ABI Error Message

AIC:	OGA FORM DATA REQUIRED

THE HARMONIZED NUMBER ON THE LINE GENERATING THIS REJECT IS CODED AS "DATA REQUIRED" (E.G.FD2) AND THE FILER IS SET TO OPERATIONAL FOR THE NAMED OGA INTERFACE AND IS NOT SENDING THE REQUIRED DATA.

2GB:	DATA REPLACED AS REQUESTED

THIS IS A NORMAL PROCESSING RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI) WHEN THE FILER IS USING ACTION CODE "R" TO REPLACE PREVIOUSLY TRANSMITTED, BUT NOT CERTIFIED, DATA.

DKJ:	CLAIM TYPE INVALID FOR NAFTA

IN THE DRAWBACK MODULE THE DRAWBACK CLAIM TYPE MUST BE '41', '42', '44' OR '45'.

AP6:	AFR REVIEW DATA INCOMPLETE

UNDER THE CUSTOMS MODERNIZATION ACT, THE PROTESTANT MAY REQUEST REVIEW OF DENIAL OF AN APPLICATION FOR FURTHER REVIEW WITHIN 60 DAYS OF NOTICE OF DENIAL OF FURTHER REVIEW. THE ELECTRONIC SIGNATURE OR OTHER DATA ELEMENT IS MISSING FROM THE P10 RECORD.

AD7:	SUPPLIER/MFG INVALID

PLEASE REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1987 FOR COMPLETE INSTRUCTIONS ON DETERMINING A VALID MANUFACTURER OR SUPPLIER CODE.

929:	DUTY DOES NOT MATCH

THE DUTY AMOUNT INPUT DOES NOT MATCH THE TOTAL OF ALL PAID DUTY AMOUNTS FOR THIS ENTRY.

C18:	TARIFF NUMBER NOT ON FILE

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE WHEN THE TARIFF NUMBER SENT IN THE D12 RECORD, POSITIONS 6-15, DOES NOT EXIST IN THE TARIFF DATABASE.

17J:	MORE THAN ONE APPLICATION CODE

MORE THAN ONE APPLICATION (B TO Y) TYPE WAS SUBMITTED WITHIN THE Z SET.

691:	INVALID PAY BASIS INDICATOR

THE STATEMENT ADD/DELETE APPLICATION (CODE HP) IS USED TO REMOVE ENTRIES FROM A STATEMENT (INDICATOR = 1) OR TO SCHEDULE AN ENTRY FOR A NEW PAYMENT DUE DATE. IF THE LATTER IS DESIRED, THREE POSSIBLE PAYMENT TYPE INDICATORS ARE ALLOWED. INDICATOR "2"  IS FOR A BROKER STATEMENT. INDICATOR "3" IS FOR AN IMPORTER STATEMENT, GROUPED BY A SINGLE IMPORTER NUMBER. INDICATOR "5" IS ALSO AN IMPORTER STATEMENT, BUT ALLOWS THE SAME BASIC IMPORTER NUMBER TO BE GROUPED, REGARDLESS OF THE SUFFIX. IF ONE OF THE ABOVE FOUR INDICATORS IS NOT TRANSMITTED (OR IF THE FIELD IS LEFT BLANK) IN THE H REC, POS 18, THIS ERROR MESSAGE WILL BE GENERATED.

LU4:	INVALID LUMBER PERMIT NUMBER

IF THE ABI FILER REPORTS A LUMBER PERMIT TYPE (40 REC, POS 70-72), A NINE- POSITION NUMERIC LUMBER PERMIT NUMBER IS REQUIRED IN THE 51 REC, POS 57-65. IF THE PERMIT NUMBER IS OMITTED, THIS ERROR MESSAGE WILL BE GENERATED.

662:	IMPORTER NUMBER IS VOIDED

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

109:	INVALID SPECIAL PROGRAMS INDICATOR

ABI ENTRY SUMMARY TRANSMISSIONS MAY INCLUDE A SPECIAL PROGRAM INDICATOR CODE ("SPI"). THE VALID CODES ARE LISTED ON PAGES ENS-48 THROUGH ENS-50 OF THE CATAIR (CUSTOMS AND TRADE AUTOMATED INTERFACE REQUIREMENTS DOCUMENT). IF A FILER'S TRANSMISSION CONTAINS A CODE NOT CURRENTLY AUTHORIZED AS A SPECIAL PROGRAM INDICATOR, THIS ERROR MESSAGE WILL RESULT.

RBZ:	INVALID RECONCILIATION ISSUE CODE

EITHER THE FILER HAS NOT PROVIDED AN ISSUE CODE IN THE R10 RECORD FOR A RECONCILIATION SUMMARY, OR THE ISSUE CODE GIVEN IS INVALID / DOES NOT EXIST.

VBH:	FW 3-177: INVLD US IMPORT PERMIT#

IF THE PERMIT # IS TRANSMITTED IN REC FW02, POS 53-60, IT MUST HAVE A MINIMUM OF SIX CHARACTERS AND NO MORE THAN 8 CHARACTERS. (NOTE: THIS PERMIT IS ISSUED BY THE FISH AND WILDLIFE SERVICE HEADQUARTERS OFFICE FOR THE IMPORTATION OF THREATENED OR ENDANGERED SPECIES FOR WHICH COMMERCIAL TRADE IS PROHIBITED.)

SG5:	INVALID TARIFF FOR CA SUGAR CERT

FOR ON-LINE, THE TARIFF NUMBER ON THE LINE IS NOT ONE OF THOSE REQUIRING SUGAR CERTIFICATE DATA FROM CANADA.

38P:	WARNING-EXP DATE>FILER ENT DATE

THE EXPORT DATE WAS FOUND TO BE GREATER THAN REVISED FILER ENTRY DATE.

VKS:	HLO: MAX 15 SORT FIELDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED FOR FORMULATE DEFAULT SORT CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

169:	INVALID COUNTRY CODE

THE COUNTRY CODE IS NOT ON FILE. IN ABI, THIS ERROR MESSAGE CAN RESULT WHEN THE FILER TRANSMITS APPLICATION EI (ENTRY SUMMARY) AND INCLUDES A 42 RECORD BUT OMITS THE SUPPLIER ID NUMBER. THE FIRST TWO CHARACTERS OF THIS RECORD REPRESENT THE ISO COUNTRY CODE. IF THE SUPPLIER ID IS BLANK, ABI INTERPRETS THIS AS AN INVALID ISO CODE AND GENERATES THIS ERROR MESSAGE.

07S:	I.T.//NON I.T. CONFLICT

THIS MESSAGE RESULTS FROM A CARGO RELEASE INPUT TRANSACTION (APPLICATION HI). IF MULTIPLE BILLS OF LADING OR AIR WAYBILLS ARE REPORTED, ALL MUST BE EITHER RELATED TO AN INBOND NUMBER OR NONE CAN BE. IF THE FILER REPORTS ONE BILL WITH AN ASSOCIATED INBOND NUMBER AND DOES NOT INCLUDE INBOND DATA FOR ANY OTHER BILLS REPORTED, THIS MESSAGE WILL RESULT.

EJS:	SUPPLIER CODE DOES NOT MATCH C01

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C08 RECORD CONTAINS SPACE TO REPORT ONE OF ELEVEN PARTY QUALIFIER CODES (SEE CATAIR PAGE AII-17 FOR A LIST OF THE VALID CODES). IF THE CODE SELECTED IS "SU", IT MUST BE AN EXACT MATCH, IN MID FORMAT, TO THE SUPPLIER CODE TRANSMITTED IN THE C01 RECORD, POS 5-19. IF THE CODE DOES NOT AGREE, THIS ERROR MESSAGE WILL BE GENERATED.

594:	INVALID DISTRICT /PORT OF UNLADING

THE PORT OF UNLADING (DIST/PORT CODE) MUST BE A VALID LOCATION AS SHOWN ON REGION/DISTRICT/PORT FILE (FOUR DIGIT DDPP). FILERS TRANSMIT THE PORT OF UNLADING FOR IMPORT SHIPMENTS IN THE ENTRY SUMMARY TRANSACTION (EI - 20 REC, POS 30-33) OR THE CARGO RELEASE TRANSACTION (HI - H1 REC, POS 65-68). IF THE PORT CODE TRANSMITTED DOES NOT EXIST ON THE DATABASE, THIS ERROR MESSAGE WILL RESULT. ***NOTE***- IN ADDITION TO THE ABOVE INFORMATION, A PORT THAT IS LISTED ON THE FILE MUST ALSO BE SET TO "Y" AS AN UNLADING PORT. IF THE PORT IS SET AS "N" FOR UNLADING PORT, THE ABOVE ERROR MESSAGE WILL BE GENERATED.

002:	INVALID UNIT OF MEASURE

UNIT OF MEASURE INPUT IS NOT AN ACCEPTED ALPHA-NUMERIC CODE, OR IS FORMATTED INCORRECTLY. FOR AUTOMATED INVOICE INPUT PURPOSES, THE ABOVE MESSAGE RELATES TO DATA TRANSMITTED IN THE C33 REC, POS 19-21 OR 61-63. VALID UNITS OF MEASURE (AS LISTED IN APPENDIX C OF THE CATAIR) SHOULD BE REPORTED IN THESE TWO FIELDS; HOWEVER, ANY REASONABLE ABBREVIATION WILL BE ACCEPTED IN THE CI APPLICATION (I.E. "DOZ" OR "DZ" FOR DOZEN, ETC.) IF POS 19-21 OR 61-63 ARE BLANK, AND A QUANTITY IS TRANSMITTED IN POS 4-18, THIS ERROR MESSAGE WILL BE GENERATED.

VP9:	TOT CANADIAN PAID MUST = ZERO

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL NAFTA CTRY PAID DUTY IS SENT IN THE D30 RECORD, POSITIONS 26-36. IT MUST BE ZERO IF IT IS GREATER THAN THE TOTAL ESTIMATED DUTY (U.S.). (JO 081098) THIS MESSAGE IS ALSO GENERATED WHEN POSITION 68 OF THE D30 RECORD IS SPACED FILLED INDICATING THAT THE ASSOCIATED NAFTA CTRY ENTRY DATA WILL BE PROVIDED AND NO D20 RECORD CONTAINING THE DATA IS SENT.

VKK:	HLT: OVERRIDE CRIT. MUST BE Y/N

THE OVERRIDE CRITERIA SWITCH IS REQUIRED AND MUST BE Y=YES OR N=NO. N=NO.

VPP:	EXPORT DT CANNOT BE > SYS DATE +2

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN POSITIONS 22-27 OF THE D01 RECORD AND CANNOT BE MORE THAN 2 DAYS IN ADVANCE OF THE SYSTEM DATE.

 Next 10 >>Showing results 1 to 25 of 1405