ABI Error Message

1C6:	DUPLICATE ADD ERROR

THIS DRAWBACK MODULE MESSAGE MEANS THAT THE IMPORT ENTRY CITED ON THE DRAWBACK DISKETTE WAS SHOWN MORE THAN ONCE. SINCE THE DISKETTE AND ABI TRANSMISSION ARE CLAIM SUMMARIES, FILERS ARE INSTRUCTED TO ONLY SHOW AN IMPORT ENTRY ONE TIME AND SUMMARIZE THE TOTAL CLAIMED AMOUNT FOR THAT ENTRY. ON THE LEGAL PAPER CLAIM, A SINGLE IMPORT ENTRY MAY BE SHOWN MANY TIMES (FOR EXAMPLE, WHEN THEY BREAK A CLAIM DOWN BY PART NUMBER), BUT ON THE DISKETTE IT CAN ONLY APPEAR ONCE.

10N:	I.T. FOR IMMEDIATE EXPORTATION

THIS MESSAGE OCCURS IN THE ABI EI AND HI TRANSACTIONS WHEN AN I.T. IS SENT IN POSITIONS 3-14 OF THE EI 22 RECORD OR IN POSITIONS 3-14 OF THE HI HA RECORD THAT HAS BEEN INPUT IN THE IN-BOND SYSTEM AS A CODE 63, I.T. FOR IMMEDIATE EXPORTATION. THE TYPE MUST BE CHANGED TO A NON-EXPORT TYPE BEFORE THE ENTRY CAN BE RESENT.

4BO:	REMOTE ENTRY-CANNOT DEL FROM STMT

A REMOTE-FILE ENTRY CANNOT BE REMOVED FROM ABI STATEMENT.

BRX:	EARLIEST IMPRT DATE MUST = SPACES

RECONCILIATION: WHEN THE R10 ISSUE CODE IS NOT = 'NF', THE R10 EARLIEST IMP DATE MUST = SPACES.

EJC:	INVALID DIFFERENCE REASON CODE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD, POS 22-23, PROVIDES FOR THE INSERTION OF ONE OF 24 VALID TWO-CHARACTER "REASON FOR DIFFERENCE CODES". THE USE OF ANY OTHER CODE, OR A BLANK FIELD, WILL GENERATE THIS ERROR MESSAGE.

95A:	21 REC REQ'D FOR SINGLE ENT BOND

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). EFFECTIVE JANUARY 1, 1999, ENTRY SUMMARIES WHICH REFLECT A SINGLE TRANSACTION BOND TYPE (CODE = 9) MUST ALSO CONTAIN A 21 RECORD TO REPORT THE BOND AMOUNT AND THE BOND PRODUCER IDENTIFICATION NUMBER. UNTIL JANUARY 1, 1999, FILERS MAY TRANSMIT SUMMARY DATA WITHOUT THIS RECORD, HOWEVER.

DKN:	D50 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE COULD BE THE RESULT OF A DRAWBACK DISKETTE OR ABI DRAWBACK PROBLEM. IT IS SAYING THAT WHEN CUSTOMS FORMATTED THE RECORDS FROM THE DRAWBACK DISKETTE OR WHEN THE DATA WAS SENT VIA ABI, NO DATA WAS PRESENT IN THE GIVEN RECORD. IF THE DRAWBACK DISKETTE HAS NO DATA, THE PC PROGRAM SHOULD STOP IT BEFORE TRANSMISSION; HOWEVER, THERE MAY HAVE BEEN DATA THERE, BUT IT WAS BAD DATA.

EI1:	ARTICLE A NEEDED FOR ARTICLE B

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C31 RECORD ENABLES FILERS TO REPORT SPECIFIC DATA ON ITEM NUMBERS FOR AN INVOICE LINE. POS 8-42 ARE USED TO PROVIDE AN IDENTIFICATION NUMBER FOR THE ITEM ON THE INVOICE LINE (PART NUMBER, CATALOG NUMBER, ETC). A FURTHER DEFINITION (BUYER'S PART NUMBER, ETC) IS PERMITTED IN POS 43-77. THESE TWO FIELDS ARE IDENTIFED AS "ITEM A" AND "ITEM B". IF DATA APPEARS IN THE "ITEM B" FIELD, DATA MUST ALSO APPEAR IN THE "ITEM A" FIELD. IF NOT, THIS ERROR MESSAGE WILL BE GENERATE.

17L:	APPLICATION NOT AVAILABLE

THE APPLICATION CONTROL RECORD IN THE APPLICATION CONTROL FILE IS SET TO "OFF". ACTION: RESTART THE APPLICATION AFTER THE ENABLE SWITCH IN THE FILE IS SET TO "ON" OR THE CORRECT APPLICATION CODE IS SELECTED.

1C1:	MISSING VESSEL CODE/NAME

FOR OCEAN IMPORT SHIPMENTS, THE VESSEL NAME FIELD OR VESSEL CODE FIELD MUST BE FILLED IN. VESSEL CODES ARE NO LONGER USED AND ARE NOT GENERALLY AVAILABLE TO THE PUBLIC. THEREFORE, IF THE VESSEL FIELD IS LEFT BLANK (REPORTED IN REC H2, POS 60-79) ON THE CARGO INPUT APPLICATION (CODE HI), THIS ERROR MESSAGE WILL BE GENERATED.

VA2:	UNKNOWN AGY IN 'OA' DECLARATION

THE OA DECLARATION IS A RECORD IN AN OTHER GOVERNMENT AGENCY DATA SET IN AN AUTOMATED TRANSACTION. IT IS THE RECORD WHERE A FILER CAN "DISCLAIM" A TARIFF NUMBER FROM OGA DATA. AS OF 5/99 THE PERMITTED OTHER AGENCIES ARE FDA (FD0), FWS (FW0), DOT (DT0) AND FCC (FC0). IN AN ENTRY SUMMARY TRANSACTION (EI) THE OA RECORD FOLLOWS THE 50 RECORD. IN A CARGO SELECTIVITY TRANSACTION (HI) THE OA RECORD FOLLOWS THE H5 RECORD (FDA, FWS AND DOT). IN A BORDER CARGO SELECTIVITY TRANSACTION (HN) THE OA RECORD FOLLOWS THE 02 RECORD (FDA,FWS,DOT). THE OGA DISCLAIMER IS SENT IN POSITIONS 5-7 OF THE OA RECORD. SUBSEQUENT DISCLAIMERS ARE SENT IN POSITIONS 8-10, 11-13, 14-16 AND 17-19, WHEN APPLICABLE . THIS ERROR MESSAGE WILL OCCUR IF THE OTHER AGENCY SENT IN POSITIONS 5-6 (OR 8-9, 11-12, 14-15, 17-18) IS NOT A VALID OGA INTERFACE AGENCY.

AR7:	NOTIFY SUB. DATA REJECTED

NOTIFY SUBSTITUTE DATA REJECTED.

Q07:	STATEMENT FILER NOT = 'QT' FILER

FILER ON STATEMENT NOT EQUAL TO FILER GIVEN ON THE 'QT' RECORD. IF THE FILER CODE IS OMITTED ENTIRELY FROM POS 11-13 IN THE QT RECORD, ERROR MESSAGE Q03 WILL BE GENERATED. ONLY IF THE FILER CODE IN THE QT RECORD IS NOT AN EXACT MATCH TO THAT ON THE DATA FILE FOR THE STATEMENT NUMBER IN THE TRANSACTION WILL THIS ERROR MESSAGE BE GENERATED.

VER:	***ISIS TABLE OVERFLOW - ERROR***

THIS MESSAGE IS INTERNAL TO FDA'S ISIS PROCESSING SYSTEM. IT WILL OCCUR IN SEVERAL APPLICATIONS UNDER FILER CODE 9900/I99.

553:	ENTRY NOT FOUND FOR DELETE

THIS MESSAGE OCCURS WHEN A FILER SENDS AN "ACTION CODE" OF 'D' IN POSITION 3 OF THE 10 RECORD SIGNIFYING THAT THEY WANT TO DELETE A PREVIOUSLY TRANSMITTED ENTRY BUT THERE IS NO ABI ENTRY INFORMATION ON FILE TO DELETE. THIS MOST COMMONLY HAPPENS WHEN A FILER TRIES TO DELETE A SUMMARY THAT MAY HAVE ORIGINALLY RECEIVED AN "ERROR FREE" STATUS THEN WAS SUBSEQUENTLY REJECTED THEREFORE WIPING OUT THE DATA. A FILER CAN ONLY DELETE A SUMMARY IF IT IS IN "ERROR FREE" STATUS AND HAS NOT BEEN ACCEPTED/PROCESSED BY CUSTOMS. IF A FILER ATTEMPTS TO DELETE AN ERROR FREE SUMMARY THAT HAS BEEN ACCEPTED BY CUSTOMS THEY WILL RECEIVE THE '552' "ENTRY DELETE NOT ALLOWED" MESSAGE.

VAQ:	COMM. INVOICE DATA NOT ON FILE

FILERS WHO PARTICIPATE IN THE ELECTRONIC INVOICE PROGRAM (EIP) MUST TRANSMIT COMMERCIAL INVOICE DATA TO ABI PRIOR TO TRANSMITTING THEIR SUMMARY DATA IF THE SUMMARY CONTAINS AN "E" IN POS 56 OF THE 10 RECORD. IF THE FILER IS PARTICIPATING IN THE INVOICE BY REQUEST PROGRAM, THEN IT IS PERMISSABLE TO TRANSMIT THE 42 RECORD WITH THE INVOICE NUMBER AND THE 43 RECORD WITH THE "INVREQ" DATA WITHOUT FIRST TRANSMITTING THE COMMERCIAL INVOICE. HOWEVER, UNLESS ONE OF THE TWO CONDITIONS ABOVE IS MET, A TRANSMISSION OF THE SUMMARY AS AN ELECTRONIC SUMMARY (EIP) WILL BE REJECTED WITH THIS ERROR MESSAGE. **NOTE** IF THE FILER USES MORE THAN ONE 42 RECORD PER 40 RECORD, AND "INVREQ" PERTAINS TO THE 42 RECORD, EACH 42 RECORD MUST BE ACCOMPANIED BY A 43 RECORD. IF THIS PAIRING IS NOT FOLLOWED, THIS ERROR MESSAGE WILL RESULT.

AQT:	AFR QUESTIONS RESPONSES INVALID

WHEN APPLICATION FOR FURTHER REVIEW IS REQUESTED, RESPONSES TO THREE QUESTIONS MUST BE CONCURRENTLY SUBMITTED BY FILER. VALID RESPONSES ARE 'Y' OR 'N'.

27J:	*CENSUS* OR-AGR CHARGES/VALUE

THIS MESSAGE IS GENERATED ON ENTRY SUMMARY INPUT TRANSACATIONS WHEN THE LINE ITEM CHARGES (40 REC, POS 48-57) DIVIDED BY THE LINE ITEM VALUE (40 REC, POS 8-17) EXCEED A STATED PERCENTAGE. IF THE RATIO BETWEEN THE CHARGES AND VALUE EXCEEDS THE PERCENTAGE SHOWN ON TARIFF/CENSUS DATABASE BY MORE THAN 300 PERCENT, THIS ERROR MESSAGE WILL BE GENERATED. (EXAMPLE: VALUE IS $400 FOR TARIFF 8541402000 AND THE CHARGES ARE $100. THIS IS A 25% RATIO. THE RECORD FOR THE TARIFF NUMBER SHOWS 7% AS THE UPPER LIMIT. 7% OF $400 IS $28. 300% OF THIS FIGURE WOULD BE $84. THEREFORE, CHARGES FROM $1 TO $84 WOULD NOT GENERATE THIS WARNING MESSAGE, BUT CHARGES OF $85 OR HIGHER WOULD.) FOR SHIPMENTS BY AIR, THE CHARGES IS SOMETIMES COMPARED TO THE GROSS WEIGHT (40 REC, POS18-27) AND THIS MESSAGE COULD BE GENERATED EVEN IN A CASE WHERE THE CHARGES/VALUE RATIO WAS BELOW 300% OF THE VALUE.

BRJ:	AGGREGATE: ALL AMTS MUST BE ZERO

IF THE RECON IS AN AGGREGATE, ALL MONETARY AMOUNTS ON THE 'R20' IMPORT ENTRY ASSOCIATION RECORDS MUST BE ZERO.

VNI:	FD 701: MLTPLE BASE UNITS INVALID

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 92-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT, THE BASE UNIT MUST BE IN THE LAST POSITION. THE FILER CANNOT SEND MORE THAN ONE BASE UNIT. BASE UNITS ARE LOCATED IN THE CATAIR, PAGE OGA-31. TO SOLVE THIS ERROR, THE FILER MUST USE THE BASE UNIT AND A CONTAINER CODE (S) FOUND ON PAGES OGA 32-33, CATAIR.

EIP:	DELIV TERMS/LOC QUAL INCONSISTENT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). FOR EACH TYPE OF "TERMS OF DELIVERY", A SPECIFIC "LOCATION QUALIFIER" IS PERMITTED IN THE AUTOMATED INVOICE INTERFACE PROGRAM. PAGE AII-23, NOTE 2, OF THE CATAIR LISTS THE ACCEPTABLE COMBINATIONS OF TERMS OF DELIVERY AND LOCATION QUALIFIER. IF THE FILER TRANSMITS ONE OF THE TERMS OF DELIVERY CODES WITH A LOCATION QUALIFIER THAT IS NOT LISTED FOR THAT TERMS OF DELIVERY CODE, THIS ERROR MESSAGE WILL BE GENERATED.

VKZ:	HLT: LEN REQUIRED W/ OPTIONAL POS

A LENGTH VALUED MUST BE SPECIFIED FOR THE OPTIMAL POSITION/LENGTH PARAMETER WHEN A POSITION IS SPECIFIED.

VGA:	FD701: INV LINE#/SEQ

THIS ERROR MESSAGE RESULTS WHEN A FILER SENDS AN FDA CORRECTION (CP TRANSACTION) TO RESPOND TO AN FDA DT REJECT MESSAGE AND THE CUSTOMS LINES THAT THEY ARE SENDING IN THE FDA CORRECTION DO NOT MATCH THE EXACT SEQUENCE OF LINES IN THE SELECTIVITY RECORD. WHEN A CORRECTION IS DONE, THE FILER MUST SEND THE CUSTOMS LINES (WITH THE CORRESPONDING FDA DATA OR DISCLAIM AS APPLICABLE) IN THE EXACT ORDER AS IT APPEARS ON THE SELECTIVITY LINE ITEM SCREEN. THE FILER MUST ALSO SEND ALL CUSTOMS LINES WHETHER OR NOT THEY ARE FDA REGULATED. CHECK THE ORDER OF THE TARIFF NUMBERS IN THE CP SEND AGAINST THE SELECTIVITY LINE ITEM SCREEN. THEY MUST MATCH EXACTLY. THIS MESSAGE ALSO RESULTS WHEN A FILER ATTEMPS TO START A FDA LINE NUMBER WITHIN A CUSTOMS LINE WITH A NUMBER OTHER THAN 001. THE MOST COMMON OCCURANCE IS WHEN CUSTOMS LINE 001 IS SENT AND, FOR EXAMPLE FDA LINES 001 AND 002 ARE SENT WITH IT. THEN THE FILER SENDS CUSTOMS LINE 002 AND STARTS THE FDA LINE NUMBERING WITH 003. THIS REJECT WILL ALSO OCCUR IF THE FILER SENDS BOTH AN FD0 (DISCLAIM) AND FDA DATA FOR THE SAME CUSTOMS LINE ON AN ENTRY SUMMARY INPUT TRANSACTION.

B08:	MID CODE NOT ON FILE

INPUT MANUFACTURER IDENTIFIER FIELD DOES NOT EXIST ON THE MANUFACTURER DATABASE. THIS ERROR IS GENERATED IN RESPONSE TO A MANUFACTURER QUERY, ABI APPLICATION $N.

VG8:	FEI # INVALID,2 LEADING 0'S REQD

THIS ERROR MESSAGE OCCURS IN THE FEI (FDA ESTABLISHMENT IDENTIFIER) QUERY, SPECIFICALLY WHEN A QUERY (Q) IS SENT IN POSITION 5 OF THE FDPP 10 RECORD AND THE FEI NUMBER BEING QUERIED IN POSITIONS 6-17 DOES NOT START WITH A MINIMUM OF TWO LEADING ZEROES.

 Next 10 >>Showing results 1 to 25 of 1405