ABI Error Message

ASO:	ENTRY LIST INCOMPLETE

ENTRY LIST INCOMPLETE.

AAI:	MFR ID OR SHIPPER ID REQUIRED

A MANUFACTURER OR SUPPLIER CODE IDENTIFIES THE MANUFACTURER OR SUPPLIER. REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1986, FOR COMPLETE INSTRUCTIONS ON DETERMINING THE MANUFACTURER/SUPPLIER CODE.

EIS:	LOCATION OR LOC CODED REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 RECORD REPORTS THE LOCATION OF THE INVOICE DELI TERMS. POS 9-10 AND 11-15 MUST BE REPORTED IN COMBINATION TO REPORT A LOCATION CODE IDENTIFIER AND THE LOCATION CODE. IF THESE ARE NOT TRANSMIT THE ACTUAL LOCATION MUST BE TRANSMITTED IN POS 16-50. IF ALL THREE ELEMENTS ARE BLANK IN THE C13 RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE SAME MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

BR3:	RECON DUTY MISMATCH (R20:R90)

THE TOTAL RECONCILED DUTY FROM THE SUM OF ALL 'R20' RECORDS DOES NOT MATCH TOTAL RECONCILED DUTY AS REFLECTED BY THE FILER IN THE RECON'S 'R90' RECORD THIS APPLIES TO ENTRY-BY -ENTRY RECONCILIATION.

VLG:	IMPORT TRAILER # OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE IMPORT TRAILER SEQUENCE NUMBERS ARE OUT OF SEQUENCE IN THE DRAWBACK MODULE. NOTE THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. IF ONLY 1 CONTRACT IS USED ON A CLAIM, THAT CONTRACT NUMBER SHOULD APPEAR IN THE CLAIM HEADER RECORD. THE CONTRACT TRAILER RECORD SHOULD NOT BE USED UNLESS THERE ARE MULTIPLE CONTRACTS ON A CLAIM. THE CONTRACT TRAILER COUNTER IS NOT A COUNT OF CONTRACTS, BUT IS A COUNT OF THE CONTRACT TRAILER RECORDS. IF ONLY ONE CONTRACT IS USED,THE COUNTER SHOULD BE 00, SINCE THERE WILL BE NO TRAILER RECORDS. IF 2 CONTRACTS ARE USED THERE WILL BE ONE CONTRACT TRAILER AND THE COUNT WILL BE 01. THREE CONTRACTS WOULD MEAN TWO TRAILERS AND THE COUNT WOULD BE 02, ETC.. FOR RECONCILIATION, THIS MEANS THAT THE SEQUENCING OF THE IMPORT ENTRY ASSOCIATION RECORDS ('R20') IS OUT OF ORDER.

176:	INVALID FILER CODE

THE THREE CHARACTER FILER CODE MUST BE ALPHA-NUMERIC. NO SPECIAL CHARACTERS AND MUST NOT BE LEFT BLANK.  FILER MUST BE INCLUDED IN THE APPROPRIATE ACS FILE AS A NATIONAL FILER, AND IN THE DISTRICT FILE AS ALLOWED TO FILE ENTRIES IN YOUR DISTRICT. ( ENTRIES FILED AFTER OCTOBER 1, 1986).

VGT:	FD 701: UOM NOT ALLOWED W/O QTY

IN THE FDA INTERFACE A UOM (UNIT OF MEASURE), REC FD02, POS 15-18, 29-32, 43-46I, 57-60, 71-74 AND REC FD04, POS 15-18 IS NOT ACCEPTED UNLESS IT IS TRANSMITTED WITH A QUANTITY. THE REVERSE IS ALSO TRUE, A QUANTITY IS NOT ALLOWED WITHOUT A UNIT OF MEASURE.

40K:	SPI INVALID FOR EXP COUNTRY

SPECIAL PROGRAM INDICATORS, LISTED IN THE CATAIR ON PAGES ENS-48 AND 49 MAY NOT BE VALID FOR ALL PROGRAMS FOR ALL COUNTRIES. FOR EXAMPLE, ECUADOR IS ELIGIBLE FOR THE ANDEAN PREFERENCE PROGRAM (SPI "J"), BUT IS NOT ELIGIBLE FOR THE CARRIBEAN PREFERENCE PROGRAM (SPI "E"). THEREFORE, AN ENTRY SUMMARY INPUT TRANSACTION THAT USED CODE "E" WITH ISO CODE "EC" AS THE COUNTRY OF EXPORT WOULD RECEIVE THIS ERROR MESSAGE.

11R:	3 TARIFF QUOTA LINE CANNOT BE ABI

AN ABI ENTRY WAS ENTERED WITH A QUOTA TARIFF NUMBER ON A LINE THAT CONTAINS MORE THAN 2 TARIFF NUMBERS.

BRJ:	AGGREGATE: ALL AMTS MUST BE ZERO

IF THE RECON IS AN AGGREGATE, ALL MONETARY AMOUNTS ON THE 'R20' IMPORT ENTRY ASSOCIATION RECORDS MUST BE ZERO.

JAF:	NO DATA FOUND FOR KEY

THIS MESSAGE IS A REPLY TO ONE OR MORE ABI QUERIES THAT INDICATES THAT ABI COULD FIND NO RECORDS MATCHING THE FILER'S REQUEST. IT IS USED, AT A MINIMUM, AS A REPLY TO THE FDA PRODUCT CODE QUERY WHEN THE PRODUCT CODE TRANSMITTED BY THE FILER IS NOT FOUND ON THE FDPL DATABASE

VAA:	FC 740:INV IMPORT CONDTN NBR

THE IMPORT CONDITION NUMBER IS SENT IN THE FC01 RECORD, POSITIONS 5-6. A CODE OF 01 - 08 IS SENT IDENTIFYING THE FCC IMPORT CONDITION. ANY OTHER CODES WILL BE REJECTED.  SEE PAGE OGA-25, CATAIR.

630:	INVALID MODE OF TRANSPORTATION

IN ORDER FOR CARGO CERTIFICATION TO BE PERFORMED, THE MODE OF TRANSPORTATION (MOT) FIELD MUST BE COMPLETED. INFORMAL ENTRY SUMMARY TRANSACTIONS (APPLICATION IDENTIFIER EI) WHICH REQUEST CARGO CERTIFICATION, BUT DO NOT PROVIDE THE MOT IN THE 20 REC, POS 28-29, WILL RECEIVE THIS ERROR MESSAGE. SIMILARLY, SEPARATE CARGO RELEASE INPUT TRANSACTIONS (APPLICATION IDENTIFIER HI) WHICH OMIT THE MOT (H1 REC, POS 32-33) WILL ALSO RECEIVE THIS ERROR MESSAGE, WHETHER OR NOT THE RELEASE CERTIFICATION CODE (H1 REC, POS 34) IS ALSO TRANSMITTED. (INFORMAL ENTRY SUMMARY INPUT WHICH DOES NOT REQUEST CARGO CERTIFICATION WILL BE ACCEPTED WITHOUT THE MOT).

VBU:	DT HS7: TIRE CODE/BRAND REQUIRED

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37, THEN THE TIRE MANUFACTURER ID CODE (DT01 RECORD, POSITIONS 38-40) AND THE TIRE MANUFACTURER BRAND NAME (DT01, POSITIONS 41-60) MUST BE SENT.

AAU:	ADD/CVD NOT REQUIRED

ONE OF THE CAUSES OF THIS REJECT IS WHEN A FILER SENDS ANTIDUMPING DUTY IN POSITIONS 33-42 OF THE 60 RECORD WHEN THERE IS A '0' IN THE BOND INDICATOR OF THE CASE DATABASE RECORD.

VNG:	FD 701: UOM INVALID/UNKNOWN

A MAXIMUM OF SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE SENT ON A SINGLE FDA LINE. THE UOM MUST BE ONE OF THE BASE UNITS SHOWN ON PAGE OG-31 OF THE CATAIR OR ONE OF THE VALID FDA CONTAINER CODES SHOWN ON PAGES OG-32-33 OF THE CATAIR. IF ANY OTHER UOM IS TRANSMITTED, EVEN IF IT IS A VALID ONE FOR CUSTOMS PURPOSES, THE ABOVE REJECT WILL BE GENERATED.

VL1:	DBK IMPORT ENTRY DATE INVALID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE DATE GIVEN ON THE DISKETTE WAS NOT A VALID DATE IN YYMMDD (IN Y2K YYYYMMDD) FORMAT. THE ACTUAL DATE OF ENTRY IS NOT VALIDATED.

94P:	UNABLE TO LOCATE BGM SEGMENT

EDIFACT SYNTAX ERROR. THE BGM (BEGINNING OF MESSAGE) SEGMENT IS MISSING.

07H:	EST ARRIVAL DATE NOT IN RANGE

THE ESTIMATED ARRIVAL DATE ENTERED IS NOT WITHIN THE RANGE ALLOWED. VALID DATES INCLUDE: 1) TODAY'S DATE, 2) ANY DATE UP TO 30 DAYS IN THE PAST, 3) ANY DATE UP TO 5 DAYS IN THE FUTURE.

B29:	BRK PERMIT REVOKED - CALL ENT CTL

THE BROKER STATUS IS REVOKED, AND A DATE IS PRESENT. THIS IS A WARNING MESSAGE - IT WILL NOT PREVENT PROCESSING.

BRU:	COMMENTS REQUIRED

COMMENTS ARE REQUIRED IN POSITIONS 5-79 OF THE RECON 'R15' ABI RECORD. POSITION 5 MUST BE > SPACE.

VK5:	HLS:HEX CONSTANT FORMAT INVALID

A HEXADECIMAL CONSTANT VALUE MUST BE EXPRESSED AS X'....' EVEN NUMBERS OF HEXADECIMAL DIGITS 0 THRU 9 A A THRU F ARE REQUIRED.

2H9:	BOND TERMINATED

THE FILER WILL RECEIVE THIS ERROR MESSAGE IF THE BOND FOR THE IMPORTER OF RECORD THEY ARE SENDING HAS A TERMINATION DATE IN THE BOND FILE EQUAL TO OR LATER THAN THE DATE OF ENTRY SENT BY THE FILER AS DETERMINED BY THE ENTRY DATE HIERARCHY. THE FILER MAY BE GETTING THIS REJECT BECAUSE THEY ARE NOT SENDING AN ESTIMATED DATE OF ENTRY AND THE EDIT IS BEING DONE AGAINST THE STATEMENT DATE. IF THE TRUE DATE OF ENTRY IS BEFORE THE BOND TERMINATION DATE THE FILER MAY RETRANSMIT THE TRANSACTION WITH AN ESTIMATED ENTRY DATE. THE BOND MUST BE RENEWED FOR FUTURE IMPORTATIONS.

20T:	ADDRESS REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C10 AND C60 RECORDS PROVIDE SPACE TO REPORT THE SECOND LINE OF THE ADDRESS FOR THE PARTY IDENTIFIED IN THE C08 OR C58 RECORD (IF THERE IS MORE ADDRESS INFORMATION THAN CAN BE REPORTED ON THE C09 RECORD). IF THE C10 OR C60 RECORD IS TRANSMITTED WITH BLANKS IN THE SECOND-LINE-OF-ADDRESS FIELD, THIS ERROR MESSAGE WILL BE GENERATED.

77H:	NO ULT CONS RECORD FOR ENTRY

NO ULTIMATE CONSIGNEE WAS TRANSMITTED WITH THE ENTRY (EITHER HN OR HI). WHEN ACS CHECKED THE ULTIMATE CONSIGNEE (UC) NAME AND ADDRESS FILE FOR THE ENTRY NUMBER, (OR ENTRY AND LINE NUMBER IF THERE WERE MULTIPLE UC'S) NONE WAS FOUND. THERE ARE TWO POSSIBLE RESOLUTIONS. THE FIRST IS FOR THE FILER TO TRANSMIT A VALID REGULAR OR ENCRYPTED UC NUMBER IN THE ENTRY ITSELF. THE SECOND IS FOR THE FILER TO TRANSMIT THE UC NAME AND ADDRESS (IJ) RECORD THAT REFERENCES THE ENTRY (AND LINE NUMBER IF APPROPRIATE). AFTER RECEIVING THE "DATA ADDED AS REQUESTED" REPLY, THE FILER SHOULD RE-TRANSMIT THE ENTRY.

 Next 10 >>Showing results 1 to 25 of 1405