ABI Error Message

14I:	QUANTITY/UNIT OF MEASURE MISMATCH

MISMATCH CONDITION BETWEEN ENTERED QUANTITY AND ENTERED UNIT OF MEASURE HAS BEEN DISCOVERED.

4HI:	NO QUOTA FOR COUNTRY/CATEGORY

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ABI QUOTA QUERY INPUT. IF THE CATEGORY AND COUNTRY IDENTIFIED BY THE TRANSMITTING FILER DO NOT RESULT IN A MATCH OF THE VARIOUS QUOTA FILES, THIS MESSAGE WILL BE SENT TO THE FILER AS A RESPONSE

ADK:	RLSE FILER NOT=CONSL FILER

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION, APPLICATION IDENTIFIER EI. THE ENTRY FILER CODE IN THE 32 REC, POS 13-15, MUST AGREE WITH THE FILER CODE OF THE SUMMARY, IN THE 10 REC, POS 58-60. IF THE CODES ARE NOT IDENTICAL, THIS ERROR MESSAGE WILL RESULT.

VPY:	D31 RECORD NOT REQUIRED

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE D31 RECORD SPECIFIES THE ADD OR CVD BONDED OR PAYABLE DUTIES. IT IS SENT IN COMBINATION WITH A D11 RECORD WHICH DETAILS THE ADD OR CVD SUMMARY INFORMATION. THIS ERROR MESSAGE IS GENERATED IF A D31 RECORD IS SENT WITHOUT A MATCHING D11 RECORD.

8WW:	MASTER BL/AWB NUMBER REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE L3 RECORD IS TRANSMITTED, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER, THE MANIFESTED QUANTITY AND THE MANIFESTED UNIT OF MEASURE ARE REQUIRED. OTHER ELEMENTS ON THE L3 RECORD ARE OPTIONAL. IF ONE OR MORE OF THE REQUIRED ELEMENTS ARE NOT PRESENT IN THE L3 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

96V:	DATE IS JANUARY 1ST

THIS MESSAGE OCCURS IN THE ABI 'HP' (STATEMENT ADD/DELETE) TRANSACTION WHEN PAYMENT DUE DATE, SENT IN POSITIONS 19-24 OF THE 'H' RECORD, IS JANUARY 1.

EI0:	INVOICE LINE CAN'T BE ZERO

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). EACH ITEM ON AN INVOICE IS DESCRIBED IN THE C31 THROUGH C39 RECORDS. THE C31 RECORD CONTAINS A COUNTER CALLED THE INVOICE LINE NUMBER IN POS 4-7. THE FIRST SUCH RECORD TRANSMITTED ON AN INVOICE INPUT WOULD BE "001", ETC. "000" IS NOT A VALID INVOICE LINE NUMBER AND WILL GENERATE THIS ERROR MESSAGE IF USED.

440:	TARIFF NBR INVALID FOR ENTRY TYPE

THIS MESSAGE WILL BE GENERATED WHEN A TARIFF NUMBER IS TRANSMITTED THAT DOES NOT PERTAIN TO THE ENTRY TYPE. MOST OFTEN, THE CAUSE OF THIS ERROR MESSAGE IS THE USE OF A NON-TIB TARIFF NUMBER WITH ENTRY TYPE 23.

VNG:	FD 701: UOM INVALID/UNKNOWN

A MAXIMUM OF SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE SENT ON A SINGLE FDA LINE. THE UOM MUST BE ONE OF THE BASE UNITS SHOWN ON PAGE OG-31 OF THE CATAIR OR ONE OF THE VALID FDA CONTAINER CODES SHOWN ON PAGES OG-32-33 OF THE CATAIR. IF ANY OTHER UOM IS TRANSMITTED, EVEN IF IT IS A VALID ONE FOR CUSTOMS PURPOSES, THE ABOVE REJECT WILL BE GENERATED.

VEW:	FDA STATUS CONFLICTING/NOT ALLOWD

THIS ERROR MESSAGE IS AN INTERNAL REJECT MESSAGE BETWEEN CUSTOMS ACS AND FDA'S SYSTEM. IT OCCURS WHEN FDA ATTEMPTS TO SEND A PROCESSING STATUS ON AN ENTRY THAT HAS ALREADY BEEN PROCESSED WITH THE SAME STATUS OR A STATUS THAT DENOTES A COMPLETION OF THE ENTRY. THIS MESSAGE DOES NOT GO TO THE FILER NOR DOES IT AFFECT THE FDE STATUS OF THE ENTRY.

8WN:	DATE CHANGE REQUIRES AMS CARRIER

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE FILER ATTEMPTS TO TRANSMIT AN UPDATED ESTIMATED ARRIVAL DATE, THE CARRIER IN THE PORT OF ARRIVAL MUST BE AN AMS CARRIER (AIR OR OCEAN). IF THE CARRIER IS NOT AUTOMATED IN THE PORT OF ARRIVAL, THIS ERROR MESSAGE WILL RESULT.

VGH:	FD 701: NO FDA MFR NAME/ADDR

DATA SUBMITTED AS PART OF THE FDA INTERFACE MUST INCLUDE AN MID THAT REPRESENTS THE ACTUAL MANUFACTURER. THIS MID WILL BE COMPARED TO THOSE LISTED ON THE MID FILE. IF THE MID IN QUESTION IS LISTED ON THIS FILE IN "PENDING" STATUS, THIS MESSAGE WILL RESULT. THE MID FILE NO LONGER ACCEPTS MID'S WITHOUT NAMES AND ADDRESSES, SO THE PENDING FILE SHOULD NOT INCREASE IN SIZE. THIS MESSAGE SHOULD NOT OCCUR IN NORMAL ABI INPUT TRANSACTIONS.

DKQ:	TOTAL CANADA TRAILER COUNT WRONG

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE SUM OF ALL THE DISKETTE 'IT' IMPORT TRAILER, 'CN' CONTRACT TRAILER, 'CM' IMPORT TRAILER, OR 'CI' NAFTA IMPORT TRAILER RECORDS OR ABI 'D12', 'D30', 'D40', OR 'D50' RECORDS DOES NOT ADD UP TO WHAT THE COUNT IS IN THE 'CT CLAIM TRAILER' RECORD, OR ABI 'D90' RECORD. BECAUSE IT DOES NOT ADD UP ABI CANNOT KNOW WHETHER THE TOTAL COUNT IS SIMPLY WRONG, OR THE TOTAL COUNT IS RIGHT AND THERE ARE MISSING RECORDS.

0M9:	INVALID ISO CODE FOR MFG ID

THE TWO CHARACTER ISO CODE USED IN THE MANUFACTURER IDENTIFICATION (MID) FIELD ON SUMMARY OR CARGO RELEASE INPUT TRANSMISSIONS MUST REPRESENT A VALID COUNTRY WHICH IS LISTED ON THE COUNTRY CODE DATABASE. IF THE CODE IS NOT ON THAT DATABASE, THIS ERROR MESSAGE WILL RESULT. THE MID IS TRANSMITTED IN THE SUMMARY INPUT IN REC 60, POS 43-58 AND IN THE CARGO RELEASE INPUT IN REC H5, POS 18-32. IF THE ENTRY INVOLVES A CANADIAN MID, THE ISO CODE MUST BE ONE OF THE 10 CANADIAN PROVINCE CODES (X, FOLLOWED BY AN ALPHA CHARACTER). ERROR MESSAGE AAM WILL BE GENERATED FOR INCORRECT CANADIAN MIDS. FOR AUTOMATED INVOICE (APPL CI), THE RECORDS AFFECTED ARE THE C01 RECORD, THE C08 RECORD, AND THE C11 RECORD.

EIL:	INVALID CURRENCY CODE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). CURRENCY CODES ARE TRANSMITTED IN THE C01 REC, POS 45-4 VALID CURRENCY CODES ARE LISTED IN THE CATAIR IN APPENDIX B. THE USE OF ANY CURRENCY CODE NOT LISTED IN APPENDIX B, OR A BLANK FIELD, WILL GENERATE THIS ERROR MESSAGE.

05D:	INDICATE PAIRED CITIES WITH 'X'

A CHARACTER WAS ENTERED IN THE PAIRED CITIES INDICATOR BUT IT WAS NOT AN 'X'. X' IS THE ONLY VALID CHARACTER FOR INDICATING PAIRED CITIES. IF THIS IS NOT A PAIRED CITIES ENTRY, THE PAIRED INDICATOR SHOULD REMAIN A SPACE.

ST2:	NO PEVIOUS SET HEADER PROCESSED

A SET ITEM (SECONDARY SPI OF 'V') WAS ENTERED WITHOUT A SET HEADER (SECONDARY SPI OF 'X') LINE IMMEDIATELY PRECEDING THIS LINE.

01G:	ENTRY# NOT LESS THAN 50000000

THE NEW ENTRY NUMBER FOR THE FIRST 5 YEARS MUST BE LESS THAN 50000000.

AAI:	MFR ID OR SHIPPER ID REQUIRED

A MANUFACTURER OR SUPPLIER CODE IDENTIFIES THE MANUFACTURER OR SUPPLIER. REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1986, FOR COMPLETE INSTRUCTIONS ON DETERMINING THE MANUFACTURER/SUPPLIER CODE.

APH:	INQUIRY REQ. IND. INVALID

TWO LEVELS OF SERVICE ARE AVAILABLE FOR INQUIRES OF AUTOMATED PROTEST FILINGS: 1. RECAP ONLY; HEADER CARDS P10 AND P11, AND PROCESSING STATUS CARD P12 ONLY WILL BE TRANSMITTED TO REQUESTOR. 2. FULL FILE DUMP; ALL CARDS NECESSARY FOR ENTIRE FILING WILL BE TRANSMITTED TO REQUESTOR. THE VALUE SUBMITTED IN THE INQUIRY REQUEST FIELD IS NOT 1 OR 2; THIS ERROR MESSAGE IS GENERATED AS A RESULT.

387:	WARNING! GSP MAY APPLY

REFER TO THE COUNTRY TARIFF GSP EXCEPTION LIST IN THE HARMONIZED TARIFF SYSTEM OF THE UNITED STATES BOOK.  THIS TYPE ERROR IS NOT BEING COUNTED IN THE ERROR TALLIES IN THE SYSTEM

VNJ:	DCMCI IMPORTER/FILER INVALID

DCMCI ENTRIES FOR EMERGENCY WAR MATERIAL MAY BE ENTERED BY ANY FILER WHO USES ENTRY TYPE 01. IF ENTRY TYPE 51 IS USED, HOWEVER, THE ONLY ACCEPTABLE FILER CODE AND IMPORTER NUMBER MUST BELONG TO DCMCI. THE CURRENT VALID FILER CODE IS P99. IF A DIFFERENT FILER CODE IS USED, THIS ERROR MESSAGE WILL RESULT.

VA3:	FORM REC TYPE INV/OUT OF SEQ

THIS MESSAGE OCCURS IN A FDA INTERFACE ENTRY. THE REQUIRED ORDER OF FDA LINES IS: FD01 FD02 FD03 FD04 (OPTIONAL) FD05 (OPTIONAL) IF ONE OF THE RECORDS IS OMITTED (E.G. FD01 THEN FD03) THIS MESSAGE WILL OCCUR.

8PN:	INVALID DIST/PORT FOR ENTRY

THIS DRAWBACK MODULE MESSAGE MEANS THAT THE IMPORT ENTRY DOES EXIST IN ACS, BUT THE PORT GIVEN DOES NOT MATCH THE PORT ON FILE WITH CUSTOMS. ACS DOES DO A MATCH ON THE IMPORT ENTRY AND THE PORT OF ENTRY GIVEN ON THE DISKETTE BY THE FILER. IF THE FILER USES AN IMPORT ENTRY/PORT COMBINATION THAT IS NOT VALID IN ACS, THIS MESSAGE WILL BE GENERATED. FOR RECONCILIATION, THIS MESSAGE ALSO MEANS THAT THE IMPORT ENTRY EXISTS IN ACS, BUT THE PORT CODE GIVEN DOES NOT MATCH THE PORT ON FILE WITH CUSTOMS. (SEE R20 REC, POS 19-22). THE FILER MAY ALSO GET ERROR MESSAGES 95I, "RECON REQUIRES CONTINUOUS BOND" AND BRI, "BOND NUMBER NOT SAME", FOR THE SAME ENTRY, EVEN THOUGH THE RECON ENTRY HAS A VALID CONTINUOUS BOND AND THE IMPORT ENTRIES HAVE THE SAME BOND NUMBER. CORRECTING THE PORT OF ENTRY ON THE ENTRY THAT RECEIVED ERROR 8PN WILL USUALLY REMOVE THE OTHER TWO ERRORS, AS WELL.

99P:	ADDITIONAL WARNING ON ERRORS

NUMBER OF MESSAGES PASSED BACK TO PROGRAM CALLING ABIGI1 EXCEEDS 10.

 Next 10 >>Showing results 1 to 25 of 1405