ABI Error Message

VNF:	FD 701: NO BASE UNIT REPORTED

IF A FILER SENDS QUANTITY/UOM (UNIT OF MEASURE) INFORMATION (REC FD02) FOR AN FDA LINE, THE UOM MUST BE ONE OF THE FDA BASE UNITS LISTED ON PAGE OG-31 OF THE CATAIR IF ONLY ONE QUANTITY/UOM IS SENT. IF MORE THAN ONE QUANTITY/UOM IS SENT, THE LAST ONE MUST BE A BASE UNIT AND MUST BE A VALID ONE.

INC:	DATA CONTAINED IN SPACE FILL

TO BE USED WHEN FIELDS THAT ARE DESIGNATED 'SPACE FILL ONLY' HAVE DATA ENTERED.

506:	CALC. DUTY DOES NOT MATCH EST.

THE TOTAL DUTY CALCULATED FROM THE ENTRY LINE ITEMS DOES NOT MATCH THE ESTIMATED DUTY FOR THE ENTRY. EACH LINE ON A MULTI-LINE SUMMARY SHOULD REFLECT THE EXACT DUTY AMOUNT DUE, BASED ON THE DUTY RATES APPLICABLE TO THE TARIFF NUMBER. HOWEVER, ABI WILL ALLOW A DIFFERENCE, PER LINE, OF UP TO $2.99 (PLUS OR MINUS) BETWEEN THE ACTUAL CALCULATED DUTY AMOUNT AND THE AMOUNT TRANSMITTED BY THE ABI FILER. THIS $2.99 DIFFERENCE ALSO APPLIES TO THE ENTRY, AS A WHOLE. THUS, WHILE INDIVIDUAL LINES MAY BE ALLOWED WITH THE DUTY DISCREPANCY CITED ABOVE, THE ENTRY MAY STILL BE REJECTED IF THE TOTAL DUTY AMOUNT TRANSMITTED (90 REC, POS 3-13) IS MORE THAN $2.99 ABOVE OR BELOW THE AMOUNT CALCULATED BY ABI AS BEING THE ACTUAL DUTY FOR ALL LINES ON THE SUMMARY.

VIB:	DT HS7: VIN LIST DUP POSITION: 4

THIS MESSAGE APPLIES TO ENTRY SUMMARY TRANSMISSIONS (APPLICATION CODE EI) WHICH REPORT DOT INFORMATION IN THE DT03 RECORD. THIS RECORD PROVIDES SPACE TO REPORT UP TO FOUR VIN (VEHICLE IDENTIFICATION NUMBERS). IF THE FILER REPEATS ONE OF THE VIN'S FROM POSITIONS 1-3 IN THE DT03 RECORD IN POSITION 4 OF THE DT03, THIS MESSAGE WILL BE GENERATED.

99C:	AG LICENSE NOT REQUIRED

AN AGRICULTURE LICENSE WAS ENTERED WITH THE FIRST TARIFF NUMBER ON THE LINE OUT SIDE OF THE FOLLOWING CONSTRAINTS; '99041009' THRU '99041021' INCLUSIVE AND 99041027 THRU 99041060 INCLUSIVE. THIS ERROR IS ALSO GENERATED WHEN THE FIRST TARIFF NUMBER IS 99041030, THE COUNTRY OF ORIGIN IS 'CA' AND AN AGRICULTURE LICENSE IS ENTERED.

Q20:	'QT' REC PREVIOUSLY ACCEPTED

IF A PREVIOUS TRANSMISSION WAS SUCCESSFUL IN SENDING AN ACH AUTHORIZATION FOR THE STATEMENT NUMBER IN THE INSTANT TRANSACTION, THIS MESSAGE WILL RESULT. THE PREVIOUS TRANSMISSION DID NOT HAVE TO OCCUR ON THE SAME DAY AS THE TRANSMISSION BEING REJECTED.

99E:	INVALID ENTRY TYPE / AG LICENSE

THE ENTRY TYPE MUST BE '02', '07', '21', '22'. '26', '30', '31', '32', '34', '35', '37', OR '38' FOR AN AGRICULTURE LICENSE TO BE ENTERED.

VM2:	HLN: FIELD SELECT MUST BE Y/N

THE SELECT BY FIELD SWITCH MUST BE Y=YES OR N=NO. THIS SWITCH WILL BE USED DETERMINE IF OVERRIDE SELECT CRITERIA WILL SUPPORT A FIELD SEARCH.

07I:	VESSEL CODE & NAME SUBMITTED

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). ABI WILL ACCEPT THE VESSEL NAME, BUT NOT THE VESSEL CODE. IF BOTH ARE TRANSMITTED, THIS ERROR MESSAGE WILL BE ISSUED. (NOTE - 5-CHARACTER VESSEL CODES ARE NO LONGER USED).

VBU:	DT HS7: TIRE CODE/BRAND REQUIRED

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37, THEN THE TIRE MANUFACTURER ID CODE (DT01 RECORD, POSITIONS 38-40) AND THE TIRE MANUFACTURER BRAND NAME (DT01, POSITIONS 41-60) MUST BE SENT.

BRZ:	POSSIBLE TAX MISMATCH

R20 ORIGINAL TAX DOES NOT MATCH PAID / LIQ TAX .

FD3:	AFFIRMATION COMPLI TYPE INVALID

COMPLIANCE TYPE HAS TO BE ALPHANUMERIC WITH NO SPACES.

B22:	MID ALREADY EXISTS

THIS REJECT MESSAGE OCCURS IN THE $I (ADD MANUFACTURER) TRANSACTION WHEN A FILER ATTEMPTS TO SEND A MANUFACTURER NAME AND ADDRESS THAT IS ALREADY ON FILE.

0CM:	ELECTION CODE INVALID

THE ENTRY DATE ELECTION CODE IS IN THE HI TRANSACTION, H2 RECORD, POS 23. VALID VALUES ARE P (PRESENTATION DATE), A (ARRIVAL DATE) OR SPACE FILLED.

84N:	US ADDR SHOULD HAVE IR NBR OR SSN

BROKER CANNOT REQUEST CUSTOMS-ASSIGNED NUMBER FOR U.S. ADDRESS.

VHP:	DT HS7: INVAL CONTRACT/STMNT CERT

ONLY A "Y" IS PERMITTED IN REC DT01, POS 36 TO INDICATE THE PRESENCE OF THE IMPORTERS SUBSTANTIATING STATEMENT/CONTRACT/OR MANUFACTURER'S CONFIRMATION LETTER. ANY OTHER CHARACTER WILL RESULT IN THIS ERROR MESSAGE.

186:	MANUFACTURER NAME REQUIRED

THE MANUFACTURER NAME MAY BE LEFT BLANK BY SUMMARY LINE ENTRY PROCESSING. UPDATED MANUALLY, HOWEVER, THE FIELD IS REQUIRED.

070:	INVALID OBJECT CLASS

1 TO 3 DIGIT CODE IS NOT FOUND WHEN VALIDATED AGAINST THE CAMIS OBJECT CLASS CODE FILE. OBJECT CLASS CODE IS NOT NUMERIC. EXCEPTION: MAY BE NON-NUMERIC FOR CLASS CODES 060,061,062,063,069 OR 071. LEFT-JUSTIFIED ZEROS ARE NOT REQUIRED INPUT.

"8VH:

QUANTITY & UNITS REQUIRED FOR ADD

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE FILER TRANSMITS AN L3 RECORD, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER, THE MANIFESTED QUANTITY AND MANIFESTED UNIT OF MEASURE MUST BE TRANSMITTED. IF THE QUANTITY AND UNIT OF MEASURE ARE NOT TRANSMITTED, THIS ERROR MESSAGE WILL RESULT. NOTE: IF THE BILL NUMBER AND UNITS OF MEASURE ARE SENT, BUT THE QUANTITY IS OMITTED, THIS ERROR MESSAGE WILL STILL BE GENERATED.

0II:	IMP NO ENTRY SUMMARY MISMATCH

IF AN IMPORTER OF RECORD HAS BEEN ESTABLISHED VIA AN ABI ENTRY SUMMARY TRANSMISSION, A FILER MAY NOT USE A DIFFERENT IMPORTER OF RECORD NUMBER ON A CARGO RELEASE INPUT TRANSACTION. IF THE ORIGINAL IMPORTER NUMBER IS INCORRECT, THE SUMMARY SHOULD BE DELETED AND THE CARGO RELEASE TRANSACTION SHOULD BE RESUBMITTED AFTER THE SUMMARY HAS BEEN REMOVED.

VQQ:	MISSING PRIV DATE

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF THE CLAIM TYPE INDICATOR IN THE D01 RECORD, POSITION 4 IS A '2' (FTZ) AND THE ZONE STATUS IN THE D10 RECORD, POSITION 39 IS 'P' (PRIVILEGED), THEN THE PRIVILEGED STATUS FILING DATE IN THE D10 RECORD, POSITIONS 4-45 CANNOT BE SPACES.

57F:	SUMM REMVD FR STMT, DOCS NOW REQD

SUMMARY PAY BASIS HAS BEEN CHANGED TO SINGLE PAYMENT, SO IT IS NO LONGER ON STATEMENT AND IS NO LONGER PAPERLESS.

EIC:	INVALID PAYMENT TERMS TYPE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). PAYMENT TERMS MUST BE TRANSMITTED IN THE C02 REC, POS 6-75. EACH PAYMENT TERMS FIELD HAS A TWO CHARACTER "PAYMENT TERMS TYPE", WHICH MUST BE TRANSMITTED IN THE C02 REC, POS 4-5. THE LIST OF VALID PAYMENT TERMS TYPES IS ON PAGE AII-8 OF THE CATAIR. THE USE OF ANY OTHER CODE, OR A BLANK FIELD, IN THIS ELEMENT WILL GENERATE THIS ERROR MESSAGE

APU:	SAMPLE INDICATOR INVALID

NOTIFICATION TO CUSTOMS THAT A SAMPLE HAS BEEN SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT ANY TIME PRIOR TO ADJUDICATION OF PROTEST OR CLAIM BY CUSTOMS. 'N' INDICATES THAT A SAMPLE DOES NOT APPLY. ONCE SET TO 'S' THE SAMPLE INDICATOR CANNOT BE UN-SET TO 'N'. THE VALUE SUBMITTED IN THE SAMPLE INDICATOR IS NOT 'S' OR 'N'.

06H:	PC:V/F/T MISSING

ENTRY IS PAIRED CITIES. V/F/T IS BLANK.

 Next 10 >>Showing results 1 to 25 of 1405