ABI Error Message

VMH:	WHSE ENTRY SUMMARY IS LIQ/CANCLD

THE ORIGINAL WAREHOUSE ENTRY SUMMARY CITED IN THE WITHDRAWAL IS EITHER LIQUIDATED OR CANCELLED.

RBV:	WARNING - IMPTR ON REG'L SANCTION

FOR RECONCILIATION, THIS MEANS THAT THE IMPORTER IS ON REGIONAL SANCTION. THIS IS ONLY A WARNING FOR RECONCILIATION.

VLV:	DRAWBACK DUTY OR TAX REQUIRED

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER HAS LEFT THE AMOUNT OF DUTY AND TAX BLANK. FOR THE CLAIM TO BE VALID, THERE MUST BE EITHER DUTY OR TAX (OR BOTH) TRANSMITTED.

103:	ENTRY TYPE NOT AUTOMATED YET

THIS MESSAGE OCCURS IN THE 'EI' TRANSACTION WHEN AN ENTRY TYPE IS SENT IN THE 10 RECORD, POSITIONS 71-72 THAT IS NOT YET AUTOMATED. VALID ENTRY TYPE CODES ARE LISTED IN APPENDIX B OF THE CATAIR. IN APPENDIX B THESE CODES ARE DESIGNATED BY A '**'.

VMK:	INVALID DIST/PORT ON WHSE ENTRY

THE DISTRICT PORT ON 30 RECORD OF EI APPLICATION DID NOT MATCH THE DISTRICT/PORT OF THE WITHDRAWAL SUMMARY.

DDA:	NAFTA RECONCILIATION NOT FILED

A DRAWBACK CLAIM CANNOT BE FILED AGAINST AN IMPORT ENTRY THAT HAS BEEN FLAGGED FOR RECONCILIATION UNTIL SUCH TIME AS THE RECONCILIATION SUMMARY HAS BEEN FILED AND PAID. AT THE TIME OF LIQUIDATION, THIS MESSAGE IS ALSO USED TO ALERT THE USER THAT A NAFTA RECONCILIATION IS DUE ON A TYPE '01', '02', OR '06' ENTRY, BUT HAS NOT YET BEEN FILED. THIS MESSAGE IS OVERRIDEABLE AT LIQUIDATION.

VK2:	HLS: OP TYPE MUST BE 'C' OR 'M'

THE OPERAND TYPE CODE MUST BE 'C' FOR CONSTANT OF 'M' FOR MAP. WHEN 'C' THE OPERAND MUST BE A DISPLAY CONSTANT IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X ,....' WHEN 'M' THE OPERAND MUST BE A BMS MAP FIELD NAME.

VKS:	HLO: MAX 15 SORT FIELDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED FOR FORMULATE DEFAULT SORT CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

VK6:	HLS: BMS MAP FIELD NAME REQUIRED

A BMS MAP FIELD NAME OPERAND IS REQUIRED WITH OPERAND 'M'

VPY:	D31 RECORD NOT REQUIRED

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE D31 RECORD SPECIFIES THE ADD OR CVD BONDED OR PAYABLE DUTIES. IT IS SENT IN COMBINATION WITH A D11 RECORD WHICH DETAILS THE ADD OR CVD SUMMARY INFORMATION. THIS ERROR MESSAGE IS GENERATED IF A D31 RECORD IS SENT WITHOUT A MATCHING D11 RECORD.

AD2:	SUB INVALID WITHOUT HOUSE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). IF A SUB-HOUSE BILL IS TRANSMITTED IN THE HA REC, POS 39-50, A HOUSE BILL IS REQUIRED TO BE TRANSMITTED IN POS 27-38.

461:	PAY DUE DATE INVALID/CONFLICTING

THIS MESSAGE WILL RESULT IF THE FILER TRANSMITS A PAYMENT DUE DATE THAT IS AT LEAST ONE WORKING DAY IN THE FUTURE WHEN COMPARED TO THE ABI TRANSMISSION DATE. THE PAYMENT DUE DATE IS TRANSMITTED IN THE 30 RECORD, POS 54-59.

2AU:	BILL-OF-LADING REQUIRED WITH I.T.

WHEN AN INBOND NUMBER IS PROVIDED, THE CURRENT BILL OF LADING REQUIREMENTS ARE: IF THE MOT IS OCEAN (10 SERIES) OR AIR (40 SERIES), AN I.T. NUMBER ALWAYS REQUIRES A MASTER BILL OR AIR WAYBILL TO BE TRANSMITTED IN THE SUMMARY INPUT APPLICATION. IF THE MOT IS RAIL (20 SERIES) OR ROAD (30 SERIES), IF THE I.T. NUMBER IS A PAPERLESS MIB (V NUMBER), THE MASTER BILL FIELD IN THE 22 RECORD MUST BE FILLED IN OR THIS MESSAGE WILL RESULT. IF THE MOT IS RAIL OR ROAD, BUT THE I.T. NUMBER IS A CONVENTIONAL (9-DIGIT) NUMBER, THEN THE MASTER BILL FIELD MAY BE LEFT BLANK.

AP4:	AFR REQUEST DATA INCOMPLETE

WHEN FURTHER REVIEW IS APPLIED FOR AT TIME OF INITIAL FILING, THREE CRITERIA QUESTIONS MUST BE ANSWERED IN THE P16 RECORD. WHEN FURTHER REVIEW IS APPLIED FOR AT TIME OF INITIAL FILING OR BY AMENDMENT, THE THREE CRITERIA QUESTIONS MUST BE ANSWERED, AND ADDITIONAL NARRATIVE MUST BE SENT JUSTIFYING FURTHER REVIEW ACCORDING TO CFR 174.25(B)(3).

Q07:	STATEMENT FILER NOT = 'QT' FILER

FILER ON STATEMENT NOT EQUAL TO FILER GIVEN ON THE 'QT' RECORD. IF THE FILER CODE IS OMITTED ENTIRELY FROM POS 11-13 IN THE QT RECORD, ERROR MESSAGE Q03 WILL BE GENERATED. ONLY IF THE FILER CODE IN THE QT RECORD IS NOT AN EXACT MATCH TO THAT ON THE DATA FILE FOR THE STATEMENT NUMBER IN THE TRANSACTION WILL THIS ERROR MESSAGE BE GENERATED.

EJ3:	C06-C49 PKGING UNITS MUST MATCH

A PACKAGING UNIT ON A C49 ABI CI TRANSMISSION MUST MATCH A PACKAGING UNIT LISTED ON A C06 OR C07 TRANSACTION. AS OF 1995, THIS MESSAGE NO LONGER APPLIES, AS THE REQUIREMENT THAT THE C49 RECORD PACKAGING IDENTIFY MATCH THE C06 OR C07 IDENTITY HAS BEEN REMOVED.

DK9:	WARNING - WPN PRIV NOT ON FILE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE AND IS A "WARNING" NOT A FATAL ERROR THAT APPEARS IF THE CLAIM DATE IS ON OR AFTER 4/6/1998 AND THERE IS NO WAIVER OF PRIOR NOTICE SPECIAL PRIVILEGE RECORD ON FILE IN ACS. THIS WILL OCCUR IF THE CLAIMANT HAS NOT RE-APPLIED FOR THEIR PRIVILEGES, OR IF THEY HAVE RE-APPLIED, BUT HAVE NOT YET BEEN PUT INTO THE FILE. CLAIMANTS HAVE UNTIL 4/6/1999 TO RE-APPLY. AT THAT TIME (OR SUCH OTHER LATER TIME TO BE DETERMINED BASED ON NEED), THIS ENTRY WILL BECOME A FATAL ERROR.

2G0:	DUPLICATE IT/AWB/BL NUMBER

THIS MESSAGE APPLIES TO ENTRY SUMMARY INPUT (TRANSACTION ID = EI). THIS MESSAGE OCCURS WHEN A FILER SENDS MORE THAN ONE IT, AIRWAY BILL OR BILL OF LADING AND TWO OR MORE ARE DUPLICATES AND NOT DIFFERENTIATED BY A DIFFERENT B/L OR HOUSE BILL (IN THE CASE OF AN IT) OR DIFFERENT HOUSE OR SUBHOUSE BILL (IN THE CASE OF A AWB OR B/L). THE MOST COMMON CAUSE IS WHEN A FILER SENDS THE SAME BILL OF LADING/HOUSE BILL AND TRIES TO DIFFERENTIATE BY SENDING DIFFERENT QUANTITIES.

JEA:	ENTRY SUMMARY MUST BE ABI

NON-ABI SUMMARY WAS INPUT AGAINST AN ABI SELECTIVITY RECORD.

0IJ:	ULT CON ENTRY SUMMARY MISMATCH

THE ENTRY ULTIMATE CONSIGNEE DOES NOT MATCH THE SELECTIVITY RECORD. PLEASE CORRECT THE SELECTIVITY RECORD IF IT IS INCORRECT.

AET:	PIRP NUMBER MISSING OR INVALID

THIS MESSAGE IS GENERATED WHEN THE PIRP NUMBER IN THE EI 43 RECORD, POSITIONS 3-8 IS MISSING OR INVALID.

1GF:	ENTRY RELEASE ON FILE

INFORMS OPERATOR THAT RELEASE IS ON FILE FOR ENTRY NUMBER

58H:	QUOTA NOT PERMITTED ON STATEMENTS

OT PERMITTED ON STATEMENTS

RBY:	DUPLICATE RECON PORT CODE

DUPLICATE RECONCILIATION PORT LOCATION CODE GIVEN.

0M9:	INVALID ISO CODE FOR MFG ID

THE TWO CHARACTER ISO CODE USED IN THE MANUFACTURER IDENTIFICATION (MID) FIELD ON SUMMARY OR CARGO RELEASE INPUT TRANSMISSIONS MUST REPRESENT A VALID COUNTRY WHICH IS LISTED ON THE COUNTRY CODE DATABASE. IF THE CODE IS NOT ON THAT DATABASE, THIS ERROR MESSAGE WILL RESULT. THE MID IS TRANSMITTED IN THE SUMMARY INPUT IN REC 60, POS 43-58 AND IN THE CARGO RELEASE INPUT IN REC H5, POS 18-32. IF THE ENTRY INVOLVES A CANADIAN MID, THE ISO CODE MUST BE ONE OF THE 10 CANADIAN PROVINCE CODES (X, FOLLOWED BY AN ALPHA CHARACTER). ERROR MESSAGE AAM WILL BE GENERATED FOR INCORRECT CANADIAN MIDS. FOR AUTOMATED INVOICE (APPL CI), THE RECORDS AFFECTED ARE THE C01 RECORD, THE C08 RECORD, AND THE C11 RECORD.

 Next 10 >>Showing results 1 to 25 of 1405