ABI Error Message

VHP:	DT HS7: INVAL CONTRACT/STMNT CERT

ONLY A "Y" IS PERMITTED IN REC DT01, POS 36 TO INDICATE THE PRESENCE OF THE IMPORTERS SUBSTANTIATING STATEMENT/CONTRACT/OR MANUFACTURER'S CONFIRMATION LETTER. ANY OTHER CHARACTER WILL RESULT IN THIS ERROR MESSAGE.

VBX:	DT HS7: INVALID VEH. ELIGIBIL. #

THIS ELEMENT MUST BE USED WHEN BOX 03 IS INDICATED ON THE DT01 RECORD. IT IS A SIX POSITION FIELD IN THE FORMAT AAANNN, WHERE AAA MAY EQUAL "VSA", "VCP" OR "VSP", FOLLOWED BY THREE NUMERICS FROM 001 THROUGH 999. THE VEHICLE ELIGIBILITY NUMBER TRANSMITTED BY THE FILER MUST COME FROM A LIST ISSUED BY THE DOT WHICH COVERS EVERY VEHICLE MANUFACTURED WITHIN THE LAST 25 YEARS. ***NOTE**** IF THE INSTANT IMPORTATION IS FOR A VEHICLE WHICH WILL BE ADDED TO THE NEXT REVISION OF THE DOT NON-CONFORMING VEHICLE LIST, THE APPROPRIATE ELIGIBILITY INDICATOR IS "PET" (WHICH STANDS FOR PETITION TO ADD NEW VEHICLE TO THE LIST). NO NUMERICS ARE NECESSARY WHEN PET IS TRANSMITTED.

BR8:	INVALID ACTION CODE

THE FILER HAS ATTEMPTED A TRANSACTION CODE FOR 'RA' OF OTHER THAN 'A', 'R', 'D'.

4F7:	TARIFF NUMBER INVALID

TARIFF NUMBER MUST BE IN THE FOLLOWING FORMAT: ABI - 10 DIGITS, CHECK DIGIT IS UNNECESSARY NON- ABI - 10 DIGITS, AND NUMERIC CHECK DIGIT FROM THE ABOVE, OR IF THE FIELD CONTAINS ALPHABETIC CHARACTERS, THIS MESSAGE WILL BE PROVIDED.

ASH:	ENTRY WITHDRAWAL REQ. N/A

ENTRY WITHDRAWAL REQUEST NOT APPLICABLE.

B99:	ACH TRANS TYPE = 24; AMT MUST = 0

ACH TRANS TYPE (IN 6 RECORD) = 24 WHICH INDICATES $0.00 STATEMENTS. HOWEVER ADDENDA AMT (IN 7 REC) DOES NOT = $0.00.THIS IS PART OF THE ACH CREDIT PROCESS.

DKT:	IMPORT DATE TOO OLD FOR NAFTA

THE CANADIAN IMPORT ENTRY DATE CANNOT BE EARLIER THAN JANUARY 1, 1996, BECAUSE NAFTA DRAWBACK ONLY APPLIES FOR EXPORTS TO CANADA ON OR AFTER JANUARY 1, 1996.

EIP:	DELIV TERMS/LOC QUAL INCONSISTENT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). FOR EACH TYPE OF "TERMS OF DELIVERY", A SPECIFIC "LOCATION QUALIFIER" IS PERMITTED IN THE AUTOMATED INVOICE INTERFACE PROGRAM. PAGE AII-23, NOTE 2, OF THE CATAIR LISTS THE ACCEPTABLE COMBINATIONS OF TERMS OF DELIVERY AND LOCATION QUALIFIER. IF THE FILER TRANSMITS ONE OF THE TERMS OF DELIVERY CODES WITH A LOCATION QUALIFIER THAT IS NOT LISTED FOR THAT TERMS OF DELIVERY CODE, THIS ERROR MESSAGE WILL BE GENERATED.

1L5:	WARNING-NO BOND FOR IMPORTER

THIS MESSAGE IS GENERATED IN RESPONSE TO LINE RELEASE OUTPUT RECORD CREATION. IT IS USUALLY ACCOMPANIED BY ERROR 628 (MISSING/INVALID IMPORTER NUMBER). IF THE BOND IS ASSOCIATED WITH A PROPERLY FORMATTED IMPORTER NUMBER (IN EIN, SSN, OR USCS ASSIGNED NUMBER FORMAT), AND THE IMPORTER NUMBER FORMAT IS NOT IN THE CORRECT FORMAT, THE BOND WILL CONSEQUENTLY BE NOT ON FILE. CORRECTION OF THE IMPORTER NUMBER ERROR WILL USUALLY RESOLVE THE NO BOND ERROR, PROVIDED AN ACTUAL CONTINUOUS BOND EXISTS.

ADQ:	VALID RELEASE ENTRIES REQ'D

THIS MESSAGE OCCURS IN CONSOLIDATED ENTRY SUMMARY TRANSACTIONS. THE RELEASE ENTRY NUMBERS SENT IN THE 32 RECORD OF THE EI TRANSMISSION MUST BE VALID NUMBERS IN THE SELECTIVITY FILE.

8PN:	INVALID DIST/PORT FOR ENTRY

THIS DRAWBACK MODULE MESSAGE MEANS THAT THE IMPORT ENTRY DOES EXIST IN ACS, BUT THE PORT GIVEN DOES NOT MATCH THE PORT ON FILE WITH CUSTOMS. ACS DOES DO A MATCH ON THE IMPORT ENTRY AND THE PORT OF ENTRY GIVEN ON THE DISKETTE BY THE FILER. IF THE FILER USES AN IMPORT ENTRY/PORT COMBINATION THAT IS NOT VALID IN ACS, THIS MESSAGE WILL BE GENERATED. FOR RECONCILIATION, THIS MESSAGE ALSO MEANS THAT THE IMPORT ENTRY EXISTS IN ACS, BUT THE PORT CODE GIVEN DOES NOT MATCH THE PORT ON FILE WITH CUSTOMS. (SEE R20 REC, POS 19-22). THE FILER MAY ALSO GET ERROR MESSAGES 95I, "RECON REQUIRES CONTINUOUS BOND" AND BRI, "BOND NUMBER NOT SAME", FOR THE SAME ENTRY, EVEN THOUGH THE RECON ENTRY HAS A VALID CONTINUOUS BOND AND THE IMPORT ENTRIES HAVE THE SAME BOND NUMBER. CORRECTING THE PORT OF ENTRY ON THE ENTRY THAT RECEIVED ERROR 8PN WILL USUALLY REMOVE THE OTHER TWO ERRORS, AS WELL.

ASR:	PROTESTED ISSUE REJECTED

PROTESTED ISSUE REJECTED.

46D:	SCH PAY DATE INVALID FOR QUOTA

THIS MESSAGE IS GENERATED IN RESPONSE TO A STATEMENT ADD/DELETE TRANSACTION (APPLICATION HP). ENTRIES WITH QUOTA MERCHANDISE THAT HAS BEEN ACCEPTED BY THE QUOTA MODULE MUST BE PAID WITHIN 10 WORKING DAYS FROM THE DATE OF RELEASE OF THE CARGO. IF THE ABI FILER ATTEMPTS TO MOVE THE PAYMENT DUE DATE BEYOND 10 WORKING DAYS FROM THE DATE OF RELEASE, THIS MESSAGE WILL RESULT.

4DK:	NO MATCHING LINE ITEM FOUND

THIS MESSAGE WILL BE PRESENTED WHEN THE ENTRY INFORMATION AS GIVEN TO HEADQUARTERS QUOTA TO CORRECT A RECORD IS INCORRECT. THUS THE COMPUTER CANNOT LOCATE THE LINE TO BE CORRECTED. IN THE FDA INTERFACE, THIS ERROR MESSAGE IS GENERATED WHEN THE FILER ATTEMPTS TO SEND A FDA LINE NUMBER IN A 'CP' APPLICATION (OTHER GOVERNMENT AGENCY CORECTION) THAT DOES NOT EXIST IN THE SELECTIVITY RECORD. THIS DOES NOT MEAN THAT THE LINES DO NOT MATCH, RATHER THE FILER IS SENDING MORE LINES THAN EXIST IN THE SELECTIVITY LINE ITEM RECORD.

834:	ADD INVALID - BROKER REF MISMATCH

IF AN ENTRY SUMMARY RECORD EXISTS AND AN ADD TRANSACTION IS SUBMITTED VIA BATCH ABI INPUT, THE BROKER REFERENCE NUMBER IN THE EXISTING RECORD MUST MATCH THE BROKER REFERENCE NUMBER IN THE '20' RECORD OF THE BATCH ADD TRANSACTION. FILERS MAY CHANGE THEIR FILER REFERENCE NUMBER IF THEY USE ACTION CODE OF "R" (REPLACE) OR "C" (CHANGE) IN LIEU OF "A" (ADD). THIS MESSAGE WILL ALSO RESULT IF THE CARGO DATA INPUT APPLICATION (HI) OR THE BORDER CARGO RELEASE APPLICATION (HN) IS USED AND THE "A" ACTION CODE IS TRANSMITTED WITH A DIFFERENT BROKER REFERENCE NUMBER THAN WAS USED ON THE INITIAL INPUT.

EIS:	LOCATION OR LOC CODED REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 RECORD REPORTS THE LOCATION OF THE INVOICE DELI TERMS. POS 9-10 AND 11-15 MUST BE REPORTED IN COMBINATION TO REPORT A LOCATION CODE IDENTIFIER AND THE LOCATION CODE. IF THESE ARE NOT TRANSMIT THE ACTUAL LOCATION MUST BE TRANSMITTED IN POS 16-50. IF ALL THREE ELEMENTS ARE BLANK IN THE C13 RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE SAME MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

VQK:	CVD PAYABLE AMOUNT INVALID

THIS MESSAGE OCUURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL PAYABLE COUNTERVAILING DUTY IS SENT IN THE D31 RECORD, POSITIONS 48-58. IF SPACES ARE SENT THIS ERROR MESSAGE WILL BE GENERATED.

487:	INVALID REFERENCE NUMBER FORMAT

THE REFERENCE NUMBER IS TRANSMITTED BY THE FILER AND USUALLY REPRESENTS THE FILER'S IRS, OR SSN NUMBER. WHEN A CUSTOMS FORM 4811 HAS BEEN PROCESSED BY LOCAL CUSTOMS, THE AGENT (OWNER OF THE REFERENCE NUMBER) WILL RECEIVE CERTAIN NOTIFICATIONS, LIQUIDATION NOTICES, ETC. FOR THE IMPORTER OF RECORD ON THE ENTRY. THE REFERENCE NUMBER MUST BE TRANSMITTED IN ACCEPTABLE IRS (NN-NNNNNNNNN) OR SSN (NNN-NN-NNNN) FORMAT IN THE 10 REC, POS 32-43. IF THE FORMAT IS NOT CORRECT, THIS ERROR MESSAGE WILL BE GENERATED.

ED0:	SYSTEM PROBLEM - CALL CLIENT REP

THIS "GENERIC" MESSAGE WILL SHOW UP PERIODICALLY, USUALLY WITH DATABASE ERRORS. AS OF JULY 1999, THIS MESSAGE IS BEING ASSIGNED TO ENTRIES IN WHICH THE FILER IS ATTEMPTING TO USE SPI "E" WITH HTS 9802008015 (WHICH IS ELIGIBLE FOR CARIBBEAN BASIN INITIATIVE FILING UNDER SPI "E") WITH A SECOND TARIFF NUMBER THAT IS NOT CBI ELIGIBLE. IN THIS CASE, THE FILER MAY NOT CLAIM "E" FOR THE CUSTOMS LINE IN QUESTION. AS STATED ABOVE, THIS ERROR MESSAGE CAN CHANGE MEANINGS AS DATABASE PROBLEMS WARRANT.

0M9:	INVALID ISO CODE FOR MFG ID

THE TWO CHARACTER ISO CODE USED IN THE MANUFACTURER IDENTIFICATION (MID) FIELD ON SUMMARY OR CARGO RELEASE INPUT TRANSMISSIONS MUST REPRESENT A VALID COUNTRY WHICH IS LISTED ON THE COUNTRY CODE DATABASE. IF THE CODE IS NOT ON THAT DATABASE, THIS ERROR MESSAGE WILL RESULT. THE MID IS TRANSMITTED IN THE SUMMARY INPUT IN REC 60, POS 43-58 AND IN THE CARGO RELEASE INPUT IN REC H5, POS 18-32. IF THE ENTRY INVOLVES A CANADIAN MID, THE ISO CODE MUST BE ONE OF THE 10 CANADIAN PROVINCE CODES (X, FOLLOWED BY AN ALPHA CHARACTER). ERROR MESSAGE AAM WILL BE GENERATED FOR INCORRECT CANADIAN MIDS. FOR AUTOMATED INVOICE (APPL CI), THE RECORDS AFFECTED ARE THE C01 RECORD, THE C08 RECORD, AND THE C11 RECORD.

VEJ:	FC 740:TRADE NAME REQ

AN FCC TRADE NAME OF THE PRODUCT IMPORTED MUST BE SENT IN THE FC01 RECORD, POSITIONS 28-57.

BRY:	POSSIBLE DUTY MISMATCH

R20 ORIGINAL DUTY DOES NOT MATCH PAID / LIQ DUTY THIS MESSAGE IS RETURNED IF THE R20 REC, POS 23-33, AMOUNT DOES NOT EXACTLY AGREE WITH THE PAID DUTY ON THE ENAI RECORD FOR THE IMPORT ENTRY LISTED IN THE R20 RECORD, POS 8-18.THERE CAN BE SEVERAL CAUSES FOR THIS ERROR, BUT THE MOST COMMON ONE IS THAT THE FILER WILL SEND ALL ZEROS IN THE R20 FOR AN IMPORT ENTRY THAT HAD DUTY PAID. ANOTHER POSSIBLE REASON IS WHEN TWO OR MORE COLLECTIONS WERE DEPOSITED ON THE SAME IMPORT ENTRY AND THE FILER HAS NOT KEPT ACCURATE RECORDS REFLECTING THE TOTAL AMOUNT OF DUTY PAID.

EIX:	ALLOWANCE/CHARGE DESCR REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). ALLOWANCE/CHARGE DATA IS TRANSMITTED IN THE C17 AND C18 RECORD. THE FREE-FORM DESCRIPTION OF THE CHARGE DESCRIBED BY THE ALLOWANCE/CHARGE INDICATOR TRANSMITTED IN POS 4 OF THE C17 RECORD IS TRANSMITTED IN THE C18 REC, POS 30-64.THIS FIELD CANNOT BE BLANK. IF NO DATA IS TRANSMITTED IN THIS ELEMENT, THIS ERROR MESSAGE WILL BE GENERATED.

4KM:	SPI F - NON-QUOTA

THE "F" SPECIAL PROGRAM INDICATOR WITH A TEXTILE TARIFF NUMBER AND AN ELIGIBLE COUNTRY OF ORIGIN EXEMPTS THE LINE FROM QUOTA. A FOLKLORE EXEMPTION CERTIFICATE SHOULD BE PRESENTED WITH THE ENTRY. FOR ABI PURPOSES, THIS INDICATOR CAN ONLY BE TRANSMITTED ON A TYPE 02 ENTRY. IF ANY OTHER ENTRY TYPE (EXCEPT 07) IS USED, THIS ERROR MESSAGE WILL RESULT.

99H:	ENTRY/BOND TYPE REQUIRES C/O 'CA'

FOR ENTRY TYPE '23', AND BOND TYPE OF '0' OR SPACE REQUIRES COUNTRY OF ORIGIN OF 'CA'.

 Next 10 >>Showing results 1 to 25 of 1405