ABI Error Message

AR2:	NOTIFY SUB DATA NOT APPLICABLE

NOTIFY SUBSTITUTE TYPE NOT APPLICABLE.

VNI:	FD 701: MLTPLE BASE UNITS INVALID

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 92-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT, THE BASE UNIT MUST BE IN THE LAST POSITION. THE FILER CANNOT SEND MORE THAN ONE BASE UNIT. BASE UNITS ARE LOCATED IN THE CATAIR, PAGE OGA-31. TO SOLVE THIS ERROR, THE FILER MUST USE THE BASE UNIT AND A CONTAINER CODE (S) FOUND ON PAGES OGA 32-33, CATAIR.

VC6:	FW 3-177: VALUE MUST BE >0

IN THE FISH & WILDLIFE INTERFACE THE FWS VALUE (FW01 RECORD, POSITIONS 63-72) IS A MANDATORY RECORD. THIS ERROR MESSAGE WILL OCCUR IF THE DATA ELEMENT CONTAINS ALL ZEROES OR BLANKS.

ST3:	LAST SET ON ENTRY IS INCOMPLETE

AN INCOMPLETE SET WAS CLOSED OUT IN THIS ENTRY FOR ABI REVIEW PURPOSES, THIS MESSAGE WILL USUALLY BE ACCOMPANIED BY ERROR MESSAGE ST1, PREVIOUS SET IS INCOMPLETE. ERROR MESSAGE ST3 INDICATES THAT THE LAST REPORTED SET DOES NOT HAVE AT LEAST TWO SUBSEQUENT 40 RECORDS WITH "V" INDICATORS SHOWN IN POS 80 OF THE 50 RECORD. THE FIRST 'V' LINE MUST REFLECT THE SAME HTS NUMBER AS IN THE 'X' AND AT LEAST ONE MORE 'V' LINE MUST BE PRESENT WITH A DIFFERENT HARMONIZED NUMBER.

4BB:	SELECTIVITY ALREADY PERFORMED

SELECTIVITY IS PROCESSED IN ABI PRIOR TO ONLINE PROCESSING IF THE ARRIVAL DATE OF THE ENTRY IS LESS THAN 6 DAYS IN THE FUTURE. ONCE SELECTIVITY HAS BEEN PERFORMED, EVEN THOUGH THE ENTRY MAY BE IN ABI STATUS, A REPLACEMENT OF THE ENTRY BY THE BROKER THROUGH ABI IS NOT ALLOWED.

VK6:	HLS: BMS MAP FIELD NAME REQUIRED

A BMS MAP FIELD NAME OPERAND IS REQUIRED WITH OPERAND 'M'

064:	DUTY AMOUNT MUST EQUAL ZEROS

IF CLASS CODE = 020 OR 021 ANOTHER CLASS CODE, (001 OR 002) MUST BE PRESENT. WHEN THIS IS THE CASE THE DETAIL AMOUNT FOR 001 OR 002 MUST BE BLANK OR ZERO. IN AN ABI SUMMARY TRANSACTION, IF A SPECIAL PROGRAM THAT YIELDS ZERO DUTY IS USED, THE 50 RECORD MUST SHOW ZERO IN POS 14-23.

ASG:	NO MATCH FOR ENTRY

A MATCH FOR THE ENTRY CITED MUST BE FOUND ON THE USCS ENTRY DATABASE, OTHER IT WILL BE REJECTED. THE FORMAT IS TO STRING THE FILER CODE AND ENTRY NUMBER TOGETHER - NO DASH IS USED BETWEEN FILER AND ENTRY NUMBER OR CHECK DIGIT.

VMO:	WHSE FINALLED; WITHDRAWAL INVALID

THE WAREHOUSE SUMMARY CITED ON AN EI'S 30 REC INDICATES THE FINAL WITHDRAWAL HAS ALREADY BEEN PROCESSED AGAINST IT.

EIY:	INVALID RELATE DOCUMENT ID

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C19 RECORD IS USED TO REPORT THE PRESENCE OF DOCUMENTS THAT MAY RELATE TO THE INVOICE IN QUESTION. IF THE C19 RECORD IS USED, POS 4-6 MUST REFLECT ONE OF THE ACCEPTABLE VALUES FOR THE RELATED DOCUMENT IDENTIFIER. THESE IDENTIFIERS ARE LISTED IN APPENDIX B TO THE CATAIR. THE USE OF ANY INDICATOR NOT LISTED IN APPENDIX B WILL GENERATE THIS ERROR MESSAGE.

632:	AMOUNT CANNOT EXCEED 9-DIGITS

TAX, DUTY, CVD OR ADD AMOUNT IS TOO LARGE

VMW:	WHSE WITHDRAWAL ON FILE

WAREHOUSE WITHDRAWAL ENTRIES ARE NOT ELIGIBLE FOR CARGO SELECTIVITY BECAUSE THE SUBJECT MERCHANDISE HAS BEEN PREVIOUSLY SUBJECTED TO ADMISSIBILITY REVIEW WHEN THE ORIGINAL WAREHOUSE ENTRY (TYPE 21 OR 22) WAS PROCESSED. HENCE, IF THE FILER'S WAREHOUSE WITHDRAWAL INPUT CONTAINS A CARGO CERTIFICATION FLAG ("1" IN POS 38 OF THE 30 REC), THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL USUALLY BE PRECEDED BY THE LETTERS "CERT" INDICATING THAT THIS REJECTION IS RELATED TO THE DENIAL OF CARGO RELEASE CERTIFICATION.

564:	LINE MISSING/OUT OF SEQ/INVALID

SUMMARY INPUT CONSISTS OF A SERIES OF RECORDS DESCRIBED IN THE CATAIR. IF ANY REQUIRED RECORDS ARE TRANSMITTED IN THE WRONG ORDER, OR IF REQUIRED RECORDS ARE OMITTED IN THE TRANSMISSION, THIS ERROR MESSAGE WILL RESULT. THIS MESSAGE ALSO APPLIES TO OTHER APPLICATIONS, AS DESCRIBED IN THE CATAIR, FOR WHICH RECORDS ARE TRANSMITTED THAT ARE EITHER OUT OF PROPER SEQUENCE, OR ARE NOT PART OF THE APPLICATION. FOR EXAMPLE, TRANSMITTING THE OGA CORRECTION APPLICATION (CODE CP) WITH FCC DATA WILL CAUSE THIS ERROR MESSAGE. OMITTING THE CARRIER CODE IN THE 01 RECORD FOR A BORDER CARGO RELEASE INPUT (HN) FOR AN AMS PORT WILL GET THIS MESSAGE. MOST OTHER SITUATIONS THAT RESULT IN THIS ERROR ARE FAIRLY STRAIGHTFORWARD AS TO WHICH RECORDS MAY BE MISSING OR SENT IN ERROR. FOR RECON ENTRIES, CHECK EVERY R20 RECORD THAT HAS A FOLLOWING R21 RECORD. THERE MUST BE A TRAILER COUNTER IN POS 78-79 OF THE R20 WHICH SHOWS HOW MANY R21'S ARE BEING INCLUDED FOR THE ENTRY IN THE R20. IF THE R20 SHOWS '01' IN POS 78-79, THERE MUST BE ONLY 1 R21 RECORD, AND SO ON. THE REVERSE IS TRUE, AS WELL: IF NO R21 REC, THE R20 MUST SHOW '00'.

VP8:	TOT OWED U.S. MUST = ZERO

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF A "SPACE" IS SENT IN THE D30 RECORD, POSITION 68, IT INDICATES THAT THE ASSOCIATED CANADIAN ENTRY DATA WILL BE PROVIDED. THE SYSTEM THEN LOOKS AT THE TOTAL ESTIMATED DUTY (US) IN THE D30 RECORD, POSITIONS 15-25, AND THIS ERROR MESSAGE WILL BE GENERATED IF THE DUTY IS NOT EQUAL TO ZERO.

42A:	SPI INVALID FOR CATEGORY

IF SPI FOR THIS ENTRY IS'G' THEN CATEGORY MUST BE '443', '444', '643', '644', '843', OR '844'.

216:	INVALID TARIFF NUMBER

TARIFF NUMBER BLANK OR NOT NUMERIC

56E:	INVALID ISSUER CODE

CARGO RELEASE INPUT TRANSACTIONS (APPLICATION HI) WHICH REPORT MODE OF TRANSPORTATION 10 OR 11 MUST ALSO REPORT A STANDARD CARRIER ALPHA CODE (SCAC). THIS ELEMENT IS TRANSMITTED IN THE HA, POS 70-73. IF THE CODE REPORTED IS NOT A VALID SCAC, THIS ERROR MESSAGE WILL RESULT. NOTE: IF THE ERROR DESCRIBED ABOVE IS CONTAINED WITHIN AN ENTRY SUMMARY TRANSACTION (APPLICATION EI), ERROR MESSAGE ADI WILL BE GENERATED.

1C6:	DUPLICATE ADD ERROR

THIS DRAWBACK MODULE MESSAGE MEANS THAT THE IMPORT ENTRY CITED ON THE DRAWBACK DISKETTE WAS SHOWN MORE THAN ONCE. SINCE THE DISKETTE AND ABI TRANSMISSION ARE CLAIM SUMMARIES, FILERS ARE INSTRUCTED TO ONLY SHOW AN IMPORT ENTRY ONE TIME AND SUMMARIZE THE TOTAL CLAIMED AMOUNT FOR THAT ENTRY. ON THE LEGAL PAPER CLAIM, A SINGLE IMPORT ENTRY MAY BE SHOWN MANY TIMES (FOR EXAMPLE, WHEN THEY BREAK A CLAIM DOWN BY PART NUMBER), BUT ON THE DISKETTE IT CAN ONLY APPEAR ONCE.

658:	INVALID IMPORTER NUMBER FORMAT

INPUT IS NOT ONE OF 3 ACCEPTABLE FORMATS:  SS #-NNN-NN-NNNN CUSTOMS ASSIGNED # NNNNNN-NNNNN IRS # NN-NNNNNNNXX

AAI:	MFR ID OR SHIPPER ID REQUIRED

A MANUFACTURER OR SUPPLIER CODE IDENTIFIES THE MANUFACTURER OR SUPPLIER. REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1986, FOR COMPLETE INSTRUCTIONS ON DETERMINING THE MANUFACTURER/SUPPLIER CODE.

VKX:	HLT: POS&LEN EXCEEDS FIELD LENGTH

THE LENGTH VALUE SPECIFIED IN THE OPTIONAL POSITION/LENGTH PARAMETER EXCEEDS THE TOTAL LENGTH OF THE FIELD. THE LENGTH MUST FIT WITHIN THE FIELD BEGINNING FROM THE SPECIFIED POSITION.

739:	ADDITIONAL TARIFF NBRS REQUIRED

THERE CAN BE SEVERAL CAUSES FOR THIS ERROR MESSAGE. IN GENERAL, THE MESSAGE INDICATES THAT ANOTHER TARIFF NUMBER IS A REQUIRED ASSOCIATION WITH THE ENTRY LINE TARIFF NUMBER IN QUESTION (50 REC, POS 3-14). SOME COMMON EXAMPLES ARE: -- 98020040, 50, 60, OR 80 WITHOUT A SECOND TARIFF NUMBER WHICH DESCRIBES THE ARTICLE BEING REPAIRED, ALTERED,OR ASSEMBLED. -- SOME WEARING APPAREL ENSEMBLES WHICH REQUIRE THE ACTUAL ARTICLE OF CLOTHING IN ADDITION TO THE ENSEMBLE HTS. -- WATCHES/CLOCKS, IN WHICH THE MOVEMENT, CASE, BAND, AND BATTERY MAY BE REQUIRED. -- TIB TARIFF NUMBERS IN CHAPTER 9813, WHICH REQUIRE THE IMPORTED ARTICLE'S TARIFF NUMBER.

EJC:	INVALID DIFFERENCE REASON CODE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD, POS 22-23, PROVIDES FOR THE INSERTION OF ONE OF 24 VALID TWO-CHARACTER "REASON FOR DIFFERENCE CODES". THE USE OF ANY OTHER CODE, OR A BLANK FIELD, WILL GENERATE THIS ERROR MESSAGE.

VBU:	DT HS7: TIRE CODE/BRAND REQUIRED

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37, THEN THE TIRE MANUFACTURER ID CODE (DT01 RECORD, POSITIONS 38-40) AND THE TIRE MANUFACTURER BRAND NAME (DT01, POSITIONS 41-60) MUST BE SENT.

ARW:	REFUND PARTY NBR NOT ON FILE

THE NUMBER LISTED DOES NOT EXIST ON THE USCS IMPORTER FILE. THE MOST COMMON REASON FOR THIS ERROR IS THAT THE IRS, SSN OR USCS NUMBER HAS BEEN TRANSMITTED IN AN IMPROPER FORMAT. DASHES MUST BE INCLUDED IN THE FORMAT. FOR IRS NUMBERS, NN-NNNNNNNNN IS THE REQUIRED FORMAT. FOR SSN'S, NNN-NN-NNNN IS THE REQUIRED FORMAT. FOR USCS NUMBERS, YYDDPP-NNNN IS THE REQUIRED FORMAT. IRS NUMBERS MUST BE 12 CHARACTERS LONG; NUMBERS LISTED AT THE 10 CHARACTER LEVEL WILL BE REJECTED BECAUSE ALL IRS NUMBERS ARE LISTED AT THE 12 CHARACTER LEVEL IN THE USCS IMPORTER FILE. WHEN A 2 CHARACTER SUFFIX IS NOT USED AT THE END OF THE IRS NUMBER, 2 ZEROS SHOULD BE USED (NN-NNNNNNN00).

 Next 10 >>Showing results 1 to 25 of 1405