ABI Error Message

400:	GSP CLAIM INVALID FOR THIS TARIFF

IF THE FILER TRANSMITS A GSP INDICATOR "A" (50 REC, POS 3, OR 70/80/81 REC, POS 79), FOR A TARIFF NUMBER THAT IS NOT ELIGIBLE FOR GSP, THIS ERROR MESSAGE WILL BE GENERATED.

BRQ:	EARLIEST IMPORT DATE MISMATCH

WHEN THE RECONCILIATION SUMMARY ISSUE CODE ON THE 'RA' TRANSACTION 'R10' RECORD = 'NF', THE EARLIEST IMPORT DATE MUST BE GIVEN AND MUST MATCH THE EARLIEST IMPORT DATE IN ACS OF ANY OF THE ASSOCIATED IMPORTS GIVEN IN THE 'R20' RECORDS.

098:	BROKER INVALID FOR DISTRICT

THE BROKER IS NOT AUTHORIZED TO DO BUSINESS IN THE DISTRICT SPECIFIED.

VIE:	DT HS7: BLANK VIN POSITION: 3

THIS MESSAGE IS GENERATED WHEN AN ENTRY SUMMARY TRANSACTION IS USED TO REPORT DOT DATA VIA ABI. IF THE FILER USES THE DT03 TO REPORT VEHICLE IDENTIFICATION NUMBERS (VIN), THE FIRST THREE VINS BEING REPORTED MUST BE IN POSITIONS 5-21, 22-38, AND 39-55 OF THE DT03 RECORD. IF THE THIRD VIN FIELD IS BLANK AND THE FILER USES POSITIONS 56-72 TO REPORT THE THIRD VIN, THIS ERROR MESSAGE WILL BE GENERATED.

79I:	MANUFACTURER NUMBER NOT ON FILE

THE MANUFACTURER NUMBER USED IN THE ABI SELECTIVITY TRANSACTION DOES NOT EXIST IN THE MANUFACTURER FILE. THIS IS A WARNING MESSAGE ONLY. IT WILL BE FOLLOWED BY THE '42F' "DATA ADDED WITH WARNINGS" MESSAGE.

38P:	WARNING-EXP DATE>FILER ENT DATE

THE EXPORT DATE WAS FOUND TO BE GREATER THAN REVISED FILER ENTRY DATE.

95T:	52 REC - 'CN' SWPM IND INVALID

THE REQUIRED SOLID WOOD PACKING MATERIAL INDICATOR MUST BE '1' OR '2'.

EI3:	UNIT PRICE REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C33 RECORD PROVIDES FOR PRICE DATA FOR THE LINE OF THE INVOICE IN QUESTION. POS 22-36 IS PROVIDED TO REPORT THE UNIT PRICE OF THE ARTICLE BEING REPORTED. THIS FIELD CANNOT BE ZERO (UNLESS THE PAYMENT TERMS IN THE C01 RECORD EQUALS "15" -NO CHARGE) OR THIS ERROR MESSAGE WILL RESULT.

VGZ:	FEI NOT FOUND ON ACS

THIS MESSAGE OCCURS WHEN A FILER QUERIES ABI TO DETERMINE WHETHER AN FDA ESTABLISHMENT NUMBER (FEI) IS ON FILE. ALL TWELVE NUMBERS MUST BE USED INCLUDING LEADING ZEROS. THE FILER USES THE FDPP-10 RECORD SHOWN ON PAGE OGQ-14 OF THE CATAIR WITH A "Q" IN THE ACTION CODE. THIS MESSAGE IS RETURNED WHEN THE FEI NUMBER QUERIED IS NOT FOUND IN ACS. A COMMON REASON IS BECAUSE THE FILER IS NOT QUERYING ALL 12 NUMBERS. THEY SHOULD RESEND THE QUERY USING ALL NUMBERS INCLUDING LEADING ZEROS.

510:	TOTAL ADD DOES NOT MATCH EST.

IF THE TOTAL ANTI-DUMPING DUTY REPORTED ON EACH LINE OF THE SUMMARY IN THE 60 RECORD IS WITHIN $2.99 (PLUS OR MINUS) OF THE CORRECT CALCULATED AMOUNT FOR THE LINE, ABI WILL ACCEPT THE LINE AMOUNT. HOWEVER, IF THE SUMMARY HAS MORE THAN ONE LINE WITH ANTI-DUMPING DUTY DUE, THE GRAND TOTAL OF ALL ANTI-DUMPING DUTY AMOUNTS MUST ALSO BE WITHIN $2.99 (PLUS OR MINUS) OF THE SYSTEM-CALCULATED AMOUNT. EVEN IF THE TOTAL AMOUNT OF ANTI-DUMPING DUTY (90 REC, POS 38-48) IS EQUAL TO THE VARIOUS LINE AMOUNT TOTALS, ABI WILL REJECT THE ENTRY SUMMARY IF THE TOTAL AMOUNT TRANSMITTED IS NOT WITHIN THE STATED TOLERANCE AS COMPARED TO THE CALCULATED TOTAL ANTI-DUMPING DUTY AMOUNT.

VAP:	FIRMS REQUIRED FOR CERTIFICATION

A FACILITIES INFORMATION AND RESOURCES MANAGEMENT SYSTEM (FIRMS) CODE IS IS REQUIRED FOR ANY ENTRY SUMMARY INPUT THAT REQUESTS CARGO CERTIFICATION IN THE 3O REC, POS 38. THE FIRMS CODE IS TRANSMITTED IN THE 20 REC, POS 72-75. IF THE FIRMS CODE IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

B05:	INVALID RECORD TYPE CODE

INPUT RECORD TYPE CODE FIELD CONTAINS A CHARACTER OTHER THAN '1', '2', '3', '4'. IN THE AUTOMATED DRAWBACK MODULE THIS MESSAGE INDICATES THE USE OF A CLAIM TYPE (OR AN ENTRY TYPE) OF OTHER THAN '41', '42', '43', '44', '45' OR '46'.

VOT:	REMOTE ENTRY/ELEC INVOICE REQ'D

IF A REMOTE PROCESSING TRANSACTION IS SENT WITH THE REQUISITE 'B' RECORD REMOTE INFORMATION, ELECTRONIC INVOICE INFORMATION MUST BE SENT. THIS INCLUDES AN 'E' IN THE EI 10 RECORD, POSITION 56 AND A 42 INVOICE RECORD THAT CORRESPONDS TO AN ELECTRONIC INVOICE 'CI' OR A 42 INVOICE RECORD WITH A CORRESPONDING 43 RECORD WITH "INVREQ" IN POSITIONS 3-8.

452:	CHARGES AMOUNT INVALID

IF THERE ARE NO CHARGES, OR CHARGES ARE LESS THAN $ 1 AN "X" WILL BE LISTED AS VALUE OF CHARGES. IN CASE OF OVERLAND SHIPMENTS ARRIVING FROM MEXICO OR CANADA "X" IS ALWAYS SHOWN. IF AGGREGATE CHARGES COVER MERCHANDISE ENTERED UNDER SEVERAL ITEM NUMBERS, AND EXACT BREAKDOWN IS UNKNOWN, CHARGES SHALL BE PRORATED BY VALUE. THE ABOVE DOES NOT APPLY TO ABI TRANSMISSIONS. CHARGES ARE TRANSMITTED IN THE ENTRY SUMMARY INPUT (EI) IN THE 40 REC, POS 48-57. CHARGES ARE REQUIRED FOR ALL MOT'S EXCEPT 60 (HAND-CARRIED) AND FOR ALL ENTRIES EXCEPT INFORMAL ENTRIES. AN AMOUNT OF AT LEAST ONE DOLLAR IS REQUIRED FOR THIS FIELD. ABI WILL NOT ACCEPT "X" FOR CHARGES FOR SHIPMENTS FROM EITHER MEXICO OR CANADA. LINE VALUES LESS THAN $2,000 ($250 FOR SOME TEXTILE PRODUCTS) DO NOT REQUIRE CHARGES TO BE TRANSMITTED.

VHA:	FD 701:AFFRM/COMPLNCE REQ ON FD05

IF THE FILER REPORTS FDA AFFIRMATION OF COMPLIANCE DATA IN THE FD01 RECORD (POS 20-22), AND THERE IS AT LEAST ONE MORE AFFIRMATION OF COMPLIANCE CODE TO REPORT, THE FD05 RECORD MUST BE TRANSMITTED. HOWEVER, THIS RECORD CANNOT BE BLANK. IF THE SECOND OR SUCCEEDING AFFIRMATION OF COMPLIANCE CODES/QUALIFIERS ARE NOT INCLUDED IN THE FD05 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

" 27C:

*CENSUS* OR-LO VAL/QTY(1) TARIFF1

THE UNIT PRICE (VALUE/PRIMARY QUANTITY) IS NOT WITHIN SPECIFIC LIMITS.

VNK:	INVALID IN-BOND FILER CODE

THIS ERROR MESSAGE OCCURS WHEN THERE IS AN INCORRECT "V" NUMBER IN-BOND FILER CODE TRANSMITTED IN THE FIRST THREE POSITIONS OF THE IN BOND NUMBER SENT IN THE EI 22 RECORD, POSITIONS 3-14 OR THE HI HA RECORD, POSITIONS 3-14. THE 'V' NUMBER MUST BE ON THE CARRIER FILE.

J02:	AWB PREFIX NOT ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). THE AIR CARRIER PREFIX IS FOUND ON THE CARL 3/ FILE. IF THE THREE POSITION NUMERIC CODE, TRANSMITTED IN THE HA RECORD IN POS 15-17 (FIRST THREE CHARACTERS OF THE MASTER AIR WAYBILL) IS NOT ON THE CARRIER FILE, THIS ERROR MESSAGE WILL BE GENERATED.

EIQ:	INVALID LOCATION CODE INDICATOR

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 REC, POS 9-10, IS USED TO REPORT ONE OF THREE LOCATION CODE INDICATORS. THE VALID INDICATORS ARE "25" (WHICH INDICATES THE LOCATION CODE IN POS 11-15 WILL BE A CENSUS SCHEDULE K FIVE-NUMERIC FOREIGN PORT OF LADING CODE), "26" (WHICH INDICATES THAT THE CODE IN POS 11-15 WILL A U.S. PORT OF ENTRY FROM CENSUS SCHEDULE D), OR "66" (WHICH INDICATES THAT T LOCATION IN POS 11-15 WILL BE AN ISO COUNTRY CODE). IF ANY OTHER CODE IS USED, THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

564:	LINE MISSING/OUT OF SEQ/INVALID

SUMMARY INPUT CONSISTS OF A SERIES OF RECORDS DESCRIBED IN THE CATAIR. IF ANY REQUIRED RECORDS ARE TRANSMITTED IN THE WRONG ORDER, OR IF REQUIRED RECORDS ARE OMITTED IN THE TRANSMISSION, THIS ERROR MESSAGE WILL RESULT. THIS MESSAGE ALSO APPLIES TO OTHER APPLICATIONS, AS DESCRIBED IN THE CATAIR, FOR WHICH RECORDS ARE TRANSMITTED THAT ARE EITHER OUT OF PROPER SEQUENCE, OR ARE NOT PART OF THE APPLICATION. FOR EXAMPLE, TRANSMITTING THE OGA CORRECTION APPLICATION (CODE CP) WITH FCC DATA WILL CAUSE THIS ERROR MESSAGE. OMITTING THE CARRIER CODE IN THE 01 RECORD FOR A BORDER CARGO RELEASE INPUT (HN) FOR AN AMS PORT WILL GET THIS MESSAGE. MOST OTHER SITUATIONS THAT RESULT IN THIS ERROR ARE FAIRLY STRAIGHTFORWARD AS TO WHICH RECORDS MAY BE MISSING OR SENT IN ERROR. FOR RECON ENTRIES, CHECK EVERY R20 RECORD THAT HAS A FOLLOWING R21 RECORD. THERE MUST BE A TRAILER COUNTER IN POS 78-79 OF THE R20 WHICH SHOWS HOW MANY R21'S ARE BEING INCLUDED FOR THE ENTRY IN THE R20. IF THE R20 SHOWS '01' IN POS 78-79, THERE MUST BE ONLY 1 R21 RECORD, AND SO ON. THE REVERSE IS TRUE, AS WELL: IF NO R21 REC, THE R20 MUST SHOW '00'.

VK4:	HLS: CONST. VALUE FORMAT INVALID

A DISPLAY CONSTANT VALUED MUST BE EXPRESSED AS A 'VALUE' EMBEDDED QUOTES ARE SUPPORTED.

VN9:	LICENSE DDPP NOT FOUND

THIS MESSAGE OCCURS IN THE DRAWBACK MODULE WHEN THE LICENSE DDPP SENT INTO THE PC LICENSE PORT FIELD DOES NOT EXIST IN ACS. FOR RECONCILIATION, THIS MESSAGE OCCURS WHEN THE LICENSE DDPP FOR THE FILER DOES NOT EXIST IN ACS.

95V:	52 REC - 'HK' SWPM IND MISSING

A SOLID WOOD PACKING MATERIAL CERTIFICATE INDICATOR IS REQUIRED FOR ALL LINES WITH A COUNTRY OF ORIGIN OF 'CN' (CHINA) OR 'HK' (HONG KONG) AND AN EXPORT = OR > 12/17/1998.

IN0:	INVALID ENTRY NUMBER

THIS MESSAGE IS GENERATED IN RESPONSE TO A SELECTIVITY RESULTS QUERY INPUT (APPLICATION IN). IF THE ENTRY NUMBER DOES NOT CONTAIN 11 DIGITS, THIS MESSAGE WILL RESULT. SPACES IN EITHER THE FILER CODE OR ENTRY NUMBER ALSO WILL CAUSE THIS REJECT MESSAGE.

AEL:	RLSE ENT #=CONSL ENT #

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION APPLICATION IDENTIFIER EI. IF ANY OF THE ENTRY NUMBERS IDENTIFIED IN THE 32 RECORD ARE IDENTICAL TO THE ENTRY NUMBER IN THE 10 RECORD, THIS MESSAGE WILL BE GENERATED. THE CONSOLIDATED SUMMARY MUST USE AN ENTRY NUMBER THAT IS DIFFERENT FROM ANY OF THE INDIVIDUAL RELEASE ENTRIES LISTED IN THE 32 RECORD.

 Next 10 >>Showing results 1 to 25 of 1405