ABI Error Message

EIG:	PART PACKAGE INDICATOR NOT 0 OR 1

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE PART PACKAGE INDICATOR IS TRANSMITTED IN THE C06 REC, POS 21 (OR THE LINE LEVEL C49 REC, POS 21). THE ONLY ACCEPTABLE VALUES FOR THIS ELEMENT ARE "0" (INDICATING THAT THE SHIPPING UNIT IDENTIFIED IN THE C06 RECORD IS ENTIRELY COVERED BY THE INVOICE) OR "1" (INDICATING THAT THE SHIPPING UNIT IN THE C06 RECORD IS NOT ENTIRELY COVERED BY THE INVOICE). ANY OTHER VALUE IN THIS FIELD, INCLUDING SPACES, WILL GENERATE THIS ERROR MESSAGE.

17I:	UNKNOWN APPLICATION CODE

THE ABI APPLICATION CODE ENTERED ON THE 'B' RECORD WAS NOT FOUND IN THE APPLICATION CODE FILE. ACTION: CORRECT THE CODE ENTERED ON THE 'B' RECORD AND RESTART THE APPLICATION.

DCJ:	FUTURE DATE INVALID

IN THE DRAWBACK MODULE THIS ERROR MESSAGE MEANS THAT THE DATE GIVEN IS GREATER THAN THE SYSTEM DATE (TODAY'S DATE). SINCE THE CANADIAN IMPORT WOULD HAVE HAD TO BE ALREADY FILED, THIS WOULD BE IMPOSSIBLE.

ADR:	ENTRY TYPE MUST BE 01 OR 11

A CONSOLIDATED ENTRY SUMMARY IS ONLY VALID FOR ENTRY TYPE 01 OR 11.IF A FILER TRANSMITS THE CONSOLIDATED SUMMARY FLAG "C" IN REC 30, POS 39 (EI APPLICATION INPUT), WITH ANY ENTRY TYPE OTHER THAN 01 OR 11, THIS ERROR MESSAGE WILL RESULT.

512:	TOTAL CVD DOES NOT MATCH EST.

IF THE TOTAL COUNTERVAILING DUTY REPORTED ON EACH LINE OF THE SUMMARY IN THE 60 RECORD IS WITHIN $2.99 (PLUS OR MINUS) OF THE CORRECT CALCULATED AMOUNT OF THE LINE, ABI WILL ACCEPT THE LINE AMOUNT. HOWEVER, IF THE SUMMARY HAS MORE THAN ONE LINE WITH COUNTERVAILING DUTY DUE, THE GRAND TOTAL OF ALL COUNTERVAILING DUTY AMOUNTS MUST ALSO BE WITHIN $2.99 (PLUS OR MINUS) OF THE SYSTEM-CALCULATED AMOUNT. EVEN IF THE TOTAL AMOUNT OF COUNTERVAILING DUTY (90 REC, POS 27-37) IS EQUAL TO THE VARIOUS LINE AMOUNT TOTALS, ABI WILL REJECT THE SUMMARY IF THE TOTAL AMOUNT TRANSMITTED IS NOT WITHIN THE STATED TOLERANCE AS COMPARED TO THE CALCULATED TOTAL COUNTERVAILING DUTY AMOUNT.

AAI:	MFR ID OR SHIPPER ID REQUIRED

A MANUFACTURER OR SUPPLIER CODE IDENTIFIES THE MANUFACTURER OR SUPPLIER. REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1986, FOR COMPLETE INSTRUCTIONS ON DETERMINING THE MANUFACTURER/SUPPLIER CODE.

VGC:	FD 701: STORAGE STATUS INV

THERE ARE ONLY THREE ACCEPTABLE FDA STORAGE STATUSES (REC FD01, POS 15): "R" FOR REFRIGERATED, "F" FOR FROZEN AND "A" FOR AMBIENT. USE OF ANY OTHER LETTERS, NUMBERS OR CHARACTERS WILL RESULT IN THIS ERROR MESSAGE.

460:	EST ARRIVAL DATE INVALID

IF THE ARRIVAL DATE (HI APPLICATION, REC H1, POS 34-39 OR THE EI APPLICATION, REC 20, POS 66-71) IS OLDER THAN 90 DAYS AS MEASURED FROM THE DATE OF TRANSMISSION, CARGO CERTIFICATION IS NOT PERMITTED. THIS MESSAGE WILL BE PART OF THE ABI REJECTION MESSAGE IN SUCH A CASE. IF THE ARRIVAL DATE IS MORE THAN 60 DAYS IN THE FUTURE, AS COMPARED TO THE SYSTEM TRANSMISSION DATE, THIS ERROR WILL ALSO RESULT.

02J:	PC: NONNUMERIC EST ARRIVAL DATE

ESTIMATED ARRIVAL DATE ENTERED IS NON-NUMERIC. THIS ENTRY HAS BEEN FLAGGED AS A PAIRED CITIES ENTRY. A VALID ESTIMATED ARRIVAL DATE IS REQUIRED.

DLB:	WARNING - WPN REVOKED, CHK PRIVS

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THIS MESSAGE IS A 'WARNING' THAT APPEARS IF THE CLAIMANT IS CURRENTLY IN THE PRIVILEGE FILE SHOWING THAT THE WAIVER OF PRIOR NOTICE IS REVOKED. CLAIMANTS HAVE UNTIL 4/6/1999 TO RE-APPLY FOR PRIVILEGES. MESSAGE DLB WILL BECOME A FATAL ERROR ON OR AFTER 4/6/1999.

APU:	SAMPLE INDICATOR INVALID

NOTIFICATION TO CUSTOMS THAT A SAMPLE HAS BEEN SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT ANY TIME PRIOR TO ADJUDICATION OF PROTEST OR CLAIM BY CUSTOMS. 'N' INDICATES THAT A SAMPLE DOES NOT APPLY. ONCE SET TO 'S' THE SAMPLE INDICATOR CANNOT BE UN-SET TO 'N'. THE VALUE SUBMITTED IN THE SAMPLE INDICATOR IS NOT 'S' OR 'N'.

VNX:	IMPORT SUMM DATE MUST BE > SPACES

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THERE IS NO ENTRY SUMMARY DATE IN ACS FOR THE DESIGNATED IMPORT. IN ALL PROBABILITY, THIS MESSAGE WILL APPEAR IN CONJUNCTION WITH MESSAGE VNW.

27I:	*CENSUS* MAXIMUM WEIGHT EXCEEDED

GROSS SHIPPING WEIGHT TOO GREAT FOR ENTERED MODE OF TRANSPORTATION (PER CENSUS)

35C:	INVALID IMPORTER NUMBER FORMAT

ENTERED IMPORTER NUMBER DOES NOT CONFORM TO THE IRS, SSN OR CUSTOMS-ASSIGNED NUMBER.  NOTE: ALPHA CHARACTERS "O" (OH) "I" (EYE) AND "Z" (ZEE) ARE NOT PERMITTED.

DLD:	WARNING-NO ACCEL APPV'D-CHK PRIVS

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. IT IS A 'WARNING', NOT A FATAL ERROR, THAT APPEARS IF THE CLAIMANT HAS APPLIED FOR THE ACCELERATED PRIVILEGE, BUT HAS NOT YET BEEN APPROVED. MESSAGE DLD WILL CONTINUE TO BE A WARNING ONLY AFTER 4/6/1999.

17J:	MORE THAN ONE APPLICATION CODE

MORE THAN ONE APPLICATION (B TO Y) TYPE WAS SUBMITTED WITHIN THE Z SET.

DKZ:	TARIFF NOT ONFILE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THE MESSAGE SIMPLY MEANS THAT THE NUMBER, AT THE 6, 8, OR 10 DIGIT LEVEL DOES NOT EXIST ON THE TARIFF FILE. NORMALLY, THIS OCCURS WHEN THE FILER HAS GIVEN 10 DIGITS ON OLDER RECORDS. FOR OLDER RECORDS, IF THE FILER USES 6 DIGITS (OR 8 IF PETROLEUM) THE PROBLEM IS MINIMIZED.

4F8:	COUNTRY CODE INVALID

COUNTRY CODE MUST BE VALID, ALPHABETIC ISO CODE OR 99 FOR A GLOBAL QUOTA. 99 MAY ONLY BE USED BY HEADQUARTERS QUOTA. IF THE FIELD CONTAINS NUMBERS OTHER THAN 99, IS LEFT BLANK, OR IS NOT A VALID ISO CODE, THIS MESSAGE WILL BE PROVIDED.

VLQ:	DRAWBACK EXPORT SUMM IND INVALID

THIS MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' (YES) OR 'N' (NO) FOR WHETHER THIS IS AN EXPORT SUMMARY CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR A SPACE (NO) OR '1' (YES) FOR ABI. APPLIES TO DRAWBACK MODULE.

592:	INVALID ENTRY DISTRICT /PORT

DISTRICT/PORT NON-NUMERIC OR NON-EXISTENT FOR DRAWBACK ENTRY TYPES WHERE DATE OF ENTRY IS = OR > 10/01/94 ONLY, THE FOLLOWING DISTRICT/PORT/TEAM COMBINATIONS WILL BE VALID: DDPP / TEAM DDPP / TEAM 0401 1DA 2002 5LB 1001 2DB 5301 6D0 3901 3DR 2704 7D0 5201 4LA 2809 7D7

DKG:	CLAIM EXISTS - SUBMIT 'DELETE'

THIS MESSAGE WILL APPEAR IF THE FILER HAS USED AN ADDITION/DELETION CODE OF 'A' ON THE 'CH' HEADER RECORD OF THE DRAWBACK DISKETTE (THE 'D10' RECORD FOR ABI) AND THE DRAWBACK CLAIM ALREADY EXISTS ON CUSTOMS FILE. A DELETE OF A CLAIM BY A FILER CAN ONLY BE HONORED IF THE CLAIM IS STILL IN ABI STATUS. ALL CLAIMS CREATED BY DISKETTE OR VIA ABI ARE PLACED IN ABI STATUS BY ACS WHEN FIRST ACCEPTED ERROR-FREE. THE SAME LOGIC APPLIES TO IMPORT ENTRIES FILED ELECTRONICALLY VIA ABI. ONCE IN CUSTOMS STATUS, THEY CANNOT BE DELETED BY THE FILER. IF NOT IN CUSTOMS STATUS, FILER MUST SUBMIT A 'D' ACTION CODE. NOTE: THE CLAIM CANNOT BE DELETED AT ALL IF ACCELERATED DRAWBACK HAS BEEN PAID. IF ACCELERATED HAS BEEN PAID AND THE FILER WISHES TO DELETE, THE CLAIM WILL HAVE TO BE LIQUIDATED "NO DRAWBACK" AND A BILL ISSUED FOR REPAYMENT OF THE ACCELERATED DRAWBACK. IF ACCELERATED HAS NOT BEEN PAID, BUT THE ENTRY IS IN A CUSTOMS STATUS, IT CAN BE CANCELLED, BUT NOT DELETED.

VLJ:	DUP MFGR # ENCOUNTERED/CERT MFGR

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER HAS GIVEN US THE SAME CM NUMBER (CERT MFGR #) MORE THAN ONCE ON THE CLAIM. JUST AS WITH IMPORT ENTRIES CLAIMED ON THE DISKETTE OR VIA ABI, THE CM NUMBER SHOULD ONLY APPEAR ONCE WITH THE TOTAL DRAWBACK CLAIMED FOR THAT CM.

8WI:	TRANSACTION DATA REJECTED

THIS IS THE STANDARD REJECTION MESSAGE THAT WILL BE GENERATED WHEN A BILL OF LADING UPDATE TRANSMISSION INPUT HAS FATAL ERRORS.

031:	INVALID/MISSING DISTR. PORT CODE

EITHER YOUR INPUT CODE IS NOT A FOUR DIGIT NUMERIC OR IT IS NOT ON THE ACS REGION/DISTRICT/PORT FILE.

VNH:	FD 701: BASE UNIT MUST BE LAST

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31.

 Next 10 >>Showing results 1 to 25 of 1405