ABI Error Message

VNN:	ACCEL. NOT ALLOWED FOR BOND TYPE

IN THE DRAWBACK MODULE THE ACCELERATED INDICATOR MAY ONLY BE A 'Y' IF THE BOND TYPE CODE IS NOT '0' (WOULD BE EITHER '8' OR '9'), UNLESS THE GOVERNMENT CLAIM INDICATOR IS ALSO 'Y' ('1' IF ABI).

8WA:	NO ENTRY EXISTS OR ENTRY CLOSED

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRASNMISSION. IF THE FILER ATTEMPTS TO SEND APPLICATION LN AGAINST AN ENTRY NUMBER FOR WHICH NO PROVISIONAL SELECTIVITY STATUS HAS BEEN ISSUED BY ABI, THIS ERROR MESSAGE WILL BE GENERATED. MOST OF THE TIME, ERROR MESSAGE 8WB, ENTRY BELONGS TO ANOTHER DD/PP, WILL ALSO BE GENERATED. **NOTE** - THIS MESSAGE CAN ALSO APPLY TO OTHER APPLICATIONS WHICH INVOLVE AN ENTRY NUMBER THAT IS NOT RESIDENT ON THE ENTRY OR SELECTIVITY DATABASES. **NOTE** THIS ERROR MESSAGE ALSO APPLIES TO A FILER'S ATTEMPT TO SEND A TIB EXTENSION REQUEST AFTER THE DATE THAT THE TIB ENTRY SHOWS AS 'CLOSED' PER THE ENTRY RECORD.

EJB:	UNITS OF MEASURE MUST BE EQUAL

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD, POS 19-21, IS USED TO REPORT THE UNIT OF MEASURE OF THE QUANTITY REPORTED IN POS 4-18.THIS UNIT OF MEASURE MUST BE IDENTICAL TO THE UNIT OF MEASURE REPORTED IN THE C33 RECORD, POS19-21. IF THE UNITS ARE NOT IDENTICAL, THIS ERROR MESSAGE WILL RESULT.

VK3:	HLS: CONSTANT VALUE REQUIRED

A CONSTANT VALUE OPERAND IS REQUIRED WITH OPERAND TYPE 'C'. THE CONSTANT MAY BE A DISPLAY LITERAL IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X '....'

552:	ENTRY DELETE NOT ALLOWED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY DELETE INPUT TRANSACTION (APPLICATION EI). IF THE FILER HAS PREVIOUSLY TRANSMITTED AN ENTRY SUMMARY THAT WAS REJECTED, AND THE SUMMARY IN QUESTION HAS NOT BEEN PAID IN OR OTHERWISE FILED WITH A LOCAL CUSTOMS OFFICE, THE ABI REJECT WILL ERASE PREVIOUSLY TRANSMITTED ABI ENTRY SUMMARY DATA. IN SUCH A CASE, THE TRANSMISSION OF AN ENTRY SUMMARY DELETE TRANSACTION (ACTION CODE "D" IN POS 3 OF THE 10 REC) WILL GENERATE THIS ERROR MESSAGE.

VAC:	FC 740:03 APPROVAL NOT REQUIRED

A 03 PRIOR APPROVAL INDICATOR IS NOT REQUIRED FOR QUANTITIES LESS THAN 201.

FDK:	ENTRY NOT IN FDA REJECT STATUS

FILER WILL RECEIVE THIS MESSAGE WHEN THEY TRY TO USE THE FDA CORRECTION CAPABILITY (CP APPLICATION) AND THE ENTRY IS NOT IN FDA "REJECT" STATUS. THE FILER MUST HAVE RECEIVED A FDA "DT" REJECT THROUGH ABI BEFORE THEY CAN SUE THE "CP' CORRECTION. THE "CP" CANNOT BE USED INDEPENDENTLY.

VA3:	FORM REC TYPE INV/OUT OF SEQ

THIS MESSAGE OCCURS IN A FDA INTERFACE ENTRY. THE REQUIRED ORDER OF FDA LINES IS: FD01 FD02 FD03 FD04 (OPTIONAL) FD05 (OPTIONAL) IF ONE OF THE RECORDS IS OMITTED (E.G. FD01 THEN FD03) THIS MESSAGE WILL OCCUR.

658:	INVALID IMPORTER NUMBER FORMAT

INPUT IS NOT ONE OF 3 ACCEPTABLE FORMATS:  SS #-NNN-NN-NNNN CUSTOMS ASSIGNED # NNNNNN-NNNNN IRS # NN-NNNNNNNXX

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

4AC:	IN-BOND NUMBER NOT FOUND

THIS MESSAGE INDICATES THAT THE FILER PROVIDED AN INBOND NUMBER IN HIS EI (ENTRY SUMMARY) TRANSACTION, BUT DID NOT INCLUDE A MASTER BILL NUMBER (OR AIR WAYBILL) IN THE 22 RECORD. AS OF SEP 28, 1998, THE REVISED INBOND PROGRAM REQUIRES INBOND NUMBERS TO BE ACCOMPANIED BY BILL NUMBERS. THIS ERROR SHOULD NOT OCCUR FOR TRUCK SHIPMENTS (MOT 30 OR 31), BUT, AS OF SEP 30, 1998, IF THE BILL OF LADING FIELD DOES NOT CONTAIN A MINIMUM OF 5 CHARACTERS, THIS MESSAGE WILL BE GENERATED.

DKJ:	CLAIM TYPE INVALID FOR NAFTA

IN THE DRAWBACK MODULE THE DRAWBACK CLAIM TYPE MUST BE '41', '42', '44' OR '45'.

07P:	MASTER BILL NBR REQ'D WITH I.T.

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE INPUT TRANSACTION (APPLICATION HI). IF AN H5 RECORD CONTAINS DATA IN THE INBOND NUMBER FIELD (POS 3-14), THERE MUST BE DATA IN THE MASTER BILL FIELD, AT A MINIMUM. IF THERE IS NO MASTER BILL DATA, THIS ERROR MESSAGE WILL RESULT.

1GF:	ENTRY RELEASE ON FILE

INFORMS OPERATOR THAT RELEASE IS ON FILE FOR ENTRY NUMBER

VIB:	DT HS7: VIN LIST DUP POSITION: 4

THIS MESSAGE APPLIES TO ENTRY SUMMARY TRANSMISSIONS (APPLICATION CODE EI) WHICH REPORT DOT INFORMATION IN THE DT03 RECORD. THIS RECORD PROVIDES SPACE TO REPORT UP TO FOUR VIN (VEHICLE IDENTIFICATION NUMBERS). IF THE FILER REPEATS ONE OF THE VIN'S FROM POSITIONS 1-3 IN THE DT03 RECORD IN POSITION 4 OF THE DT03, THIS MESSAGE WILL BE GENERATED.

AD7:	SUPPLIER/MFG INVALID

PLEASE REFER TO CUSTOMS DIRECTIVE 3500-13, DATED NOVEMBER 24, 1987 FOR COMPLETE INSTRUCTIONS ON DETERMINING A VALID MANUFACTURER OR SUPPLIER CODE.

"66E:

INVALID 4811-REF NUMBER FORMAT

THIS MESSAGE INDICATES THAT THE FORMAT OF THE DRAWBACK CLAIMANT ID REFERENCE 4811 NUMBER IS NOT A VALID IRS/SS/CUSTOMS ASSIGNED NUMBER FORMAT. VALID IRS NUMBER FORMAT IS NN-NNNNNNNXX (WHERE 'XX' = SUFFIX); SS IS NNN-NN-NNNN; CUSTOMS ASSIGNED IS YYDDPP-NNNNN. (JO 050798) FOR RECONCILIATION, THE MESSAGE HAS THE SAME MEANING.

AQP:	BASE DATE QUALIFIER REQUIRED

WHEN A FILING/AMENDMENT PERIOD BASE DATE IS SUBMITTED, FILER MUST DECLARE THE LIFECYCLE EVENT ASSOCIATED TO THE DATE. VALID VALUES ARE: 1 - DATE OF NOTIFICATION OF CUSTOMS DECISION ADVERSE TO PROTESTANT 2 - DATE OF NOTIFICATION OF ADVERSE COUNTRY MARKING DECISION UNDER NAFTA 3 - DATE OF EXACTION 4 - DATE OF NOTIFICATION OF DEMAND FOR PAYMENT AGAINST A BOND IN THE CASE OF A SURETY

VNF:	FD 701: NO BASE UNIT REPORTED

IF A FILER SENDS QUANTITY/UOM (UNIT OF MEASURE) INFORMATION (REC FD02) FOR AN FDA LINE, THE UOM MUST BE ONE OF THE FDA BASE UNITS LISTED ON PAGE OG-31 OF THE CATAIR IF ONLY ONE QUANTITY/UOM IS SENT. IF MORE THAN ONE QUANTITY/UOM IS SENT, THE LAST ONE MUST BE A BASE UNIT AND MUST BE A VALID ONE.

ARE:	ACTION CODE REQUIRED

WHEN THE PROTESTANT TYPE IS "F" (FOREIGN) OR "O" (OTHER), PROTESTANT NAME AND ADDRESS MAY BE CORRECTED BY FILING AN AMENDMENT DURING ANY REMAINING PORTION OF THE FILING/AMENDMENT PERIOD, OR BY FILING AN ADDENDA AFTER THE FILING/ AMENDMENT PERIOD HAS CLOSED. A "C" MUST BE SUBMITTED IN THE ACTION CODE FIELD IN EITHER CASE. THE ACTION CODE FIELD CANNOT BE BLANK.

2J0:	SURETY INVALID OR NOT ON FILE

THIS REJECT MESSAGE REFERS TO THE SURETY REPORTED, IF ANY, FOR ANTIDUMPING OR COUNTERVAILING DUTY TRANSACTIONS. (MESSAGE 2AL IS THE EQUIVALENT ERROR MESSAGE FOR INVALID SURETY CODES REPORTED IN THE 10 RECORD). ADA OR CVD SURETY CODES ARE TRANSMITTED IN THE 35 REC, POS 49-51. SURETY CODES ARE REQUIRED ONLY WHEN THE BONDED INDICATOR FOR THE CASE NUMBER BEING REPORTED IS "1" (REPORTED IN POS 14 OF THE 35 REC). FOR ENTRIES WITH MULTIPLE ADD/CVD LINES, IF AT LEAST ONE LINE IS A BONDED CASE, THE SURETY CODE IN THE 35 RECORD IS REQUIRED. "000" IS THE MOST FREQUENTLY REPORTED INCORRECT SURETY CODE AND WILL CAUSE THIS MESSAGE TO BE ISSUED BY ACS. IF BLANKS ARE TRANSMITTED FOR THIS ELEMENT, MESSAGE 2AL WILL BE ISSUED.

LU2:	INVALID LUMBER PERMIT TYPE

THE SOFTWOOD LUMBER PERMIT TYPE IS TRANSMITTED IN THE 40 REC, POS 70-72. IT IS MANDATORY FOR MERCHANDISE ENTERED UNDER ONE OF THE FOLLOWING TARIFF NUMBER SUBHEADINGS OF 44071000, 44091020, OR 44091090 WITH PROVINCE OF ORIGIN CODES: XA, XC, XO, OR XQ. POS 70 OF THE 40 REC MUST CONTAIN EITHER "A", "B", "C", OR "D." IF POS 70 CONTAINS "A", "B", OR "C", THEN POS 71-72 MUST CONTAIN ZEROES OR SPACES. IF POS 70 CONTAINS "D", THEN POS 71-72 MUST CONTAIN A TWO-CHARACTER NUMERIC CODE THAT FALLS WITHIN THE RANGE OF 01 THROUGH 20, DEPENDING ON THE CALENDAR QUARTER DURING WHICH THE PERMIT IS ISSUED. SEE ADMIN MESSAGE 97-0579 FOR MORE INFORMATION ON LUMBER PERMITS.

002:	INVALID UNIT OF MEASURE

UNIT OF MEASURE INPUT IS NOT AN ACCEPTED ALPHA-NUMERIC CODE, OR IS FORMATTED INCORRECTLY. FOR AUTOMATED INVOICE INPUT PURPOSES, THE ABOVE MESSAGE RELATES TO DATA TRANSMITTED IN THE C33 REC, POS 19-21 OR 61-63. VALID UNITS OF MEASURE (AS LISTED IN APPENDIX C OF THE CATAIR) SHOULD BE REPORTED IN THESE TWO FIELDS; HOWEVER, ANY REASONABLE ABBREVIATION WILL BE ACCEPTED IN THE CI APPLICATION (I.E. "DOZ" OR "DZ" FOR DOZEN, ETC.) IF POS 19-21 OR 61-63 ARE BLANK, AND A QUANTITY IS TRANSMITTED IN POS 4-18, THIS ERROR MESSAGE WILL BE GENERATED.

4KN:	TARIFF (1) INVALID FOR COUNTRY

ONE POSSIBLE REASON FOR THIS ERROR MESSAGE IS WHEN A NON-CBI COUNTRY IS USE THE COUNTRY OF ORIGIN (REC 50, POS 6-7) FOR HS NUMBER 9802008040 (REC 50,POS 4-13) SINCE THIS HS NUMBER IS RESTRICTED TO CBI COUNTRIES.

2CI:	INBOND - INVALID CHECK DIGIT

ENTRY SUMMARY OR CARGO RELEASE INPUT TRANSACTIONS THAT REPORT PAPERLESS MASTER INBOND NUMBERS (THOSE STARTING WITH "V") MUST TRANSMIT A VALID MIB NUMBER, INCLUDING THE LAST DIGIT (CHECK DIGIT). IF THE LAST DIGIT IS NOT CORRECT, PRESUMING THAT THE FIRST 10 DIGITS ARE CORRECT, THIS ERROR MESSAGE WILL RESULT. THE FILER SHOULD RECONFIRM THE ENTIRE PAPERLESS MIB NUMBER WITH THE ISSUING CARRIER. NOTE: ERRORS IN THE CHECK DIGIT FOR AIR WAYBILLS USED AS INBOND NUMBERS OR FOR CONVENTIONAL (9 DIGIT ALL NUMERIC) INBOND NUMBERS WILL GENERATE ERROR MESSAGE 361.

 Next 10 >>Showing results 1 to 25 of 1405