ABI Error Message

VIA:	DT HS7: VIN LIST DUP POSITION: 3

THIS MESSAGE IS GENERATED WHEN FILERS TRANSMIT DOT INFORMATION IN THE DT03 RECORD. THIS RECORD PROVIDES FOR UP TO FOUR INSTANCES OF THE VIN (VEHICLE IDENTIFICATION NUMBER). IF FEWER THAN FOUR RECORDS ARE TRANSMITTED, THE RECORDS MUST BE COMPLETED USING THE FIRST FIELD (POS 5-21), THEN THE SECOND (POS 22-38), ETC. IF POSITION 3 IS LEFT BLANK, BUT A VIN IS TRANSMITTED IN POSITION 4, THIS ERROR MESSAGE WILL RESULT. NOTE: THIS MESSAGE IS ONLY APPLICABLE WHEN THE DOT DATA IS TRANSMITTED AS PART OF AN ENTRY SUMMARY BEING CERTIFIED FOR CARGO RELEASE (APPLICATION ID IS EI). IF EITHER HN (BORDER CARGO RELEASE) OR HI (CARGO RELEASE) IS USED TO REPORT DOT DATA, ERROR MESSAGE VH6 WILL BE GENERATED.

AAX:	RATE ACCEPTED-DUTY NOT CALCULATED

THIS MESSAGE WILL RESULT FOR CERTAIN ANTI-DUMPING OR COUNTERVAILING DUTY CASES WHICH ARE SUBJECT TO A SPECIFIC ANTI-DUMPING OR COUNTERVAILING DUTY RATE AS OPPOSED TO AN 'AD VALOREM' RATE. THIS IS A WARNING MESSAGE AND MERELY INFORMS THE FILER THAT THE AMOUNT OF DUTY BEING TRANSMITTED IS NOT BEING VERIFIED BY ABI.

VGM:	FD 701: QTY IND;PREV QTY=0'S

UP TO SIX QUANTITIES CAN BE SENT IN THE FDA INTERFACE. IF ZEROS WERE TRANSMITTED IN A PRECEDING QUANTITY BLOCK AND A QUANTITY WAS TRANSMITTED IN THE INSTANT BLOCK, THIS ERROR MESSAGE RESULTS. FOR INSTANCE, IF ZEROS ARE TRANSMITTED IN THE UNIT 1 QUANTITY BLOCK OF REC FD02, POS 5-14 AND 0000000009 TRANSMITTED IN THE UNIT 2 QUANTITY BLOCK OF REC FD02, POS 19-28, THIS ERROR MESSAGE OCCURS.

DKZ:	TARIFF NOT ONFILE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THE MESSAGE SIMPLY MEANS THAT THE NUMBER, AT THE 6, 8, OR 10 DIGIT LEVEL DOES NOT EXIST ON THE TARIFF FILE. NORMALLY, THIS OCCURS WHEN THE FILER HAS GIVEN 10 DIGITS ON OLDER RECORDS. FOR OLDER RECORDS, IF THE FILER USES 6 DIGITS (OR 8 IF PETROLEUM) THE PROBLEM IS MINIMIZED.

EJM:	INVOICE ADDITIONAL AMOUNT WRONG

THIS MESSAGE IS GENERATED IN RESPONE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C84 REC, POS 19-33, IS USED TO REPORT ANY ALLOWANCE OR CHARGES THAT SHOULD BE ADDED TO THE INVOICE AMOUNT TO REFLECT THE PROPER INVOICE TOTALS. THE C17 REC PROVIDES SIX TYPES OF ADJUSTMENTS (SEE PAGE AII-23 FOR THE VALID ALLOWANCE/CHARGE INDICATORS). IF ANY OF THESE TYPES EXCEPT "N" OR "D" ARE USED, THE AMOUNTS OF THESE ADJUSTMENTS, WHETHER ADDITIONS OR SUBTRACTIONS TO THE DUTIABLE TOTAL AMOUNT, ARE TRANSMITTED IN THE C18 RECORD. THE TOTAL OF THESE UPS OR DOWNS ARE TRANSMITTED IN THE C84 RECORD IN POS 19-33. IF THE TOTAL ADJUSTMENTS IS A NEGATIVE NUMBER, POS 34 OF THE C84 RECORD MUST BE AN "N". **NOTE** - THIS IS A HEADER LEVEL MESSAGE. IF ADJUSTMENTS ARE MADE AT THE INVOICE LINE LEVEL, THOSE TOTALS ARE NOT CARRIED FORWARD TO THE C84 RECORD.

VME:	WHSE PERIOD EXPIRED

THE ENTRY DATE ON A WAREHOUSE WITHDRAWAL WAS MORE THAN FIVE YEARS FROM THE IMPORT DATE OF THE ORIGINAL WAREHOUSE ENTRY SUMMARY.

BRS:	R10 FIELDS MUST MATCH FILED ENTRY

THIS MESSAGE CAN OCCUR IF THE RECONCILIATION SUMMARY IS ALREADY FILED AND THE FILER IS DOING A REPLACEMENT OR CORRECTION. VIRTUALLY ALL FIELDS IN THE NEW 'R10' MUST MATCH WHAT IS ALREADY ON FILE. THE MAIN REASON FOR THIS REJECT IS THE ABSENCE OF A '00' SUFFIX IN THE IMPORTER OF RECORD NUMBER IN THE R10 REC, POS 20-31. EVEN IF THE ORIGINAL TRANSMISSION DID NOT CONTAIN THE SUFFIX, ONCE IT HAS BEEN ACCEPTED ERROR-FREE, THE ENAI RECORD SUPPLIES THE ZEROS AND MAKES THEM MANDATORY WHEN A RETRANSMISSION IS DONE. NOTE THAT THE R10 RECORD LISTS TWO FIELDS WHERE THIS ERROR CAN OCCUR: THE IMPORTER ID MENTIONED ABOVE IN POS 20-31 AND THE 4811 REFERENCE NUMBER IN POS 60-71. BOTH FIELDS MUST HAVE A SUFFIX IN ORDER TO PROCESS THE RECON ENTRY. A SECOND REASON FOR THIS REJECTION MESSAGE RELATES TO THE RECON TEAM, IN POS 41-43 OF THE R10. IF THE PORT HAS CHANGED THE ASSIGNED TEAM ON THE ENAI RECORD FOR THE PREVIOUSLY TRANSMITTED 09 ENTRY, IT MUST BE CHANGED BACK TO THE APPROPRIATE RECON TEAM NUMBER BEFORE THE FILER CAN RETRANSMIT THE ENTRY.

EJH:	SIGNATURE INDICATOR MUST BE 'X'

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C95 REC, POS 39, MUST REFLECT AN "X" TO INDICATE THE SIGNATURE FOLLOWS. NO OTHER CHARACTER, INCLUDING A BLANK, MAY BE TRANSMIT IN THIS POSITION.

VEZ:	ISIS INPUT BYPASSED/PREV ERRORS

THIS ERROR OCCURS IN THE LINK BETWEEN CUSTOMS ACS AND FDA'S OASIS SYSTEM WHEN FDA ATTEMPTS TO RESEND PROCESING INFORMATION THAT HAS BEEN PREVIOUSLY RECEIVED BY ACS. THE ERROR MESSAGE IS NOT PASSED ON TO THE FILER AND DOES NOT AFFECT THE FDA DATA RECORD.

ARN:	PROTESTANT DATA INCOMPLETE

PROTESTANT DATA IS INCOMPLETE.

VPP:	EXPORT DT CANNOT BE > SYS DATE +2

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN POSITIONS 22-27 OF THE D01 RECORD AND CANNOT BE MORE THAN 2 DAYS IN ADVANCE OF THE SYSTEM DATE.

95S:	52 REC - 'CN' SWPM IND MISSING

A SOLID WOOD PACKING MATERIAL CERTIFICATE INDICATOR IS REQUIRED FOR ALL LINES WITH A COUNTRY OF ORIGIN OF 'CN' (CHINA) OR 'HK' (HONG KONG) AND AN EXPORT = OR > 12/17/1998.

104:	CUSTOMS PROCESSED SUM ON FILE

THIS MESSAGE IS GENERATED DURING BORDER CARGO RELEASE (HN) TRANSACTIONS. THE ENTRY MAY BE MODIFIED UP UNTIL THE TIME OF SUCCESSFUL ON LINE CUSTOMS PROCESSING. IF THE ENTRY SUMMARY HAS BEEN ACCEPTED AND IS ON FILE WITH CUSTOMS THIS MESSAGE WILL GENERATE. THIS MESSAGE ALSO APPLIES IF THE FILER ATTEMPTS TO OBTAIN CARGO SELECTIVITY FROM EITHER THE HI APPLICATION OR FROM A RETRANSMISSION OF THE ENTRY SUMMARY IN A NON-BORDER LOCATION.

808:	INVALID CROSS DISTRICT

FOR ABI PURPOSES, THE ABOVE MEANS THAT THE FILER'S 'B' RECORD PORT OF PROCESS IN POS 4-7 DOES NOT AGREE WITH THE PORT OF ENTRY IN THE H1 RECORD (POS 4-7). THE DISTRICT CODES (POS 4-5) MUST BE THE SAME BETWEEN THE B RECORD AND THE PORT OF ENTRY IN THE APPLICATION.

APY:	FAX SENT DATE INVALID

THE CCYYMMDD THAT A FACSIMILE WAS SENT TO CUSTOMS IS REQUIRED AT INITIAL PROTEST, CLAIM AND INTERVENTION FILING WHEN THE VALUE SUBMITTED IN THE FAX INDICATOR IS 'S'. THE VALUE SUBMITTED IN FAX SENT DATE IS NOT A VALID DATE IN CCYYMMDD FORMAT.

APG:	SIGNATURE CERT. INVALID

CERTIFICATION OF SIGNATURE, SIGNIFIED BY AN "X", IS REQUIRED IN LIEU OF A SIGNATURE IN THE AUTOMATED ENVIRONMENT.

386:	GSP COUNTRY EXP/ORIG CONFLICT

THE COUNTRY OF ORIGIN (40 RECORD, POS 6-7) AND THE EXPORT COUNTRY (50 REC, POS 69-70) MUST BE THE SAME AND MUST BOTH BE GSP ELIGIBLE TO CLAIM A DUTY EXEMPTION UNDER SPI "A" (REC 50, POS 3). IF THE COUNTRY OF EXPORT IS A MEMBER OF AN ASSOCIATION OF COUNTRIES (ASEAN, FOR EXAMPLE), THE COUNTRY OF EXPORT MAY DIFFER FROM THE COUNTRY OF ORIGIN WITHOUT VIOLATING THE GSP PROVISIONS.

ACY:	IMPORTER NUMBER ALREADY ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ABI 5106 INPUT TRANSACTION (APPLICATION TI). IF THE IDENTIFICATION NUMBER (EIN, SSN, OR USCS ASSIGNED NUMBER) IS ALREADY ON FILE IN THE 5106 DATABASE, THIS MESSAGE WILL BE GENERATED TO THE FILER. NOTE: AS OF MAY 1998, THE ERROR MESSAGE NARRATIVE IS NOT BEING ACCOMPANIED BY THE IDENTIFICATION NUMBER "ACY".

APP:	ACCEL. DISP. REQ. NOT APPLIC

A REQUEST FOR ACCELERATED DISPOSITION, INDICATED BY 'R', MAY BE SUBMITTED FOR TYPE 514 PROTESTS WHEN 90 DAYS FROM INITIAL FILING HAS ELAPSED AND NO CUSTOMS DECISION HAS BEEN RENDERED. EITHER THE FILING IS NOT A TYPE 514 PROTEST, THE 90 DAYS HAS NOT ELAPSED, OR A CUSTOMS DECISION HAS BEEN RENDERED.

94M:	EXPECTED UNB SEGMENT NOT FND

EDIFACT SYNTAX ERROR. THE UNB (INTERCHANGE HEADER) SEGMENT IS MISSING.

VID:	DT HS7: BLANK VIN POSITION: 2

THIS MESSAGE IS GENERATED WHEN AN ENTRY SUMMARY TRANSACTION IS USED TO REPORT DOT DATA VIA ABI. IF THE FILER USES THE DT03 TO REPORT VEHICLE IDENTIFICATION NUMBERS (VIN), THE FIRST TWO VINS BEING REPORTED MUST BE IN POSITIONS 5-21 AND 22-38 OF THE DT03 RECORD. IF THE SECOND VIN FIELD IS BLANK AND THE FILER USES POSITIONS 39-55 TO REPORT THE SECOND VIN, THIS ERROR MESSAGE WILL BE GENERATED.

228:	INVALID DAY FOR BEGINNING DATE

DAY OF BEGINNING EFFECTIVE DATE UPDATE IS INVALID

VKY:	HLT;POS REQUIRED W/ OPTIONAL LEN

A POSITION VALUE MUST BE SPECIFIED FOR THE OPTIONAL POSITION/LENGTH PARAMETER WHEN A LENGTH IS SPECIFIED.

EJY:	UNIT OF MEASURE REQUIRED

IF THE FILER SENDS A QUANTITY IN THE SUMMARY INPUT (EI APPLICATION, REC 22, POS 51-58) AND DOES NOT ALSO INCLUDE A UNIT OF MEASURE (REC 22, POS 51-58) THIS ERROR MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE CARGO RELEASE INPUT (HI APPLICATION, REC HA, POS 51-58 FOR THE UNIT OF MEASURE). IN THE AUTOMATED INVOICE TRANSACTION (APPLICATION CI), THIS ERROR MESSAGE IS SOMEWHAT MISLEADING. IF THE C34 RECORD IS TRANSMITTED, THE FIRST QUANTITY FIELD, POS 4-18, MUST BE GREATER THAN ZERO. THE FIRST UNIT OF MEASURE IN POS 19-21 IS OPTIONAL. IF THE SECOND UNIT OF MEASURE, POS 37-39, IS TRANSMITTED WITHOUT A SECOND QUANTITY IN POS 22-26, THIS ERROR MESSAGE IS GENERATED. A BETTER MESSAGE WOULD BE "UOM NOT ALLOWED WITH QUANTITY."

EJ8:	TRANSACTION REJECTED-EXAM PENDING

IN ABI CI, IF SSA01-SELECTIVITY-TYP EQUALS '4' '5' OR '7', AN ASSOCIATED NVOICE CANNOT BE REPLACED OR DELETED. THE ABOVE MESSAGE MEANS THAT THE FILER HAS TRANSMITTED AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI) FOR AN ENTRY THAT IS CURRENTLY IN SOME FORM OF EXAMINATION STATUS. WHILE THE EXAMINATION STATUS ATTACHES TO THE ENTRY ASSOCIATED WITH THE INVOICE IN QUESTION, A RETRANSMISSION OF THE INVOICE DATA IS NOT PERMITTED.

 Next 10 >>Showing results 1 to 25 of 1405