ABI Error Message

8WG:	NO UPDATE ACTION REQUESTED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSMISSION (APPLICATION LN). GENERALLY, THIS MESSAGE INDICATES THAT THE FILER HAS TRANSMITTED ONLY AN L1 RECORD WITH NO DATA ELEMENTS THAT WARRANT A CHANGE TO THE EXISTING DATA ELEMENTS ON THE PREVIOUSLY TRANSMITTED SELECTIVITY RECORD. THIS COULD BE THAT EITHER THE L1 RECORD WAS SENT WITH ONLY THE ENTRY NUMBER, OR WITH DATA ELEMENTS THAT ARE IDENTICAL TO THOSE FROM THE ORIGINAL INPUT (SAME CARRIER CODE, VOYAGE NUMBER, ETC).

VK3:	HLS: CONSTANT VALUE REQUIRED

A CONSTANT VALUE OPERAND IS REQUIRED WITH OPERAND TYPE 'C'. THE CONSTANT MAY BE A DISPLAY LITERAL IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X '....'

95G:	INVALID NAFTA RECON INDICATOR

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). IF THE IMPORTER DESIRES THE INSTANT IMPORT ENTRY TO BE FLAGGED FOR A NAFTA RECONCILIATION, THE APPROPRIATE ABI INDICATOR IS A "1" IN POS 76 OF THE 20 RECORD. IF ANY OTHER CHARACTER IS TRANSMITTED IN THIS POSITION (EXCEPT A BLANK TO INDICATE NO NAFTA RECONCILIATION IS BEING ELECTED), THIS ERROR MESSAGE WILL BE GENERATED.

VPJ:	CANADIAN TARIFF NBR INVALID

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE NAFTA CTRY TARIFF NUMBER IS SENT IN POSITIONS 24-33 OF THE D20 RECORD AND MUST BE A VALID NUMBER.

AAY:	WARNING - CASES NOT RELATED

THIS MESSAGE IS GENERATED AS A RESULT OF AN ENTRY SUMMARY TRANSACTION. IF THE FILER REPORTS BOTH ANTI-DUMPING AND COUNTERVAILING DUTY CASE NUMBER IN THE 60 RECORD, THESE MUST BE RELATED. IF EITHER CASE DOES NOT POINT TO THE OTHER CASE, THIS MESSAGE WILL RESULT.

VLL:	TOT CERT MFGR COUNT INVALID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE SUM OF ALL THE DISKETTE 'IT' IMPORT TRAILER, 'CN' CONTRACT TRAILER, 'CM' IMPORT TRAILER, OR 'CI' CANADIAN IMPORT TRAILER RECORDS OR ABI 'D12', 'D30', 'D40', OR 'D50' RECORDS DOES NOT ADD UP TO WHAT THE COUNT IS IN THE 'CT CLAIM TRAILER' RECORD, OR ABI 'D90' RECORD. BECAUSE IT DOES NOT ADD UP ABI CANNOT KNOW WHETHER THE TOTAL COUNT IS SIMPLY WRONG, OR THE TOTAL COUNT IS RIGHT AND THERE ARE MISSING RECORDS.

VNP:	D11 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE COULD BE THE RESULT OF A DRAWBACK DISKETTE OR ABI PROBLEM. WHEN CUSTOMS FORMATTED THE RECORDS FROM THE DISKETTE OR WHEN THE DATA WAS SENT VIA ABI, NO DATA WAS PRESENT IN THE GIVEN RECORD. IF THE DISKETTE HAS NO DATA, THE PC PROGRAM SHOULD STOP IT BEFORE TRANSMISSION; HOWEVER, THERE MAY HAVE BEEN DATA THERE, BUT IT WAS BAD DATA.

B14:	PROVINCE CODE REQUIRED

1.IF THE COUNTRY OF ORIGIN (REC 40, POS 6-7) AND THE COUNTRY OF EXPORT (REC 50, POS 69-70) IS CANADA, THE CANADIAN PROVINCE CODE MUST BE USED AS THE ISO CODE FOR THE COUNTRY OF ORIGIN. 2. IF THE COUNTRY OF ORIGIN (REC 40, POS 6-7) IS EITHER CA OR THE CANADIAN PROVINCE CODE, THE ISO CODE OF THE MANUFACTURER ID (REC 60, POS 43-44) MUST BE THE CANADIAN PROVINCE CODE.

52A:	SPI DATA INCONSISTANT

THE SPI DATES ARE PRESENT BUT THE SPI INDICATOR IS OFF

BL2:	UNLAD DP CANNOT EQUAL ENTRY DP

IF AN IN-BOND NUMBER (EITHER CONVENTIONAL OR "V" NUMBER) IS SENT IN POSITIONS 3-14 OF THE 22 RECORD (EI) OR POSITIONS 3-14 OF THE HA RECORD (HI) THEN THE DISTRICT PORT OF UNLADING (POSITIONS 30-33 OF THE EI 20 RECORD OR POSITIONS 65-68 OF THE HI H1 RECORD) CANNOT BE THE SAME AS THE ENTRY DISTRICT PORT.

VE6:	***FDA REJECT INTERNAL ERROR***

THIS ERROR MESSAGE HAPPENS ONLY BETWEEN CUSTOMS ACS AND FDA'S SYSTEM. FDA SENDS INFORMATION VIA CUSTOMS TO THE FILER BY THE "LP" APPLICATION. THERE ARE SEVERAL REASONS WHY THIS ERROR MAY OCCUR. THE MOST COMMON IS WHEN A FOREIGN BASED CONSIGNEE IS TRANSMITTED BY THE FILER (THIS IS AN AUTOMATIC FDA INTER- FACE REJECT) AND EITHER CUSTOMS OR FDA PERFORMS AN ACTION ON THE ENTRY BEFORE THE ENTRY HAS CYCLED THROUGH THE FDA'S SYSTEM. THE 'LP' REJECT ATTACHES TO THE ABDT RECORD BUT DOES NOT GO TO THE FILER. THERE IS CURRENTLY NO SOLUTION TO THIS REJECT.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

VBS:	INV CLARIFICATION CODE FOR BOX

THIS MESSAGE WILL BE GENERATED IF A CLARIFICATION CODE (REC DT01, POS 37) OTHER THAN "V" IS USED FOR HS7 BOX NUMBERS 03, 06, OR 12 (REC DT01, POS 8-9).

VEL:	FC 740:QUANTITY MUST BE > ZERO

IF THE CONDITIONAL FCC FC02 RECORD IS SENT, THE FCC QUANTITY IN POSITIONS 5-16 OF THIS RECORD MUST BE GREATER THAN ZERO.

AQ7:	SAMPLE INDICATOR REQUIRED

THIS DATA FIELD IS MANDATORY FOR THE PJ INITIAL FILING TRANSACTION. THE ACCEPTABLE INDICATORS ARE 'N' (NO SAMPLE) AND 'S' (SAMPLE SENT). THIS DATA FIELD IS CONDITIONAL FOR ANY SUBSEQUENT QJ AMENDMENT OR RJ ADDENDA TRANSACTION. IN A QJ OR RJ THE PROTEST RECORD CAN BE UPDATED TO CHANGE NO SAMPLE TO SAMPLE SENT BY TRANSMITTING 'S'. IF THE PJ OR PREVIOUS QJ OR RJ WAS TRANSMITTED TO UPDATE TO SAMPLE SENT, A SUBSEQUENT QJ OR RJ CANNOT BE USED TO CHANGE THE SAMPLE SENT BACK TO NO SAMPLE. INSTEAD THE FILER MUST CONTACT THE PROTEST PROCESSING TEAM AT THE PORT WHERE THE PROTEST WAS FILED AND REQUEST CUSTOMS MANUALLY UPDATE THE RECORD.

VDL:	MAX LINES ALLOWED IS 999

THE MAXIMUM NUMBER OF CUSTOMS LINES THAT CAN BE SENT ON AN ABI ENTRY SUMMARY IS 999.

VBJ:	FW 3-177: QUANTITY MUST BE > 0

THE FISH AND WILDLIFE QUANTITY (REC FW03, POS 5-16) IS MANDATORY EVEN IF IDENTICAL TO THE QUANTITY ASSOCIATED WITH THE TARIFF NUMBER. THIS FIELD CANNOT BE SPACE FILLED OR ZERO FILLED.

EIF:	SHIPPING/PACKING UNIT ID REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF A C05 RECORD IS TRANSMITTED INDICATING ONE OR MORE SHIPPING UNITS, THEN A C06 RECORD MUST ALSO BE TRANSMITTED FOR EACH OF THE NUMBER OF SHIPPING UNITS LISTED IN THE C05 RECORD. POS 4-20 OF THE C06 RECORD PROVIDES FOR THE IDENTIFICATION NUMBER OF THE SHIPPING UNIT. THIS FIELD CANNOT BE BLANK OR THIS ERROR MESSAGE WILL BE GENERATED.

VMY:	TEAM REVIEW STRATIFIED COMP LINE

THIS ERROR IS GENERATED WHEN THERE IS A LINE LEVEL HIT FOR COMPLIANCE AND THE SUMMARY IS IN CUSTOMS STATUS.

06M:	PROCESSING DIST/PORT NONEXISTENT

PROCESSING DISTRICT/PORT IS NOT IN THE DISTRICT/PORT FILE.

VOT:	REMOTE ENTRY/ELEC INVOICE REQ'D

IF A REMOTE PROCESSING TRANSACTION IS SENT WITH THE REQUISITE 'B' RECORD REMOTE INFORMATION, ELECTRONIC INVOICE INFORMATION MUST BE SENT. THIS INCLUDES AN 'E' IN THE EI 10 RECORD, POSITION 56 AND A 42 INVOICE RECORD THAT CORRESPONDS TO AN ELECTRONIC INVOICE 'CI' OR A 42 INVOICE RECORD WITH A CORRESPONDING 43 RECORD WITH "INVREQ" IN POSITIONS 3-8.

VKY:	HLT;POS REQUIRED W/ OPTIONAL LEN

A POSITION VALUE MUST BE SPECIFIED FOR THE OPTIONAL POSITION/LENGTH PARAMETER WHEN A LENGTH IS SPECIFIED.

2AL:	SURETY CODE INVALID

IF THE FILER TRANSMITS BOND CODE 8 (CONTINUOUS BOND) IN THE SUMMARY INPUT (REC 10, POS 49), THE SURETY CODE IN REC 10, POS 73-75 MUST BE LISTED ON THE BOND DATABASE FILE AND MUST BE IN ACTIVE STATUS. IN ADDITION, THE SURETY CODE CITED IN THE 10 RECORD MUST MATCH THE SURETY CODE IN THE BOND DATABASE FILE FOR THE IMPORTER NUMBER TRANSMITTED IN REC 10, POS 8-19. (THE SURETY CODE FIELD CANNOT BE BLANK, EITHER). IF CASH IS USED IN LIEU OF A BOND, THE BOND TYPE MUST BE A "9" AND SURETY CODE "998" MUST BE USED. IF BOND TYPE "0" IS SENT, AND NO SURETY CODE IS SENT, AS WELL, THIS MESSAGES RESULTS. THIS MESSAGE WILL ALSO APPEAR IF THE IMPORTER HAS TWO ACTIVE CONTINUOUS BONDS IN EFFECT AT THE SAME TIME. THE SURETY CODE FOR THE BOND THAT WENT INTO EFFECT FIRST MUST BE USED ON SUMMARY INPUT TRANSACTIONS. SURETY CODES ARE VALIDATED BASED ON DATE OF RELEASE, SO A SUMMARY TRANSMITTED WITH A SURETY CODE BASED ON ESTIMATED ENTRY DATE WILL ALSO REJECT IF A DIFFERENT SURETY CODE WAS IN EFFECT AT THE TIME OF RELEASE. FOR RECONCILIATION, THE SURETY CODE GIVEN MUST BE VALID ON CUSTOMS FILE.

BRH:	OTHER RECON ALREADY ON FILE

FILER HAS ATTEMPTED TO FILE A RECON AGAINST AN IMPORT ENTRY FOR AN 'OTHER' ISSUE AND A RECON IS ALREADY ON FILE AGAINST THAT IMPORT ENTRY FOR 'OTHER' ISSUE. NOTE: IF THIS ERROR IS GENERATED IN ADDITION TO ERROR RBL, 'RECON EXISTS- REPLACE OR DELETE', CORRECTING THAT ERROR WILL USUALLY REMOVE ERROR BRH AT THE SAME TIME.

2A4:	CARGO RELEASE DATA CERTIFIED

RELEASE DATA CERTIFIED

 Next 10 >>Showing results 1 to 25 of 1405