIS REJECT OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF THE CLAIM TYPE INDICATOR IN THE D01 RECORD, POSITION 4 EQUALS '1', THEN THE WAREHOUSE ENTRY PROCESS TYPE IN THE D10 RECORD, POSITION 46 MUST BE EITHER A '1' OR '2'.

BRH:	OTHER RECON ALREADY ON FILE

FILER HAS ATTEMPTED TO FILE A RECON AGAINST AN IMPORT ENTRY FOR AN 'OTHER' ISSUE AND A RECON IS ALREADY ON FILE AGAINST THAT IMPORT ENTRY FOR 'OTHER' ISSUE. NOTE: IF THIS ERROR IS GENERATED IN ADDITION TO ERROR RBL, 'RECON EXISTS- REPLACE OR DELETE', CORRECTING THAT ERROR WILL USUALLY REMOVE ERROR BRH AT THE SAME TIME.

VLJ:	DUP MFGR # ENCOUNTERED/CERT MFGR

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER HAS GIVEN US THE SAME CM NUMBER (CERT MFGR #) MORE THAN ONCE ON THE CLAIM. JUST AS WITH IMPORT ENTRIES CLAIMED ON THE DISKETTE OR VIA ABI, THE CM NUMBER SHOULD ONLY APPEAR ONCE WITH THE TOTAL DRAWBACK CLAIMED FOR THAT CM.

 Next 10 >>Showing results 1 to 25 of 1405