ABI Error Message

Q09:	STATEMENT NOT ELIGIBLE FOR ACH

IF THE PROFILE RECORD FOR THE FILER OF THE QT RECORD IS NOT SET TO "Y" FOR THE ACH ELEMENT, THIS MESSAGE WILL RESULT. THE ABE RECORD FOR THE FILER SHOULD BE CORRECTED. NOTE: EVEN AFTER THE CORRECTION HAS BEEN DONE, THE REJECTED QT CANNOT BE REPROCESSED FOR PAYMENT VIA ACH UNLESS POSITION 555 ON THE STATEMENT FILE IS RESET TO A "1" OR THE FILER CAN PAY BY CHECK OR THE FILER CAN MOVE THE ENTRIES TO A NEW (FUTURE) PAYMENT DUE DATE. NOTE: IF THE STATEMENT IS ELIGIBLE FOR CHECK PAYMENT AND A COLLECTION HAS BEEN STARTED, BUT NOT COMPLETED, THIS ERROR MESSAGE WILL ALSO RESULT.

VL7:	DRAWBACK DDPP NOT FOUND

THIS MESSAGE MEANS THAT THE FILER HAS USED AN IMPOSSIBLE DDPP IN THE DRAWBACK MODULE.

ACW:	STATE CODE MUST BE 'FN'

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADDED 5106" TRANSACTION, APPLICATION IDENTIFIER TI. IF THE ABI FILER REQUESTS A CUSTOMS-ASSIGNED NUMBER FOR A FOREIGN-BASED COMPANY, AND THE COMPANY IS LOCATED IN A COUNTRY OTHER THAN CANADA, THE INPUT RECORDS MUST SHOW "FN" AS THE STATE CODE. IF THE T2 RECORD, POS 68-69 DOES NOT REFLECT "FN" OR IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED.

AD1:	HOUSE INVALID WITHOUT MASTER

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). IF A HOUSE BILL IS TRANSMITTED IN THE HA RECORD, POSITION 27-38, A MASTER BILL NUMBER IS REQUIRED IN POSITIONS 15-26.

40K:	SPI INVALID FOR EXP COUNTRY

SPECIAL PROGRAM INDICATORS, LISTED IN THE CATAIR ON PAGES ENS-48 AND 49 MAY NOT BE VALID FOR ALL PROGRAMS FOR ALL COUNTRIES. FOR EXAMPLE, ECUADOR IS ELIGIBLE FOR THE ANDEAN PREFERENCE PROGRAM (SPI "J"), BUT IS NOT ELIGIBLE FOR THE CARRIBEAN PREFERENCE PROGRAM (SPI "E"). THEREFORE, AN ENTRY SUMMARY INPUT TRANSACTION THAT USED CODE "E" WITH ISO CODE "EC" AS THE COUNTRY OF EXPORT WOULD RECEIVE THIS ERROR MESSAGE.

79R:	MANUFACTURER I.D. IS MISSING

MANUFACTURER I. D. IS REQUIRED FOR CARGO RELEASE PROCESSING.

VPP:	EXPORT DT CANNOT BE > SYS DATE +2

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN POSITIONS 22-27 OF THE D01 RECORD AND CANNOT BE MORE THAN 2 DAYS IN ADVANCE OF THE SYSTEM DATE.

VME:	WHSE PERIOD EXPIRED

THE ENTRY DATE ON A WAREHOUSE WITHDRAWAL WAS MORE THAN FIVE YEARS FROM THE IMPORT DATE OF THE ORIGINAL WAREHOUSE ENTRY SUMMARY.

EIB:	INVALID EXCHANGE RATE INDICATOR

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE FIXED EXCHANGE RATE INDICATOR IS TRANSMITTED IN THE C01, C18, OR C53 RECORDS. THE TWO ACCEPTABLE VALUES FOR THIS ELEMENT ARE "1" (FIXED RATE APPLIES) OR "0" (NO FIXED RATE APPLIES). ANY OTHER VALUE IN THIS FIELD, INCLUDING BLANKS, WILL GENERATE THIS ERROR MESSAGE.

VNI:	FD 701: MLTPLE BASE UNITS INVALID

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 92-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT, THE BASE UNIT MUST BE IN THE LAST POSITION. THE FILER CANNOT SEND MORE THAN ONE BASE UNIT. BASE UNITS ARE LOCATED IN THE CATAIR, PAGE OGA-31. TO SOLVE THIS ERROR, THE FILER MUST USE THE BASE UNIT AND A CONTAINER CODE (S) FOUND ON PAGES OGA 32-33, CATAIR.

14H:	INVALID DUTY ENTERED

DUTY ENTERED ON LINE ITEM IS NON-NUMERIC OR OTHERWISE INVALID.

VGB:	FD 701: PRODUCT CODE NOT ON FILE

THIS ERROR OCCURS WHEN A FILER ATTEMPTS TO USE AN FDA PRODUCT CODE THAT IS NOT ON FILE IN ACS. FDA MAINTAINS THE FILE. THE FILER SHOULD BE INSTRUCTED TO CONTACT THEIR FDA CONTACT TO CHECK THE PRODUCT CODE. THERE ARE APPROXIMATELY 580,000 PRODUCT CODES.

AAS:	COUNTRY/CASE NUMBER MISMATCH

THE COUNTRY OF ORIGIN IN REC 40, POS 6-7, DOES NOT MATCH THE COUNTRY ASSOCIATED WITH THE THREE DIGIT COUNTRY CODE IN THE COUNTERVAILING CASE NUMBER (REC 60, POS 13-15) OR THE ANTIDUMPING CASE NUMBER (POS 33-35).

05C:	ENTRY TYPE INVALID FOR SELECT

ENTRY TYPE IS VALID BUT NOT FOR SELECTIVITY. VALID ENTRY TYPES FOR SELECTIVITY ARE 01-03, 06, 07, 11, 12, 21, 23, 51-53. FLAG FOR "UNLADING (Y/N)" IS SET TO 'N'.

LU1:	LUMBER PERMIT/ORIG CNTRY INVALID

LUMBER PERMIT CANNOT BE ENTERED FOR COUNTRY OF ORIGIN OF 'CA' .

RBJ:	RECON DDPP INVALID

THE FILER HAS GIVEN THE RECON SUMMARY A DDPP THAT IS NOT VALID FOR RECONCILIATION PROCESSING.

AFO:	FILER NOT AII

THIS ERROR MESSAGE WILL OCCUR IF A FILER TRANSMITS AN 'E' INDICATING THAT THE ENTRY SUMMARY IS AN AII SUMMARY IN POSITION 56 OF THE 10 RECORD AND THE FILER IS NOT SET TO 'Y' FOR AII IN THEIR ABI PROFILE RECORD.

AFE:	BOND TYPE INVALID FOR ELEC INV.

ELECTRONIC INVOICE SUMMARY FILINGS ARE INVALID WITH SINGLE-ENTRY BONDS THIS ERROR CODE FORMERLY REFERRED TO 'PRODUCT ANALYSIS CODE', BUT BOTH THE P/A CODE AND THE FORMER MEANING/USE OF ERROR 'AFE' HAVE BEEN 'ARCHIVED'.

EI4:	INVALID ALLOWANCE CHARGE AMOUNT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C17 AND C18 RECORDS PROVIDE FOR THE REPORTING OF HEADER LEVEL CHARGES/ALLOWANCES. (THE C51/C53 RECORDS REPORT THESE ELEMENTS AT THE LINE LEVEL, BUT THIS MESSAGE ALSO APPLIES TO THOSE RECORDS). THE DOLLAR AMOUNT IN POS 4-18 OF THE C18 RECORD MUST VARY BY NO MORE THAN ONE CENT, PLUS OR MINUS, WHEN COMPARED TO THE DOLLAR AMOUNT PRODUCED FROM THE APPROPRIATE CALCULATION THAT OCCURS AS A RESULT OF THE COMBINATION OF ELEMENTS TRANSMITTED ON THE C17 RECORD. THE COMBINATION OF ELEMENTS IN THE C17 RECORD THAT ARE USED IN THE CALCULATION IS: - RATE/PER UNIT X UNIT PRICE BASIS /NBR OF PRICING UNITS (FROM ALL THE PRECEDING C33 RECORDS.) (IF C51/53 RECORDS ARE USED, ONLY THE C33 RECORD IMMEDIATELY PRECEDING THE C51/53 RECORDS IS USED TO DETERMINE THE NUMBER OF PRICING UNITS).

52Y:	MAXIMUM I7 RECORDS EXCEEDED

REFER TO ADMINISTRATIVE MESSAGE 98-0236, DATED 032098. IN SOME CASES THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) WAS CAUSING DATA BASE ERRORS WHEN THE NUMBER OF I7 ENTRY NUMBER/LINE ITEM SEQUENCE RECORDS EXCEEDED THE LIMIT SET BY THE PROGRAM FOR A PARTICULAR NAME AND ADDRESS I3 AND I4 RECORD SET. ALSO, IN SOME REJECT SITUATIONS THE ERROR MESSAGE "524 TRANSACTION DATA REJECTED" WAS DISPLAYING ERRONEOUSLY IN THE IB OUTPUT MESSAGES WHEN THE ENTIRE IJ APPLICATION WAS NOT REJECTED. TO ELIMINATE THE ABOVE SITUATIONS AND TO PROVIDE MORE ACCURATE INFORMATION WHEN ERRORS ARE DETECTED IN THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) TRANSMISSIONS, THIS ERROR MESSAGE AND 52Z "ENTRY/LINE SEQUENCE REJECTED" ARE GENERATED. BOTH THE 52Y AND 52Z MESSAGES WILL APPEAR AS IB OUTPUT RECORDS WHEN CUSTOMS DETERMINES THAT THE INFORMATION TRANSMITTED CANNOT BE ADDED TO THE DATABASE AS REQUESTED BY AN ABI FILER.

4F8:	COUNTRY CODE INVALID

COUNTRY CODE MUST BE VALID, ALPHABETIC ISO CODE OR 99 FOR A GLOBAL QUOTA. 99 MAY ONLY BE USED BY HEADQUARTERS QUOTA. IF THE FIELD CONTAINS NUMBERS OTHER THAN 99, IS LEFT BLANK, OR IS NOT A VALID ISO CODE, THIS MESSAGE WILL BE PROVIDED.

DKM:	INVALID CANADIAN TARIFF FORMAT

CANADIAN TARIFF NUMBERS ARE THE SAME FORMAT AS OUR HS NUMBERS, 10 NUMERIC CHARACTERS WITH NO ALPHA OR SPECIAL CHARACTERS. FOR MEXICO, SHOULD MEXICO DECIDE TO GO WITH A TARIFF NUMBER OF LESS THAN 10 POSITIONS, THE NUMBER SHOULD INCLUDE TRAILING ZEROES TO FILL OUT THE 10 NUMERICS.

VAP:	FIRMS REQUIRED FOR CERTIFICATION

A FACILITIES INFORMATION AND RESOURCES MANAGEMENT SYSTEM (FIRMS) CODE IS IS REQUIRED FOR ANY ENTRY SUMMARY INPUT THAT REQUESTS CARGO CERTIFICATION IN THE 3O REC, POS 38. THE FIRMS CODE IS TRANSMITTED IN THE 20 REC, POS 72-75. IF THE FIRMS CODE IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

AAX:	RATE ACCEPTED-DUTY NOT CALCULATED

THIS MESSAGE WILL RESULT FOR CERTAIN ANTI-DUMPING OR COUNTERVAILING DUTY CASES WHICH ARE SUBJECT TO A SPECIFIC ANTI-DUMPING OR COUNTERVAILING DUTY RATE AS OPPOSED TO AN 'AD VALOREM' RATE. THIS IS A WARNING MESSAGE AND MERELY INFORMS THE FILER THAT THE AMOUNT OF DUTY BEING TRANSMITTED IS NOT BEING VERIFIED BY ABI.

2AL:	SURETY CODE INVALID

IF THE FILER TRANSMITS BOND CODE 8 (CONTINUOUS BOND) IN THE SUMMARY INPUT (REC 10, POS 49), THE SURETY CODE IN REC 10, POS 73-75 MUST BE LISTED ON THE BOND DATABASE FILE AND MUST BE IN ACTIVE STATUS. IN ADDITION, THE SURETY CODE CITED IN THE 10 RECORD MUST MATCH THE SURETY CODE IN THE BOND DATABASE FILE FOR THE IMPORTER NUMBER TRANSMITTED IN REC 10, POS 8-19. (THE SURETY CODE FIELD CANNOT BE BLANK, EITHER). IF CASH IS USED IN LIEU OF A BOND, THE BOND TYPE MUST BE A "9" AND SURETY CODE "998" MUST BE USED. IF BOND TYPE "0" IS SENT, AND NO SURETY CODE IS SENT, AS WELL, THIS MESSAGES RESULTS. THIS MESSAGE WILL ALSO APPEAR IF THE IMPORTER HAS TWO ACTIVE CONTINUOUS BONDS IN EFFECT AT THE SAME TIME. THE SURETY CODE FOR THE BOND THAT WENT INTO EFFECT FIRST MUST BE USED ON SUMMARY INPUT TRANSACTIONS. SURETY CODES ARE VALIDATED BASED ON DATE OF RELEASE, SO A SUMMARY TRANSMITTED WITH A SURETY CODE BASED ON ESTIMATED ENTRY DATE WILL ALSO REJECT IF A DIFFERENT SURETY CODE WAS IN EFFECT AT THE TIME OF RELEASE. FOR RECONCILIATION, THE SURETY CODE GIVEN MUST BE VALID ON CUSTOMS FILE.

 Next 10 >>Showing results 1 to 25 of 1405