ABI Error Message

VDR:	FTZ ENTRY REQUIRES FIRMS CODE

THE FIRMS CODE (REC 20, POS 72-75) IS MANDATORY FOR ENTRY TYPE 06 (EI APPLICATION) OR REC H2, POS 3-6 IN THE HI APPLICATION.

ST1:	PREVIOUS SET IS INCOMPLETE

THE PROCESSING OF A SET WAS IN PROGRESS WHEN THIS LINE INTERRUPTED THE SET. IN ABI TERMS, THIS MEANS THAT AN "X" LINE WAS DETECTED ON A PREVIOUS LINE IN THE SUMMARY INPUT (APPLICATION EI), BUT NO "V" LINES OCCURRED PRIOR TO THE REPORTING OF THE LINE BEING REJECTED. FOR EXAMPLE, IF LINE 4 HAS AN "X", LINES 5 AND 6, AT A MINIMUM, MUST HAVE "V" INDICATORS. IF LINE 5 DOES NOT SHOW THE "V", IT WILL BE SHOWN IN THE OUTPUT TO THE FILER WITH THIS ERROR MESSAGE.

EJX:	UNITS MUST BE IN ORDER

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). SHIPPING UNIT IDENTIFICATIONS CAN BE MADE AT TWO LEVELS, IN THE C06/C07 RECORD AND/OR THE C47/C49 RECORDS. IN EITHER CASE, THE OUTER SHIPPING UNIT (USUALLY A CONTAINER) IS IDENTIFIED IN THE C06 RECORD. IF INTERIOR PACKAGING ENTITIES ARE SEPARATELY IDENTIFIED WITHIN A CONTAINER, THOSE IDENTIFIERS ARE REPORTED IN THE C07/C49 REC. EACH OF THESE RECORDS PROVIDES SPACE TO REPORT ONE OR TWO INTERIOR PACKAGING UNIT IDENTIFIERS (OR A RANGE OF IDENTIFIERS). THE INTERIOR PACKAGING IDENTIFERS MUST BE UNIQUE AND MUST BE REPORTED IN ORDER. THAT IS, THE C07 REC, POS 4-20, IS USED TO REPORT THE FIRST PACKAGING IDENTIFIER. THE NUMBER IN THIS FIELD MUST BE DIFFERENT FROM THE UNIT IDENTIFIER IN POS 21-37. FURTHER, DATA CANNOT BE TRANSMITTED IN POS 21-37 UNLESS POS 4-20 IS USED FIRST. WHEN REPORTING RANGES, THE NUMBER OF DIGITS IN THE HIGHEST RANGE MUST BE FOLLOWED FOR ALL RANGES (USE 0001 TO 0800 IF THE HIGHEST NUMBER IN THE RANGE IS 4000, NOT 1 TO 800, 801 TO 1600, FOR EXAMPLE).

D08:	DATE IS INVALID

THIS DRAWBACK ERROR MESSAGE MEANS THAT THE DATE IS NOT IN A VALID YYMMDDFORMAT (IN Y2K YYYYMMDD).

17L:	APPLICATION NOT AVAILABLE

THE APPLICATION CONTROL RECORD IN THE APPLICATION CONTROL FILE IS SET TO "OFF". ACTION: RESTART THE APPLICATION AFTER THE ENABLE SWITCH IN THE FILE IS SET TO "ON" OR THE CORRECT APPLICATION CODE IS SELECTED.

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

VOX:	NOTICE: TOTAL CLAIMS EXCEED BOND

THIS DRAWBACK MODULE MESSAGE WILL OCCUR ONCE THE TOTAL OF ALL CLAIMS MADE AGAINST A VALID 1A DRAWBACK BOND DURING THE CURRENT BOND YEAR EXCEED THE VALUE OF THE BOND. THIS IS A FATAL ERROR, AND FULL BOND COVERAGE IS REQUIRED.

055:	INVALID BROKER CODE

NEW FILER CODES MUST BE 3 DIGIT ALPHA/NUMERIC. BROKER CODE IS REQUIRED INPUT FOR THIS TRANSACTION AND WAS OMITTED.

VBW:	DT HS7: WARN - TIRE BRAND MISSING

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37 AND THE TIRE MANUFACTURER ID CODE IN POSITIONS 38-40, THE TIRE MANUFACTURER BRAND NAME SHOULD BE SENT IN POSITIONS 41-60.

BRL:	FEE CODE INVALID FOR ENTRY

THE FEE CLASS CODE GIVEN BY THE FILER ON THE RECON 'R21' RECORD DID NOT EXIST AS A VALID FEE CLASS CODE ON THE IMPORT ENTRY.

8WR:	INVALID CONTROL ID / RECORD TYPE

THIS MESSAGE INDICATES A CONFLICT BETWEEN THE APPLICATION IDENTIFIER, WHICH IS TRANSMITTED IN THE "B" REC, POS 11-12 AND THE DETAIL RECORD IDENTIFIERS TRANSMITTED BETWEEN THE "B" AND "Y" RECORDS. EACH SEPARATE ABI APPLICATION HAS DESIGNATED RECORDS THAT CAN BE SENT IN THAT APPLICATION. IF ANY OTHER RECORDS ARE SENT WITH DIFFERENT RECORD IDENTIFIERS NOT ALLOWED BY THAT PARTICULAR APPLICATION, THIS MESSAGE WILL RESULT. AN EXAMPLE WOULD BE A TRANSMISSION OF THE TIB EXTENSION APPLICATION, WHICH WOULD HAVE "XN" IN THE "B" RECORD. THE INPUT RECORDS FOR THIS APPLICATION MUST ALL START WITH "XA". ANY OTHER RECORD IDENTIFIERS WILL BE REJECTED.

APX:	FAX INDICATOR CANNOT CHANGE

NOTIFICATION TO CUSTOMS THAT A FACSIMILE WAS SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT INITIAL FILING OF PROTEST, CLAIM OR INTERVENTION. 'N' INDICATES THAT NO FACSIMILE WAS SENT. NO VALUE SUBMITTED IN THE FAX INDICATOR WILL BE ACCEPTED AFTER INITIAL FILING.

40K:	SPI INVALID FOR EXP COUNTRY

SPECIAL PROGRAM INDICATORS, LISTED IN THE CATAIR ON PAGES ENS-48 AND 49 MAY NOT BE VALID FOR ALL PROGRAMS FOR ALL COUNTRIES. FOR EXAMPLE, ECUADOR IS ELIGIBLE FOR THE ANDEAN PREFERENCE PROGRAM (SPI "J"), BUT IS NOT ELIGIBLE FOR THE CARRIBEAN PREFERENCE PROGRAM (SPI "E"). THEREFORE, AN ENTRY SUMMARY INPUT TRANSACTION THAT USED CODE "E" WITH ISO CODE "EC" AS THE COUNTRY OF EXPORT WOULD RECEIVE THIS ERROR MESSAGE.

ACU:	LOWER CASE ALPHABETIC INVALID

THIS MESSAGE WILL BE GENERATED IN RESPONSE TO AN IMPORTER ADD TRANSACTION, APPLICATION IDENTIFIER TI. IF THE FILER TRANSMITS LOWER CASE ALPHA CHARACTER IN HIS INPUT, THIS MESSAGE WILL RESULT.

VBZ:	DT HS7: INVALID TIRE CODE

IF A TIRE CODE (RECORD DT01, POS 38-40) IS TRANSMITTED WITH A SPACE IN ONE OF THE THREE CHARACTERS, THIS MESSAGE WILL RESULT. THE CODE MUST CONTAIN SOME COMBINATION OF THREE NUMBERS OR LETTERS. SINCE DOT GIVES OUT 2-CHARACTER CODES THE FILER MUST ADD EITHER A LEADING OR TRAILING ZERO.

03L:	INVALID IT NUMBER

CONVENTIONAL INBOND NUMBERS MUST BE 9-DIGITS LONG AT THE CURRENT TIME. TRANSMISSIONS THAT CONTAIN FEWER THAN 9 DIGITS WILL RESULT IN THIS ERROR MESSAGE.

ST3:	LAST SET ON ENTRY IS INCOMPLETE

AN INCOMPLETE SET WAS CLOSED OUT IN THIS ENTRY FOR ABI REVIEW PURPOSES, THIS MESSAGE WILL USUALLY BE ACCOMPANIED BY ERROR MESSAGE ST1, PREVIOUS SET IS INCOMPLETE. ERROR MESSAGE ST3 INDICATES THAT THE LAST REPORTED SET DOES NOT HAVE AT LEAST TWO SUBSEQUENT 40 RECORDS WITH "V" INDICATORS SHOWN IN POS 80 OF THE 50 RECORD. THE FIRST 'V' LINE MUST REFLECT THE SAME HTS NUMBER AS IN THE 'X' AND AT LEAST ONE MORE 'V' LINE MUST BE PRESENT WITH A DIFFERENT HARMONIZED NUMBER.

AQB:	FILING DDPP NOT ON FILE

THE VALUE SUBMITTED IN THE FILING DDPP FIELD IS NOT A VALID VALUE ON THE CUSTOMS REGION-DISTRICT-PORT DATABASE.

VON:	ENTRY FLR MUST=PREPARER FLR

THE REMOTE PREPARER FILER CODE SENT IN POSITIONS 51-53 OF THE EI 'B' RECORD MUST BE THE SAME AS THE PROCESSING (ENTRY) FILER CODE, POSITIONS 59-61.

8WT:	INVALID CHG: AMS TO NON AMS FIRMS

THIS MESSAGE IS GENERALLY USED IN CONJUNCTION WITH THE BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE ENTRY IN QUESTION REFLECTS A FIRMS CODE FOR A LOCATION THAT IS AN AIR AMS PARTICIPANT, THE FILER OF THE ENTRY MAY NOT USE THE BILL OF LADING UPDATE APPLICATION TO REQUEST A NEW FIRMS CODE, IF THAT INTENDED FIRMS CODE IS NOT ALSO AN AIR AMS FACILITY. IN SUCH A CASE, CHANGES OF THIS TYPE MUST BE MADE BY AN INSPECTOR A A SELECTIVITY SITE.

VNH:	FD 701: BASE UNIT MUST BE LAST

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31.

4GS:	NO QUOTA RECORDS FOR TARIFF

QUOTA RECORDS CONTAIN QUOTA TYPE = 'S' (STATISTICAL). THESE RECORDS ARE NOT FOR PUBLIC KNOWLEDGE PER CITA.

VGH:	FD 701: NO FDA MFR NAME/ADDR

DATA SUBMITTED AS PART OF THE FDA INTERFACE MUST INCLUDE AN MID THAT REPRESENTS THE ACTUAL MANUFACTURER. THIS MID WILL BE COMPARED TO THOSE LISTED ON THE MID FILE. IF THE MID IN QUESTION IS LISTED ON THIS FILE IN "PENDING" STATUS, THIS MESSAGE WILL RESULT. THE MID FILE NO LONGER ACCEPTS MID'S WITHOUT NAMES AND ADDRESSES, SO THE PENDING FILE SHOULD NOT INCREASE IN SIZE. THIS MESSAGE SHOULD NOT OCCUR IN NORMAL ABI INPUT TRANSACTIONS.

EIY:	INVALID RELATE DOCUMENT ID

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C19 RECORD IS USED TO REPORT THE PRESENCE OF DOCUMENTS THAT MAY RELATE TO THE INVOICE IN QUESTION. IF THE C19 RECORD IS USED, POS 4-6 MUST REFLECT ONE OF THE ACCEPTABLE VALUES FOR THE RELATED DOCUMENT IDENTIFIER. THESE IDENTIFIERS ARE LISTED IN APPENDIX B TO THE CATAIR. THE USE OF ANY INDICATOR NOT LISTED IN APPENDIX B WILL GENERATE THIS ERROR MESSAGE.

03N:	B/L NBR.REQD W/MAS MIB MVMNT

THE USER IS REQUIRED TO ENTER A BILL OF LADING NUMBER FOR ANY ACTIVITY INVOICED AGAINST AN AUTOMATED MANIFEST - MANIFEST INBOND ITEM.

 Next 10 >>Showing results 1 to 25 of 1405