ABI Error Message

CBB:	STATE/ZIP MISMATCH

THE STATE CODE AND ZIP CODE CAN BE SENT IN MANY APPLICATIONS IN ABI. A ZIP FILE EXISTS TO CHECK THE FIRST THREE DIGITS OF THE CODE AGAINST THE STATE CODE GIVEN. IF IT DOES NOT MATCH, THIS ERROR MESSAGE RESULTS.

VA9:	FW 3-177: FWS VALUE EXCEEDS USCS

HI APPLICATION: THE FWS LINE ITEM VALUES EXPRESSED IN THE FW01 RECORD(S) POS 63-72 CANNOT EXCEED THE LINE ITEM VALUE IN THE H5 RECORD POS 45-54. ADDITIONALLY, THE TOTAL FWS LINE ITEM VALUES FOR ALL LINES CANNOT EXCEED THE TOTAL VALUE IN THE H2 RECORD, POS 29-38. EI APPLICATION: THE FWS LINE ITEM VALUES EXPRESSED IN THE FW01 RECORD(S) CANNOT EXCEED THE LINE ITEM VALUE EXPRESSED IN THE 40 RECORD POS 8-17, OR IN THE 70, 80, OR 81 REC, POS 69-78.

EJ1:	TOTAL AMT OF INVOICE LINES WRONG

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C84 REC, POS 4-18, IS WHERE THE TOTAL DOLLAR AMOUNT OF ALL THE INVOICE LINES ON THE INSTANT INVOICE IS REPORTED. THIS AMOUNT WILL INCLUDE THE ITEM AMOUNT TOTAL FROM EACH C33 REC, POS 37-51, PLUS OR MINUS THE APPROPRIATE ALLOWANCES OR CHARGES REPORTED IN ANY C17 OR C53 RECORD. THESE AMOUNTS ARE TOTALED AT THE FOUR-DECIMAL LEVEL AND THEN SHOULD BE ROUNDED TO TWO DECIMALS FOR INCLUSION IN THE C84 RECORD. IF THE FIGURE REPORTED IN THE C84 RECORD DOES NOT AGREE WITH THE OTHER TOTALS, THIS ERROR WILL BE GENERATED. THERE IS A $3.00 (PLUS OR MINUS) VARIATION ALLOWED BETWEEN THE C84 TOTAL AND THE TOTAL OF THE OTHER RECORDS.

RBX:	RECON SITE NOT AUTH FOR IMPORTER

THE DDPP OF THE RECONCILIATION SUMMARY IN THE 'R10' RECORD IS NOT ONE OF THE AUTHORIZED RECONCILIATION FILING LOCATIONS INDICATED IN THE 'RCI' RECORD FOR THE GIVEN IMPORTER.

4GS:	NO QUOTA RECORDS FOR TARIFF

QUOTA RECORDS CONTAIN QUOTA TYPE = 'S' (STATISTICAL). THESE RECORDS ARE NOT FOR PUBLIC KNOWLEDGE PER CITA.

B24:	LOWER CASE LETTERS FIRM/ADDR/CITY

FIRM NAME FIELD, ADDRESS FIELD, OR CITY NAME FIELD CONTAINS LOWER CASE ETTERS. IN ABI TRANSACTIONS, FILERS SHOULD ALWAYS SUBMIT UPPER CASE ALPHA CHARACTERS. IF THEIR SYSTEM SENDS LOWER CASE LETTERS IN EITHER THE FIRM NAME OR CITY FIELDS, THIS MESSAGE WILL BE GENERATED.

EJM:	INVOICE ADDITIONAL AMOUNT WRONG

THIS MESSAGE IS GENERATED IN RESPONE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C84 REC, POS 19-33, IS USED TO REPORT ANY ALLOWANCE OR CHARGES THAT SHOULD BE ADDED TO THE INVOICE AMOUNT TO REFLECT THE PROPER INVOICE TOTALS. THE C17 REC PROVIDES SIX TYPES OF ADJUSTMENTS (SEE PAGE AII-23 FOR THE VALID ALLOWANCE/CHARGE INDICATORS). IF ANY OF THESE TYPES EXCEPT "N" OR "D" ARE USED, THE AMOUNTS OF THESE ADJUSTMENTS, WHETHER ADDITIONS OR SUBTRACTIONS TO THE DUTIABLE TOTAL AMOUNT, ARE TRANSMITTED IN THE C18 RECORD. THE TOTAL OF THESE UPS OR DOWNS ARE TRANSMITTED IN THE C84 RECORD IN POS 19-33. IF THE TOTAL ADJUSTMENTS IS A NEGATIVE NUMBER, POS 34 OF THE C84 RECORD MUST BE AN "N". **NOTE** - THIS IS A HEADER LEVEL MESSAGE. IF ADJUSTMENTS ARE MADE AT THE INVOICE LINE LEVEL, THOSE TOTALS ARE NOT CARRIED FORWARD TO THE C84 RECORD.

14M:	QTY/RANGE ERROR FOR TARIFF NBR

ENTERED QUANTITY IS NOT IN RANGE FOR THE TARIFF NBR IN THE TARIFF DATABASE. THIS ERROR MESSAGE GENERATES IN RESPONSE TO SPECIFIC QUANTITY EDITS EXISTING ON THE TARIFF FILE. THE TARIFF NUMBERS QTY1/QTY2 VALUES REPORTED VIA ABI FALL OUT OF RANGE FOR THE EXISTING TARIFF QTY LO/HI BOUNDS. TO CALCULATE THE QUANTITY RATIO, USE THE QTY EDIT CODES LOCATED ON THE TARIFF DATABASE. FOR EXAMPLE, SEE HTS 5208521000. THE QTY EDIT CODES ARE 211. USE THE SECOND REPORTED QUANTITY (KG) AS THE NUMERATOR AND THE FIRST REPORTED QUANTITY (M2) AS THE DENOMINATOR TO DERIVE THE QUANTITY RATIO (SEE HTS USER'S GUIDE APPENDIX D, PAGES D-3 & D-4). FOR THIS HTS, THE QTY RATIO MUST FALL BETWEEN THE LO/HI/ QTY VALUES OR THIS ERROR MESSAGE WILL RESULT. TO CORRECT THE ERROR, THE FILER CAN 1) VERIFY THE QUANTITIES, 2) CONSULT THE HARMONIZED TARIFF FOR A BETTER CLASSIFICATION OR 3) CONTACT AN IMPORT SPECIALIST. ERROR MSG 15K, "DUTY COMPUTATION NOT PERFORMED" WILL ALSO BE GENERATED WITH MSG 14M.

109:	INVALID SPECIAL PROGRAMS INDICATOR

ABI ENTRY SUMMARY TRANSMISSIONS MAY INCLUDE A SPECIAL PROGRAM INDICATOR CODE ("SPI"). THE VALID CODES ARE LISTED ON PAGES ENS-48 THROUGH ENS-50 OF THE CATAIR (CUSTOMS AND TRADE AUTOMATED INTERFACE REQUIREMENTS DOCUMENT). IF A FILER'S TRANSMISSION CONTAINS A CODE NOT CURRENTLY AUTHORIZED AS A SPECIAL PROGRAM INDICATOR, THIS ERROR MESSAGE WILL RESULT.

VLG:	IMPORT TRAILER # OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE IMPORT TRAILER SEQUENCE NUMBERS ARE OUT OF SEQUENCE IN THE DRAWBACK MODULE. NOTE THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. IF ONLY 1 CONTRACT IS USED ON A CLAIM, THAT CONTRACT NUMBER SHOULD APPEAR IN THE CLAIM HEADER RECORD. THE CONTRACT TRAILER RECORD SHOULD NOT BE USED UNLESS THERE ARE MULTIPLE CONTRACTS ON A CLAIM. THE CONTRACT TRAILER COUNTER IS NOT A COUNT OF CONTRACTS, BUT IS A COUNT OF THE CONTRACT TRAILER RECORDS. IF ONLY ONE CONTRACT IS USED,THE COUNTER SHOULD BE 00, SINCE THERE WILL BE NO TRAILER RECORDS. IF 2 CONTRACTS ARE USED THERE WILL BE ONE CONTRACT TRAILER AND THE COUNT WILL BE 01. THREE CONTRACTS WOULD MEAN TWO TRAILERS AND THE COUNT WOULD BE 02, ETC.. FOR RECONCILIATION, THIS MEANS THAT THE SEQUENCING OF THE IMPORT ENTRY ASSOCIATION RECORDS ('R20') IS OUT OF ORDER.

AEV:	PIRP NUMBER TYPE IS INVALID

FILERS CAN TRANSMIT PIRP NUMBERS IN THE ENTRY SUMMARY (EI) INPUT IN THE 43 RECORD, POS 3-8.ANY NUMBER TRANSMITTED IN THIS FIELD MUST BE ACCOMPANIED BY AN APPROPRIATE "TYPE INDICATOR" IN POS 9.THE TYPE INDICATOR MUST AGREE WITH THE TYPE OF PRE-IMPORTATION NUMBER CODE THAT HAS BEEN ASSIGNED TO THE NUMBER REPORTED IN POS 3-8. IF THE FILER TRANSMITS A TYPE OTHER THAN THAT ASSIGNED TO THE PIRP NUMBER, THIS ERROR MESSAGE WILL BE GENERATED.

8VB:	COMPUTER SITE INVALID FOR BLOCK

THIS MESSAGE IS GENERATED IN RESPONSE TO A TIB EXTENSION REQUEST (APPLICATION XN), ALTHOUGH IT MAY APPLY TO OTHER APPLICATIONS, AS WELL. IN THE INPUT RECORDS, THE XA RECORD CONTAINS A FIELD FOR THE DDPP OF THE SUMMARY FOR WHICH AN EXTENSION IS BEING REQUESTED. (POS 3-6). IF THAT FIELD IS LEFT BLANK, THIS MESSAGE IS GENERATED. NOTE: THIS MESSAGE WILL ALSO OCCUR IF THE PORT CODE FIELD IN THE XA RECORD IS NOT IDENTICAL TO THE PORT OF ENTRY FOR THE ENTRY BEING EXTENDED.

0GI:	VESSEL CODE NOT PERMITTED FOR MOT

THIS MESSAGE WILL GENERATE, IF A VESSEL CODE (REC. 20, POS. 3-7) IS TRANSMITTED IN THE ENTRY SUMMARY INPUT TRANSACTION WITH A MODE OF TRANSPORTATION CODE OTHER THAN OCEAN (MOT = 10, 11).

824:	ULT CONS ON REGION SANCTION

THIS ENTRY SHOULD BE REJECTED TO THE FILER. A DUTY PAID 'LIVE' ENTRY IS REQUIRED. REFER FILER TO ASSIGNED ENTRY SPECIALIST TEAM IN THE PORT OF ENTRY.

AS4:	WRN: 520 CLAIM MAYBE UNTIMELY

A 520 PETITION MAY BE FILED WITHIN 1 YEAR OF THE DATE OF NOTICE OF LIQUIDATION OF AN ENTRY. ACS COMPARES THE SYSTEM DATE TO THE DATE OF LIQUIDATION OF THE ENTRY (OR OLDEST ENTRY WHEN MULTIPLE ENTRIES ARE CITED), TO DETERMINE IF THE DATE OF FILING HAS OCCURRED AFTER THE 365TH DAY. ACS DOES NOT CALCULATE 365 DAYS FROM DATE OF IMPORTATION FOR 520(D) PETITIONS.

08D:	NEW ENT-NBR INVLD BEFORE 10-01-86

THE ENTRY NUMBER SUBMITTED IS IN THE NEW ENTRY NUMBER FORMAT. THE ESTIMATED DATE OF ARRIVAL IS PRIOR TO 10-01-86. NEW ENTRY NUMBER FORMAT IS VALID ONLY FOR ENTRIES WITH ESTIMATED DATES OF ARRIVAL ON OR AFTER 10-01-86.

10U:	RECORD NOT FOUND

FILERS WHO USE APPLICATION HI TO TRANSMIT CARGO RELEASE DATA MAY USE BOND TYPE CODE "8" (CONTINUOUS BOND) OR "9" (SINGLE TRANSACTION BOND). BOND TYPES ARE TRANSMITTED IN THE H1 REC, POS 40. IF BOND TYPE 9 IS ELECTED, THE FILER IS REQUIRED TO TRANSMIT A SURETY CODE (H1 REC, POS 71-73). IF THE SURETY CODE TRANSMITTED IS IN "REVOKED" STATUS, THIS ERROR MESSAGE WILL RESULT.

4NN:	LINE ITEM VALUE ERROR

IF A FILER TRANSMITS A CARGO RELEASE DATA TRANSACTION (APPLICATION HI), AND ALSO ELECTS TO REPORT VALUES AT THE LINE ITEM LEVEL (H5 REC, POS 45-54), THE TOTAL OF ALL VALUES IN THE H5 RECORD MUST EQUAL THE AMOUNT SHOWN AS THE TOTAL ENTRY VALUE (H2 REC, POS 29-38). THE TOTAL DOES NOT AGREE, THIS ERROR MESSAGE WILL BE GENERATED.

RB7:	R89 AND R21 ORIG AMTS DIFFER

TTHIS MEANS THAT THE ORIGINAL FEE AMOUNTS GIVEN FOR AN ENTRY-BY-ENTRY RECON IN THE 'R21' RECORDS FOR A GIVEN CLASS CODE DO NOT AGREE WITH THE 'R89' TOTAL ORIGINAL FEE AMOUNT FOR THAT CLASS CODE GIVEN IN THE 'R89' RECORD(S).

ARR:	ON FILE OR ACTION CODE IS WRONG

THE ID NUMBER OF THE REFUND CARE/OF PARTY IS ALREADY ON THE PROTEST RECORD MAKING IT A DUPLICATE, OR THE FILER NEEDS TO CHECK THAT THE APPROPRIATE ACTION CODE IS BEING USED: "A" = ADD, "R" = REPLACE.

17K:	INVALID APPLICATION CODE

THE APPLICATION CODE FOUND ON THE 'B' RECORD WAS LOCATED IN THE APPLICATION CODE FILE, HOWEVER, THE CODE IS NUMERIC AND RESERVED FOR SPECIAL USE.

AQX:	LEAD PROTEST NBR NOT ON FILE.

THE NUMBER ENTERED IN THE LEAD PROTEST NUMBER FIELD IS NOT A VALID CUSTOMS ASSIGNED PROTEST NUMBER.

89F:	FEE CODE REQUIRED BUT NOT ENTERED

A FEE CODE OR AMOUNT WAS NOT ENTERED BUT IS REQUIRED BY TARIFF.

VHG:	DT HS7: ISO CODE REQUIRED

THIS CODE (RECORD DT01 POS 30-31) IS REQUIRED WHEN BOX NUMBER (RECORD DT01, POS 8-9) 05, 06, OR 12 IS TRANSMITTED. (NOTE: IF BOX 05 IS USED, A DT02 RECORD IS ALSO REQUIRED, EVEN IF THE IMPORTED ARTICLE IS NOT A VEHICLE. (THIS IS A SYSTEM DESIGN FLAW.) ISO CODE CANNOT BE USED WITH ANY OTHER HS-7 BOX NUMBER THAN THOSE SPECIFIED IN THIS MESSAGE.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

 Next 10 >>Showing results 1 to 25 of 1405