ABI Error Message

JAF:	NO DATA FOUND FOR KEY

THIS MESSAGE IS A REPLY TO ONE OR MORE ABI QUERIES THAT INDICATES THAT ABI COULD FIND NO RECORDS MATCHING THE FILER'S REQUEST. IT IS USED, AT A MINIMUM, AS A REPLY TO THE FDA PRODUCT CODE QUERY WHEN THE PRODUCT CODE TRANSMITTED BY THE FILER IS NOT FOUND ON THE FDPL DATABASE

JEA:	ENTRY SUMMARY MUST BE ABI

NON-ABI SUMMARY WAS INPUT AGAINST AN ABI SELECTIVITY RECORD.

J12:	I.T. MASTER BILL NOT COMPLETE

THIS MESSAGE APPLIES TO THE CARGO RELEASE INPUT TRANSACTION, APPLICATION H IF THE FILER REPORTS AN AIR WAYBILL AS THE I.T. NUMBER, THE NUMBER MUST CONTAIN 11 DIGITS (3 FOR THE CARRIERS PREFIX AND 8 FOR THE MASTER BILL NUMBER). IF ANY OF THE DIGITS ARE OMITTED, THIS MESSAGE WILL RESULT. NOTE: IF DIGITS ARE OMITTED FROM AN OCEAN MASTER IN BOND NUMBER, ERROR MESSAGE 4A3, INVALID IN-BOND NUMBER, WILL BE GENERATED.

361:	IT CHECK DIGIT ERROR

THIS ERROR MESSAGE WILL RESULT IF AN AIR WAYBILL NUMBER OR A CONVENTIONAL INBOND NUMBER (9 NUMERIC) IS TRANSMITTED WITH AN INCORRECT CHECK DIGIT. IT IS THE RESPONSIBILITY OF THE TRANSMITTING FILER TO CONFIRM WHETHER THE ERROR IS IN THE CHECK DIGIT ITSELF OR IN ONE OF THE PRECEDING DIGITS. NOTE: IF THE CHECK DIGIT ERROR OCCURS ON A PAPERLESS MASTER INBOND NUMBER (THOSE STARTING WITH "V"), ERROR MESSAGE 2CI WILL BE GENERATED. THE AMS SYSTEM WILL ACCEPT A TRANSMISSION WITH AN INCORRECT CHECK DIGIT. CHECK AMS FOR THE BILL OF LADING OR IN-BOND NUMBER. IF IT IS IN AMS, YOUR ABI CLIENT REPRESENTATIVE CAN RUN THE NUMBER THROUGH THE CHECK DIGIT CALCULATOR. IF AMS HAS THE INCORRECT CHECK DIGIT, ADVISE THE AMS CARRIER TO CORRECT AND RE-TRANSMIT WITH THE PROPER CHECK DIGIT.

064:	DUTY AMOUNT MUST EQUAL ZEROS

IF CLASS CODE = 020 OR 021 ANOTHER CLASS CODE, (001 OR 002) MUST BE PRESENT. WHEN THIS IS THE CASE THE DETAIL AMOUNT FOR 001 OR 002 MUST BE BLANK OR ZERO. IN AN ABI SUMMARY TRANSACTION, IF A SPECIAL PROGRAM THAT YIELDS ZERO DUTY IS USED, THE 50 RECORD MUST SHOW ZERO IN POS 14-23.

VKM:	HLT: SUBS. ORDER MUST BE O/D/N

THE SUBSEQUENT SORT ORDER SWITCH MUST BE O=OVERRIDE, D=DEFAULT OR N=NONE.

JEB:	CHECK FOR STAT COPY

ABI SELECTIVITY RECORD WAS FOUND FOR ON-LINE ENTRY SUMMARY .

VDO:	-->ENTRY SUMMARY LINE *--*

THIS MESSAGE IS ALWAYS ACCOMPANIED BY ANOTHER MESSAGE THAT INDICATES WHY THE CARGO CERTIFICATION WAS UNABLE TO BE PROCESSED. THE "*--*" IN THE MESSAGE TITLE WILL BE REPLACED WITH "LINE NNNN" IN THE ACTUAL SUMMARY OUTPUT MESSAGE. THE MOST COMMON SITUATIONS THAT WILL GENERATE THIS MESSAGE ARE THOSE ENTRIES INVOLVING OTHER GOVERNMENT AGENCY REGULATED TARIFF NUMBERS, SUCH AS FWS OR FDA. THIS MESSAGE WILL ALERT THE FILER TO WHICH ENTRY SUMMARY LINE NEEDS THE OGA DATA. THIS MESSAGE WILL ALSO BE GENERATED IF ONE OR MORE SUMMARY LINES HAVE AN MID THAT DOES NOT HAVE A COMPLETE NAME AND ADDRESS ON FILE IN THE MID DATABASE.

B15:	INSUFFICIENT DATA IN FIRM OR CITY

INPUT FIRM NAME OR CITY NAME FIELD DOES NOT CONTAIN ENOUGH CHARACTERS TO CREATE A MANUFACTURER ID. IN ABI, THIS MESSAGE CAN OCCUR IF THE FILER TRANSMITS LOWER CASE LETTERS IN THE FIRM NAME OR CITY NAME FIELD, BUT THE FIRST LETTER OF THE FIRM NAME AND CITY NAME IS A CAPITAL LETTER.

VP3:	CANADIAN DISCLAIMR/ENTRY CONFLICT

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE NAFTA COUNTRY ENTRY LIST DISCLAIMER IS SENT IN THE D30 RECORD, POSITION 68. SPACE FILL = ASSOCIATED NAFTA COUNTRY ENTRY DATA WILL BE PROVIDED, '1' = ASSOCIATED NAFTA COUNTRY ENTRY DATA WILL NOT BE PROVIDED. THIS MESSAGE WILL BE GENERATED IF POSITION 68 CONTAINS A '1' AND THE ENTRY CONTAINS A D20 RECORD WITH NAFTA COUNTRY ENTRY DATA.

Q06:	STATEMENT NOT ON FILE

EITHER THE STATEMENT NUMBER GIVEN IN POSITIONS 15 THROUGH 24 OF THE QT RECORD CANNOT BE FOUND ON THE DSA FILE OR THE STATEMENT NUMBER WAS NOT RIGHT JUSTIFIED WITH A ZERO IN POSITION 14. WHEN CUSTOMS BILLS ARE AVAILABLE FOR PAYMENT THROUGH ACH, POSITION 14 WILL BE CHANGED TO ACCEPT OTHER NUMBERS. THE MOST COMMON REASON FOR THIS MESSAGE IS THAT ALL ENTRIES ORIGINALLY LISTED ON THE STATEMENT HAVE BEEN DELETED, EITHER BY THE FILER OR BY CUSTOMS. ONCE ALL ENTRIES ARE REMOVED FROM THE STATEMENT, THE STATEMENT NUMBER DROPS OUT OF THE SYSTEM AND CANNOT BE USED IN AN ACH PAYMENT TRANSACTION.

532:	SEQUENCE ERROR-LINE ITEM RECORD

MESSAGE TO ABI USER IF A REQUIRED LINE ITEM RECORD IS MISSING OR OUT OF SEQUENCE.

DKZ:	TARIFF NOT ONFILE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THE MESSAGE SIMPLY MEANS THAT THE NUMBER, AT THE 6, 8, OR 10 DIGIT LEVEL DOES NOT EXIST ON THE TARIFF FILE. NORMALLY, THIS OCCURS WHEN THE FILER HAS GIVEN 10 DIGITS ON OLDER RECORDS. FOR OLDER RECORDS, IF THE FILER USES 6 DIGITS (OR 8 IF PETROLEUM) THE PROBLEM IS MINIMIZED.

EI4:	INVALID ALLOWANCE CHARGE AMOUNT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C17 AND C18 RECORDS PROVIDE FOR THE REPORTING OF HEADER LEVEL CHARGES/ALLOWANCES. (THE C51/C53 RECORDS REPORT THESE ELEMENTS AT THE LINE LEVEL, BUT THIS MESSAGE ALSO APPLIES TO THOSE RECORDS). THE DOLLAR AMOUNT IN POS 4-18 OF THE C18 RECORD MUST VARY BY NO MORE THAN ONE CENT, PLUS OR MINUS, WHEN COMPARED TO THE DOLLAR AMOUNT PRODUCED FROM THE APPROPRIATE CALCULATION THAT OCCURS AS A RESULT OF THE COMBINATION OF ELEMENTS TRANSMITTED ON THE C17 RECORD. THE COMBINATION OF ELEMENTS IN THE C17 RECORD THAT ARE USED IN THE CALCULATION IS: - RATE/PER UNIT X UNIT PRICE BASIS /NBR OF PRICING UNITS (FROM ALL THE PRECEDING C33 RECORDS.) (IF C51/53 RECORDS ARE USED, ONLY THE C33 RECORD IMMEDIATELY PRECEDING THE C51/53 RECORDS IS USED TO DETERMINE THE NUMBER OF PRICING UNITS).

VGT:	FD 701: UOM NOT ALLOWED W/O QTY

IN THE FDA INTERFACE A UOM (UNIT OF MEASURE), REC FD02, POS 15-18, 29-32, 43-46I, 57-60, 71-74 AND REC FD04, POS 15-18 IS NOT ACCEPTED UNLESS IT IS TRANSMITTED WITH A QUANTITY. THE REVERSE IS ALSO TRUE, A QUANTITY IS NOT ALLOWED WITHOUT A UNIT OF MEASURE.

8XS:	EXTENSION INVALID AFTER CLOSE DT

THIS MESSAGE IS GENERATED IN RESPONSE TO A TIB EXTENSION REQUEST (APPLICATION XN). IF THE TRANSMISSION IS MADE AT A DATE THAT WOULD CAUSE THE EXTENSION TO EXCEED THE DATE ALREADY SHOWN ON ENA AS THE TIB CLOSE DATE, THIS MESSAGE WILL GENERATE. EXTENSIONS OF TIBS ARE GRANTED FOR ONE YEAR PERIODS, SO THE REQUEST MUST BE MADE PRIOR TO ONE YEAR FROM THE PROPOSED TIB CLOSE DATE IN ORDER TO BE VALID.

ADS:	RLSE ON FILE-CONSL NOT ALLOWED

AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI) CANNOT USE AN ENTRY NUMBER THAT WAS PREVIOUSLY USED IN A RELEASE TRANSACTION. IF EITHER THE SELECTIVITY FILE OR THE ENTRY HEADER FILE SHOWS A RELEASE ON THE ENTRY NUMBER IN QUESTION, THAT NUMBER CANNOT BE USED IN THE SUMMARY INPUT, 10 REC, POS 59-70. THIS MESSAGE WILL BE GENERATED IF THE ENTRY NUMBER HAS ALREADY BEEN USED FOR A RELEASE TRANSACTION.

VMB:	HLO: SORT SEQUENCE NUMBER INVALID

SORT SEQUENCE NUMBERS MUST BE UNIQUE ASCENDING VALUES STARTING FROM 01 AND ENDING WITH THE NUMBER OF SORT FIELDS.

1GL:	MAIL FEE REQUIRED

FOR DUTIABLE MAIL ENTRIES (MOT 50), A 34 RECORD WITH CLASS CODE 496 AND AN AMOUNT OF $5.00 MUST BE TRANSMITTED ON THE SUMMARY INPUT. IF THE 34 RECORD IS OMITTED, THIS ERROR MESSAGE WILL RESULT.

VLF:	GREATER THAN 9,999 ITEMS SENT

THE TOTAL OF ALL IMPORT ENTRY AND CM RECORDS IN A DRAWBACK TRANSACTION CANNOT EXCEED THE MAXIMUM OF 9,999. THAT NUMBER IS THE MAXIMUM ACS CAN HANDLE. FOR RECONCILAITION, THIS MEANS THAT MORE THAN 9,999 IMPORT ENTRY ASSOCIATION RECORDS WERE TRANSMITTED.

LI7:	LIQ RESULTS IN RFND TO BE ISSUED

RELIQUIDATION RESULTS IN REFUND BEING ISSUED. PRESS PF8 TO COMPLETE.

8VQ:	FATAL DATABASE ERROR

THIS MESSAGE IS SIMILIAR TO '999' "DB ERROR HAS OCCURRED". THERE IS AN INTERNAL ACS PROBLEM WITH THE PROGRAM. DRAWBACK DISKS WILL ONLY BE REJECTED FOR THIS ERROR AFTER USCS HAS RESEARCHED THE PROBLEM TO DETERMINE IF IT IS DISK RELATED. ABI WILL REJECT THE DATA TRANSMISSION.

VKE:	HLT:DBID REQUIRED

DBID IS REQUIRED TO CREATE A TABLE/LOCATE INQUIRY DEFINITION.

94R:	DIST/PORT ERROR LOC, QUAL 22 SEG

EDIFACT ERROR. THE PROCESSING DISTRICT/PORT CODE IS INVALID (TRANSLATED TO THE 'B' RECORD FOR ABI).

VGQ:	FD 701: ESTBLSMNT ID NOT ON FILE

AN FDA ESTABLISHMENT IDENTIFIER (FEI) NUMBER IS A TWELVE-DIGIT NUMBER THAT IDENTIFIES A DOMESTIC LOCATION (ADDRESS) OF AN FDA IMPORTER OR DOMESTIC CLIENT. THESE NUMBERS ARE CREATED IN THE FDA INTERFACE BY FILERS REQUESTING, THROUGH ABI TO FDA, A NUMBER FOR A DOMESTIC LOCATION. THE REQUEST IS MOST OFTEN MADE WHEN THE FILER HAS SENT A FOREIGN-BASED CONSIGNEE AND HAS RECEIVED AN FDA REJECT. THE FEI NUMBER, IF USED, IS SENT IN REC FD03, POS 15-26 AND MUST CONTAIN 12 NUMERIC CHARACTERS. THE MOST COMMON MISTAKE IS TO OMIT THE FIRST TWO ZEROS AND TRANSMIT ONLY TEN NUMBERS.

 Next 10 >>Showing results 1 to 25 of 1405