ABI Error Message

VAL:	FW 3-177: LICENSE NOT ON FILE

THE LICENSE NUMBER WHICH IS TRANSMITTED IN THE FW02 RECORD, POS 45-50 MUST BE RESIDENT IN THE FWL FILE. THE LICENSE NUMBER IS ISSUED BY FSW TO IMPORTERS IMPORT OVER $25,000 ANNUALLY OF MERCHANDISE THAT IS SUBJECT TO FWS. CUSTOMS DOES NOT TRACK CUMULATIVE VALUES. THIS IS THE RESPONSIBILITY OF FWS. FWS UP- LOADS THE U.S. LICENSE INFORMATION TO ACS ONCE A WEEK. IF A FILER HAS BEEN ASSIGNED A U.S. LICENSE NUMBER AND ATTEMPTS TO TRANSMIT IT PRIOR TO THE UPLOAD, THEY SHOULD BE REFERRED TO THE LOCAL FWS OFFICE FOR INSTRUCTIONS ON CLEARING MERCHANDISE UNTIL THE LICENSE IS RESIDENT IN OUR DATA BASE. THERE ARE NO EDITS TO REQUIRE THE USER TO TRANSMIT THE LICENSE NUMBER, BUT IF A LICENSE NUMBER IS TRANSMITTED, THERE MUST BE AN EXACT MATCH WITH ONE OF THE LICENSE NUMBERS IN THE FWL FILE.

VHW:	DT HS7: NHTSA REG IMP NBR REQ'D

IF BOX 03 IS REFLECTED IN THE DT01 REC, POS 8-9, THIS ELEMENT IN POS 56-63 OF THE DT02 RECORD IS REQUIRED.

AFR:	STMT BRANCH/BROKER MISMATCH

THIS MESSAGE OCCCURS WHEN A FILER SENDS A STATEMENT BRANCH CODE IN POSITIONS 49-50 OF THE EI 20 RECORD ALONG WITH A STATEMENT INDICATOR AND STATEMENT DATE BUT THE BRANCH CODE HAS NOT BEEN SET TO OPERATIONAL IN THE ABE FILE. ALSO, IF THE FILER HAS BEEN SET TO 'Y' FOR BRANCH ON THE ABI RPOFILE RECORD, BUT THEN NEGLECTS TO INCLUDE A BRANCH DESIGNATION IN THE 20 RECORD (POS 49-50), THIS MESSAGE WILL OCCUR. IN A RECONILIATION ENTRY, THE R17 REC, POS 11-12, MUST REFLECT A CLIENT BRANCH DESIGNATION IF THE ABEI RECORD IS SET TO 'Y' FOR THIS FEATURE. THIS MESSAGE WILL ALSO OCCUR IF THE FILER USES THE 'STATEMENT ADD/DELTE' APPLICATION (HP) AND SENDS BRANCH DESIGNATION IN POS 25-26.

28N:	*CENSUS* IMPROBABLE MFR/SHPER ID

AN ENTRY WITH A COUNTRY OF ORIGIN OR COUNTRY OF EXPORT OF 'CA' IS ENTERED AND THE FIRST TWO BYTES OF THE MANUFACTURER IS OTHER THAN 'XA" 'XC' 'XM' 'XB' 'XW' 'XN' 'XO' 'XP' 'XQ' 'XS'.

746:	LINE ITEM VALUE MISSING

THIS MESSAGE OCCURS WHEN ZEROES OR SPACES ARE SENT FOR THE VALUE IN POSITIONS 8-17 OF THE 40 RECORD OR POSITIONS 69-78 OF THE 70, 80 OR 81 RECORDS IN A "9802" TRANSMISSION. IN OTHER TYPES OF TRANSMISSIONS, SENDING SPACES OR ZEROES WILL YIELD AN 800 ERROR MESSAGE "NO MATCH FOR ESTIMATED COMP DUTIES" OR IN THE CASE OF GSP OR LDDC, A WARNING MESSAGE 28E "CENSUS OR-LO VALUE/QUANTITY."

94L:	EXPECTED UNA/UNB SEGMENT NOT FND

EDIFACT SYNTAX ERROR. THE UNA/UNB (INTERCHANGE HEADER) SEGMENTS ARE MISSING.

EIW:	CURRENCY/EXCH RATE INCONSISTENT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). CURRENCY AND EXCHANGE RATE DATA IS TRANSMITTED IN THE C01 RECORD. THE CURRENCY CODE IS TRANSMITTED IN POS 45-47. IF THIS CODE IS "USD", THEN THE FIXED EXCHANGE RATE INDICATOR (POS 48) MUST BE BLANK AND THE RATE OF EXCHANGE (POS 49-55) MUST BE ZEROS. IF THE CURRENCY CODE IS OTHER THAN "USD", THEN THE FIXED EXCHANGE RATE INDICATOR MUST BE EITHER "1" (FOR A FIXED RATE PROVIDED BY THE TRANSMITTER) OR "0" (WHICH INDICATES THAT THE CURRENCY RATE IS NOT FIXED AND WILL COME FROM THE RATE IN EFFECT ON THE DATE OF THE INVOICE) WILL BE USED TO COVNERT THE REPORTED VALUES TO U.S. DOLLARS. NOTE: THIS MESSAGE ALSO APPLIES TO THE C18 RECORD.

48A:	CONSIGNEE IS FOREIGN BASED

THIS IS A WARNING MESSAGE THAT OCCURS WHEN A FILER SENDS A FOREIGN BASED CONSIGNEE IN A SELECTIVITY TRANSACTION. IT WARNS THE FILER THAT THE ADDRESS FOR THE CONSIGNEE NUMBER IS NOT A U.S. ADDRESS. IN THE FDA INTERFACE THE FDA'S SYSTEM WILL AUTOMATICALLY REJECT THIS TYPE OF CONSIGNEE AND SEND A 'DT' REJECT BACK TO THE FILER. THE FILER MUST THEN OBTAIN A FDA ESTABLISHMENT IDENTIFIER NUMBER (FEI) FROM FDA THROUGH ABI AND SEND THAT NUMBER IN AN OTHER GOVERNMENT AGENCY CORRECTION TRANSACTION (CP). THIS MESSAGE IS FOLLOWED BY THE INFORMATIONAL MESSAGE 42F "DATA ADDED WITH WARNINGS".

4KI:	GUAM VISA: ENTRY MUST BE NON-ABI

IF COUNTRY OF ORIGIN IS GUAM AND VISA NUMBER INDICATES GUAM, THE ENTRY MUST NON-ABI.

299:	INVALID INFORMAL ENTRY NUMBER

INVALID EIGHT DIGIT ENTRY NUMBER FOR INFORMAL COLLECTION.

8N6:	ALLOWABLE DUTY/TAX IS ZERO

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE PAID OR LIQUIDATED AMOUNT FOR THE IMPORT ENTRY WAS ZERO AND THAT THE IMPORT IS NOT ELIGIBLE FOR THE DRAWBACK CLAIM.

EJN:	ID NUMBER (B) REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C37 RECORD PROVIDES SPACE FOR TWO IDENTIFICATION NUMBERS. THE SECOND (IDENTIFIER B) IS REPORTED IN POS 45-79.IF ONE OF THE FOUR VALID ID NUMBER QUALIFIERS (SEE PAGE AII-34) IS REPORTED IN POS 42-44 OF THE C37 RECORD, THERE MUST BE DATA IN POS 45-79 (THE DATAMUST BE LEFT JUSTIFIED STARTING IN POSITION 45 BUT DOES NOT HAVE TO OCCUPY THE ENTIRE FIELD). IF THE FIELD IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED. **NOTE** - AS OF APRIL 1998, ONLY THE ID NUMBER QUALIFIER "VIN" IN POS 42-44 WILL RESULT IN THIS MESSAGE IF THE ID NUMBER FIELD IS LEFT BLANK.

AP2:	HEADER/DETAIL DATA REQUIRED

ONE OR MORE REQUIRED RECORDS IS MISSING. A P10 IS REQUIRED FOR INITIAL, AMENDMENT, ADDENDA, AND SERVICE REQUESTS. THE P11 IS REQUIRED FOR INITIAL FILING. THE P11 SHOULD BE USED AS PART OF THE AMENDMENT OR ADDENDA ONLY TO CHANGE A 'N' (NO) SAMPLE AND/OR 'N' (NO) HARDCOPY INDICATOR TO 'S' (SENT). THE P15 RECORD IS REQUIRED FOR INITIAL FILING. THE P16 RECORD IS REQUIRED WHEN FURTHER REVIEW IS REQUESTED IN THE ACCOMPANYING P10 OF THE INITIAL FILING OR AMENDMENT TRANSACTION.

VLT:	TOT DRAWBACK DUTY AMOUNT INVALID

THE TOTAL AMOUNT OF DRAWBACK DUTY CLAIMED IN REC 90, POS 4-15 DOES NOT REFLECT THE SUM TOTAL OF DRAWBACK DUTY CLAIMED IN RECS D30, POS 30-41 AND RD40, POS 20-31.

AID:	CASE TERMINATED

THE CASE (ANTIDUMPING OR COUNTERVAILING) REPORTED BY THE ABI FILER IN AN ENTRY SUMMARY TRANSACTION (APPLICATION IDENTIFIER EI) IS A TERMINATED CASE NUMBER. CASE NUMBERS ARE REPORTED IN THE 60 REC, POS 13-22 FOR CVD CASES AND POS 23-32 FOR ADA CASES.

VPQ:	EXPORT DT MUST BE > 12/31/95

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN THE D01 RECORD, POSITIONS 22-27. IN THIS MODULE THE EXPORT DATE MUST BE GREATER THAN DECEMBER 31, 1995.

400:	GSP CLAIM INVALID FOR THIS TARIFF

IF THE FILER TRANSMITS A GSP INDICATOR "A" (50 REC, POS 3, OR 70/80/81 REC, POS 79), FOR A TARIFF NUMBER THAT IS NOT ELIGIBLE FOR GSP, THIS ERROR MESSAGE WILL BE GENERATED.

46H:	SINGLE PAY REJ FOR WHSE WTHDR

AUTOMATED WAREHOUSE WITHDRAWAL TYPES 31, 32, 34 AND 38 MUST BE PAID VIA ABI STATEMENT PROCESSING. SEE ADMINISTRATIVE MESSAGE 94-0197.

VLQ:	DRAWBACK EXPORT SUMM IND INVALID

THIS MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' (YES) OR 'N' (NO) FOR WHETHER THIS IS AN EXPORT SUMMARY CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR A SPACE (NO) OR '1' (YES) FOR ABI. APPLIES TO DRAWBACK MODULE.

8WW:	MASTER BL/AWB NUMBER REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE L3 RECORD IS TRANSMITTED, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER, THE MANIFESTED QUANTITY AND THE MANIFESTED UNIT OF MEASURE ARE REQUIRED. OTHER ELEMENTS ON THE L3 RECORD ARE OPTIONAL. IF ONE OR MORE OF THE REQUIRED ELEMENTS ARE NOT PRESENT IN THE L3 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

95E:	ENTRY NOT ELIGIBLE FOR RECONCILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). ONLY THREE ENTRY TYPES ARE ELIGIBLE FOR THE RECONCILIATION PROTOTYPE AS OF OCT 1998. THE THREE TYPES ARE "01", "02", AND "06". IF ANY OTHER ENTRY TYPE IS TRANSMITTED IN THE 10 REC, POS 71-72, THIS ERROR MESSAGE WILL RESULT.

ARP:	NOTIFY SUB ALREADY ON FILE

THE ID NUMBER OF THE SUBSTITUTE IS ALREADY ON THE PROTEST RECORD MAKING IT A DUPLICATE, OR THE FILER NEEDS TO CHECK THAT THE APPROPRIATE ACTION CODE IS BEING USED: "A" = ADD, "R" = REPLACE.

46G:	MISSING PAYMENT DUE DATE

PAYMENT DUE DATE

VO1:	DT HS7: FORM REQUIRED

IMPORTED PRODUCTS SUBJECT TO REVIEW BY THE DEPARTMENT OF TRANSPORTATION ARE CODED DT1 OR DT2 ON THE HARMONIZED TARIFF DATABASE. IF THE CODING IS DT2, THE FILER IS REQUIRED TO REPORT DOT INFORMATION FOR THE TARIFF NUMBER. IF NO DATA IS TRANSMITTED, THE ABOVE ERROR MESSAGE WILL RESULT.

79I:	MANUFACTURER NUMBER NOT ON FILE

THE MANUFACTURER NUMBER USED IN THE ABI SELECTIVITY TRANSACTION DOES NOT EXIST IN THE MANUFACTURER FILE. THIS IS A WARNING MESSAGE ONLY. IT WILL BE FOLLOWED BY THE '42F' "DATA ADDED WITH WARNINGS" MESSAGE.

 Next 10 >>Showing results 1 to 25 of 1405