ABI Error Message

BRJ:	AGGREGATE: ALL AMTS MUST BE ZERO

IF THE RECON IS AN AGGREGATE, ALL MONETARY AMOUNTS ON THE 'R20' IMPORT ENTRY ASSOCIATION RECORDS MUST BE ZERO.

AFN:	ADD/CVD ENTRY REQUIRES 35 REC.

IF THE ENTRY TYPE IS 03 OR 07 (APPLICATION EI, REC 10, POS 71-72), A 35 RECORD IS REQUIRED.

FDL:	NO FDA RECORD ON FILE FOR ENTRY

THIS MESSAGE OCCURS IN A FDA INTERFACE SITUATION WHEN A FILER ATTEMPTS TO SEND AN OTHER GOVERNMENT AGENCY CORRECTION ('CP') TRANSACTION FOR AN ENTRY THAT WAS NOT ORIGINALLY A FDA INTERFACE ENTRY. TYPICALLY IT INVOLVES A FILER SENDING AN ENTRY WITH NO REGULATED FDA TARIFF NUMBERS ON IT THEN ATTEMPTING TO SEND A 'CP' WITH THE FDA REGULATED TARIFF NUMBER(S). THE ONLY SOLUTION IS FOR CUSTOMS TO DO A PEN AND INK CHANGE TO THE ENTRY OR TO HAVE CUSTOMS DELETE THE ENTRY AND THE FILER THEN RESENDS THE CORRECT INFORMATION.

VAT:	PAPERLESS/PAID MUST CONTAIN 'E'

THIS MESSAGE OCCURS IN THE ELECTRONIC INVOICE ENVIRONMENT WHEN A FILER RESENDS AN AII ENTRY SUMMARY, AFTER IT HAS BEEN PAID THEN SUBSEQUENTLY REJECTED BY CUSTOMS, WITHOUT SENDING AN 'E' IN POSITION 56 OF THE ABI 10 RECORD.

228:	INVALID DAY FOR BEGINNING DATE

DAY OF BEGINNING EFFECTIVE DATE UPDATE IS INVALID

VK3:	HLS: CONSTANT VALUE REQUIRED

A CONSTANT VALUE OPERAND IS REQUIRED WITH OPERAND TYPE 'C'. THE CONSTANT MAY BE A DISPLAY LITERAL IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X '....'

VL7:	DRAWBACK DDPP NOT FOUND

THIS MESSAGE MEANS THAT THE FILER HAS USED AN IMPOSSIBLE DDPP IN THE DRAWBACK MODULE.

AEZ:	RLSE'S NOT REQUIRED BY 30 REC

THIS MESSAGE OCCURS WHEN A 32 RECORD IS TRANSMITTED IN AN EI ENTRY SUMMARY TRANSACTION (CONSOLIDATED ENTRY RECORD) AND A 'C' IS NOT SENT IN THE 30 RECORD, POSITION 39 SIGNIFYING A CONSOLIDATED ENTRY.

AFK:	CVD PYBL AMT INVALID; 35 REC

THE PAYABLE COUNTERVAILING DUTY AMOUNT TRANSMITTED IN REC 35, POS 38-48 DOES NOT EQUAL THE SUM OF THE COUNTERVAILING LINE ITEM AMOUNTS TRANSMITTED IN REC 60, POS 3-12.

66A:	IMPORTER IS INACTIVE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANS- ACTION (APPLICATION HI). IF THE IMPORTER NUMBER (H1 REC, POS 20-31) IS IN 'INACTIVE' STATUS ON THE IMPORTER DATABASE, THIS ERROR MESSAGE WILL BE GENERATED. TO REACTIVATE, THE FILER MUST SEND AN "ADD CF5106" TRANSACTION WITH THE IMPORTER'S FULL NAME AND ADDRESS INFORMATION.

ARV:	REFUND PARTY ID NBR REQUIRED

A VALID IRS OR USCS ASSIGNED ID NUMBER PRESENT ON THE USCS IMPORTER DATABASIS REQUIRED FOR ALL REFUND C/O PARTY TYPES.

VMC:	HLO: SORT ORDER MUST BE A/D

THE SORT ORDER CODE IS REQUIRED AND MUST BE A=ASCENDING D=DESCENDING.

VKI:	HLT:DUPE DEF. NOT FOUND (HLT)

THE TABLE NAME/SEARCH NUMBER COMBINATION SPECIFIED TO BE DUPLICATED FROM DO NOT EXIST ON THE HLT DB.

23H:	BOND SANCTION IN EFFECT

THIS MESSAGE INDICATES THAT A SANCTION HAS BEEN PLACED AGAINST THE INDIVIDUAL BOND TRANSMITTED BY THE FILER.

EJU:	ITEM AMT MUST=UNIT PRCXNO PRC UNT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C33 RECORD ENABLES THE FILER TO REPORT NUMBER OF ITEMS IMPORTED, COST PER ITEM AND TOTAL COST FOR THE ITEM, AMONG OTHER ELEMENTS. IF THE NUMBER OF PRICING UNITS, WHEN MULTIPLIED BY THE PRICE PER UNIT, DOES NOT EQUAL THE "ITEM AMOUNT" TOTAL, REPORTED IN POS 37-51 OF THIS RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE FIGURE SENT TO ABI CAN VARY BY UP TO, BUT NOT OVER, $1 (PLUS OR MINUS) FROM THE CALCULATED AMOUNT FOR "ITEM AMOUNT" TO BE ACCEPTABLE TO ABI.

VBW:	DT HS7: WARN - TIRE BRAND MISSING

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37 AND THE TIRE MANUFACTURER ID CODE IN POSITIONS 38-40, THE TIRE MANUFACTURER BRAND NAME SHOULD BE SENT IN POSITIONS 41-60.

0MD:	DIST/PORT REQUIRED FOR ENTRY NBR

THIS MESSAGE IS GENERATED WHEN THE ENTERED ENTRY NUMBER IS DETECTED AS HAVING AN INVALID CHECK BASED ON NEW/OLD ENTRY NUMBER CHECK DIGIT CALCULATION.

28M:	DATA NOT DELETED IN TEST MODE

THIS ERROR MESSAGE OCCURS IN THE AII MODULE. THE DATA BASE IS UNAFFECTED BY A DATA TRANSMISSION BECAUSE THE SENDER'S STATUS WAS "TEST" FOR AII.

8P1:	INELIGIBLE - CONSOLIDATED RLSE

THIS DRAWBACK MODULE ERROR MESSAGE WILL OCCUR IF AN IMPORT ENTRY IS DESIGNATED THAT WAS NOT AN ENTRY SUMMARY, BUT A CONSOLIDATED RELEASE. IN THESE CASES, THE ENTRY THAT SHOULD BE CITED, IF ANY, WOULD BE THE CONSOLIDATED SUMMARY AGAINST WHICH DUTIES/TAXES WERE PAID.

ASJ:	PROTESTED ISSUE NOT APPLICABLE

THE P70 CANNOT BE REPEATED OR TRANSMITTED AS PART OF AN AMENDMENT, ADDENDA, SERVICE REQUEST.

95E:	ENTRY NOT ELIGIBLE FOR RECONCILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). ONLY THREE ENTRY TYPES ARE ELIGIBLE FOR THE RECONCILIATION PROTOTYPE AS OF OCT 1998. THE THREE TYPES ARE "01", "02", AND "06". IF ANY OTHER ENTRY TYPE IS TRANSMITTED IN THE 10 REC, POS 71-72, THIS ERROR MESSAGE WILL RESULT.

10N:	I.T. FOR IMMEDIATE EXPORTATION

THIS MESSAGE OCCURS IN THE ABI EI AND HI TRANSACTIONS WHEN AN I.T. IS SENT IN POSITIONS 3-14 OF THE EI 22 RECORD OR IN POSITIONS 3-14 OF THE HI HA RECORD THAT HAS BEEN INPUT IN THE IN-BOND SYSTEM AS A CODE 63, I.T. FOR IMMEDIATE EXPORTATION. THE TYPE MUST BE CHANGED TO A NON-EXPORT TYPE BEFORE THE ENTRY CAN BE RESENT.

0M9:	INVALID ISO CODE FOR MFG ID

THE TWO CHARACTER ISO CODE USED IN THE MANUFACTURER IDENTIFICATION (MID) FIELD ON SUMMARY OR CARGO RELEASE INPUT TRANSMISSIONS MUST REPRESENT A VALID COUNTRY WHICH IS LISTED ON THE COUNTRY CODE DATABASE. IF THE CODE IS NOT ON THAT DATABASE, THIS ERROR MESSAGE WILL RESULT. THE MID IS TRANSMITTED IN THE SUMMARY INPUT IN REC 60, POS 43-58 AND IN THE CARGO RELEASE INPUT IN REC H5, POS 18-32. IF THE ENTRY INVOLVES A CANADIAN MID, THE ISO CODE MUST BE ONE OF THE 10 CANADIAN PROVINCE CODES (X, FOLLOWED BY AN ALPHA CHARACTER). ERROR MESSAGE AAM WILL BE GENERATED FOR INCORRECT CANADIAN MIDS. FOR AUTOMATED INVOICE (APPL CI), THE RECORDS AFFECTED ARE THE C01 RECORD, THE C08 RECORD, AND THE C11 RECORD.

646:	IMPORTER NUMBER NOT ON FILE

THIS ERROR MESSAGE INDICATES THE IRS/SS/CUSTOMS ASSIGNED NUMBER FOR THE DRAWBACK CLAIMANT DOES NOT EXIST ON THE IMPORTER FILE. AN ELECTRONIC CF 5106 MUST BE TRANSMITTED OR A MANUAL CF 5106 MUST BE FILED.

0B0:	INVALID 'ISO' COUNTRY CODE

THE COUNTRY CODE ENTERED IS NOT ONE OF THE VALID 'ISO' COUNTRY CODES. FOR THE AUTOMATED INVOICE INTERFACE APPLICATION (CI), THIS MESSAGE INDICATES THAT THE COUNTRY CODE IN THE C11 REC, POS 57-58, IS EITHER BLANK OR DOES NOT APPEAR ON THE LIST OF VALID ISO COUNTRIES.

 Next 10 >>Showing results 1 to 25 of 1405