ABI Error Message

VPQ:	EXPORT DT MUST BE > 12/31/95

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN THE D01 RECORD, POSITIONS 22-27. IN THIS MODULE THE EXPORT DATE MUST BE GREATER THAN DECEMBER 31, 1995.

EIO:	INVALID LOCATION QUALIFIER

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C13 REC, POS 7-8, PROVIDES FOR THE REPORTING OF ONE OF FOUR VALID LOCATION QUALIFIER CODES. THE VALID CODES ARE LISTED ON PAGE AII-23 OF THE CATAIR. THE USE OF ANY OTHER CODE, INCLUDING BLANKS, IN THIS FIELD, WILL GENERATE THIS ERROR MESSAGE. SO REQUIRED TO BE TRANSMITTED IN THE C09-C11 RECORDS. IF THE NAME ELEMENT IN THE C09 REC, POS 4-38, IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

AFV:	PIRP NUMBER CANNOT FOLLOW DESC

IF FILERS USE THE 43 RECORD TO TRANSMIT "INVREQ", NO COMMERCIAL DESCRIPTION DATA IS PERMITTED IN POS 11-80 OF THE 43 REC. ANY DATA IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

DKB:	CONTRACT TRAILER OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE CONTRACT TRAILER SEQUENCE NUMBERS ARE OUT OF SEQUENCE IN THE DRAWBACK MODULE. NOTE: THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. IF ONLY 1 CONTRACT IS USED ON A CLAIM, THAT CONTRACT NUMBER SHOULD APPEAR IN THE CLAIM HEADER RECORD. THE CONTRACT TRAILER RECORD SHOULD NOT BE USED UNLESS THERE ARE MULTIPLE CONTRACTS ON A CLAIM. THE CONTRACT TRAILER COUNTER IS NOT A COUNT OF CONTRACTS, BUT IS A COUNT OF THE CONTRACT TRAILER RECORDS. IF ONLY ONE CONTRACT IS USED,THE COUNTER SHOULD BE 00, SINCE THERE WILL BE NO TRAILER RECORDS. IF 2 CONTRACTS ARE USED THERE WILL BE ONE CONTRACT TRAILER AND THE COUNT WILL BE 01. THREE CONTRACTS WOULD MEAN TWO TRAILERS AND THE COUNT WOULD BE 02, ETC.

VMU:	MOT NOT REQUIRED FOR WHSE WITHDRL

MOT CANNOT BE SUPPLIED FOR ENTRY TYPES 31, 32, 34, AND 38.

VKR:	HLN:MAX 5 OVERRIDE FLDS EXCEEDED

A MAXIMUM OF FIVE FIELDS MAY BE SELECTED FOR FORMULATE OVERRIDE SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

4CU:	VISA # INVALID FOR FASHION SAMPLE

SPI "M" IS USED TO REPORT IMPORTATIONS OF FASHION SAMPLES OR CERTAIN CARPETS FROM CHINA. (SEE ADMIN MSG 97-0482, 97-0952, AND 97-0990). ONE OF THE REQUIREMENTS OF THIS PROGRAM IS THAT IF "M" IS USED, THE VISA NUMBER FOR THE ITEM IN QUESTION MAY NOT BE TRANSMITTED TO ABI. IF THE VISA NUMBER IS SENT, THIS ERROR MESSAGE WILL BE GENERATED.

AEO:	ERROR IN A32 REC; RLSE 2

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. 1F5 RELEASE NOT ON FILE) IN A CONSOLIDATED ENTRY SUMMARY TRANSACTION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE SECOND RELEASE IN THE 32 RECORD.

915:	IT DATE/DATE OF IMP INCONSISTENT

THE DATE TRANSMITTED FOR THE OPENING OF THE IN-TRANSIT (I.T.) ACTION (WHICH MOVES THE FREIGHT FROM THE PORT OF ARRIVAL TO A SECOND U.S. PORT WHERE THE SHIPMENT WILL BE ENTERED) MUST BE ON OR AFTER THE DATE OF IMPORT OF THE FREIGHT INTO THE UNITED STATES. COMPARE THE I.T. DATE FROM THE SUMMARY TRANSMISSION, REC 22, POS 64-69, TO THE IMPORT DATE IN REC 20, POS 34-39.

386:	GSP COUNTRY EXP/ORIG CONFLICT

THE COUNTRY OF ORIGIN (40 RECORD, POS 6-7) AND THE EXPORT COUNTRY (50 REC, POS 69-70) MUST BE THE SAME AND MUST BOTH BE GSP ELIGIBLE TO CLAIM A DUTY EXEMPTION UNDER SPI "A" (REC 50, POS 3). IF THE COUNTRY OF EXPORT IS A MEMBER OF AN ASSOCIATION OF COUNTRIES (ASEAN, FOR EXAMPLE), THE COUNTRY OF EXPORT MAY DIFFER FROM THE COUNTRY OF ORIGIN WITHOUT VIOLATING THE GSP PROVISIONS.

BRQ:	EARLIEST IMPORT DATE MISMATCH

WHEN THE RECONCILIATION SUMMARY ISSUE CODE ON THE 'RA' TRANSACTION 'R10' RECORD = 'NF', THE EARLIEST IMPORT DATE MUST BE GIVEN AND MUST MATCH THE EARLIEST IMPORT DATE IN ACS OF ANY OF THE ASSOCIATED IMPORTS GIVEN IN THE 'R20' RECORDS.

VGL:	FD 701: UOM 1 REQUIRED

THIS ERROR MESSAGE OCCURS WHEN A FILER TRANSMITS A QUANTITY IN POSITIONS 5-14 OF THE FD02 RECORD BUT DOES NOT TRANSMIT A UNIT OF MEASURE IN POSITIONS 15-18 OF THE FD02 RECORD. THIS WOULD ALSO APPLY TO SUBSEQUENT QUANTITIES IN THE FD02 RECORD.

746:	LINE ITEM VALUE MISSING

THIS MESSAGE OCCURS WHEN ZEROES OR SPACES ARE SENT FOR THE VALUE IN POSITIONS 8-17 OF THE 40 RECORD OR POSITIONS 69-78 OF THE 70, 80 OR 81 RECORDS IN A "9802" TRANSMISSION. IN OTHER TYPES OF TRANSMISSIONS, SENDING SPACES OR ZEROES WILL YIELD AN 800 ERROR MESSAGE "NO MATCH FOR ESTIMATED COMP DUTIES" OR IN THE CASE OF GSP OR LDDC, A WARNING MESSAGE 28E "CENSUS OR-LO VALUE/QUANTITY."

4BH:	ENTRY TYPE CHANGE INVALID

THIS MESSAGE INDICATES THAT THE ABI FILER IS ATTEMPTING TO TRANSMIT AN ENTRY SUMMARY WITH A DIFFERENT ENTRY TYPE THAN EXISTS ON THE ENTRY SUMMARY HEADER FILE FOR THE ENTRY NUMBER. IF THE ENTRY IS IN CUSTOMS STATUS, SUCH A CHANGE IS NOT PERMITTED. IF THE ENTRY IS STILL IN ABI STATUS, THIS CHANGE CAN USUALLY BE ACCOMPLISHED. THE MOST COMMON CHANGE IS FROM TYPE 11 TO TYPE 01 (OR VICE VERSA IN SOME CASES). FOR RECONCILIATION ON-LINE PROCESSING, THIS ERROR MEANS THAT YOU CANNOT CHANGE ANY PRE-EXISTING ENTRY THAT IS NOT RECONCILIATION TO A TYPE '09' RECONCILIATION ENTRY SUMMARY.

VBT:	DT HS7: INV CLARIFICATION CODE

ANY CODE OTHER THAN V, T, OR E IN POS 37 OF THE DT01 RECORD WILL BE REJECTED WITH THIS MESSAGE. LEAVING THIS FIELD BLANK WILL ALSO RESULT IN THIS ERROR MESSAGE.

79I:	MANUFACTURER NUMBER NOT ON FILE

THE MANUFACTURER NUMBER USED IN THE ABI SELECTIVITY TRANSACTION DOES NOT EXIST IN THE MANUFACTURER FILE. THIS IS A WARNING MESSAGE ONLY. IT WILL BE FOLLOWED BY THE '42F' "DATA ADDED WITH WARNINGS" MESSAGE.

AR2:	NOTIFY SUB DATA NOT APPLICABLE

NOTIFY SUBSTITUTE TYPE NOT APPLICABLE.

VEJ:	FC 740:TRADE NAME REQ

AN FCC TRADE NAME OF THE PRODUCT IMPORTED MUST BE SENT IN THE FC01 RECORD, POSITIONS 28-57.

VP7:	DIST IN D01 REC NOT = B REC

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE DISTRICT/PORT OF CLAIM IS SENT IN THE D01 RECORD, POSITIONS 7-10. IT MUST MATCH THE PROCESSING DISTRICT/PORT CODE IN THE 'B' RECORD, POSITIONS 4-7.

EJ0:	NEGATIVE AMT IND NOT 'N' OR ' '

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF THE TOTAL AMOUNT OF CHARGES REPORTED IN ALL C17/C18 RECORDS (CODES "S" OR "C" ON THE C17 REC) EXCEED THE TOTAL OF ALL ALLOWANCE REPORTED IN ALL C17/C18 (CODES "A" OR "R" ON THE C17 RECORD), THE NEGATIVE AMOUNT INDICATOR SHOULD BE LEFT BLANK (" ").IF THE REVERSE IS TRUE, THEN THE NEGATIVE AMOUNT INDICATOR MUST BE "N". ANY OTHER CHARACTER IN THIS FIELD (C84 REC, POS 34) WILL RESULT IN THIS ERROR MESSAGE.

95U:	52 REC - SWPM IND FOR CN/HK ONLY

THE SOLID WOOD PACKING INDICATOR ONLY APPLIES TO COUNTRY OF ORIGIN 'CN' (CHINA) OR 'HK' (HONG KONG).

228:	INVALID DAY FOR BEGINNING DATE

DAY OF BEGINNING EFFECTIVE DATE UPDATE IS INVALID

886:	IT QUANTITY MUST BE NUMERIC

THIS ERROR MESSAGE OCCURS IN THE ABI 'HI' CARGO SELECTIVITY TRANSACTION WHEN AN I.T. IS SENT IN POSITIONS 3-14 OF THE HA RECORD AND THE I.T. QUANTITY IN POSITIONS 51-58 ARE NOT ALL NUMERICS.

ARG:	PROTESTANT TYPE REQUIRED

A VALID VALUE IS REQUIRED IN THE PROTESTANT TYPE FIELD VALID VALUES ARE: D - DRAWBACK CLAIMANT F - FOREIGN MAUFACTURER/PRODUCER/EXPORTER I - IMPORTER/CONSIGNEE M - MASTER OF VESSEL S - SURETY V - VESSEL OPERATOR O - OTHER

EJ9:	INVALID INVOICE NUMBER FORMAT

INVOICE NUMBERS CAN CONSIST ONLY OF LETTERS, NUMBERS, SLASHES, OR DASHES. TRAILING SPACES ARE ALLOWED, IMBEDDED SPACES ARE NOT. LETTERS MUST BE IN UPPER CASE. NOTE: AS OF MAY 1995, THE SLASH (/) IS NO LONGER PERMITTED AS A VALID CHARACTER IN THE INVOICE NUMBER. THE INVOICE NUMBER IS TRANSMITTED IN THE C01 REC, POS 20-36.

 Next 10 >>Showing results 1 to 25 of 1405