ABI Error Message

AAZ:	ADD/CVD DUTY COMP MISMATCH

THIS MESSAGE OCCURS WHEN THE COUNTERVAILING DUTY (ABI REC 60, POS 3-12) OR ANTIDUMPING DUTY (ABI REC 60, POS 33-42) DOES NOT AGREE WITH WHAT THE ABI SYSTEM HAS DETERMINED THE DUTY IS. CHECK TO SEE IF A SPECIFIC DEPOSIT VALUE HAS BEEN SENT IN ABI REC 40 POS 28-37 (ANTIDUMPING DUTY) OR POS 38-47(COUNTERVAILING DUTY) THEN CHECK THE CVD RATE IN ABI REC 60, POS 69-73 OR THE ADD RATE IN ABI REC 60, POS 74-78.

LU1:	LUMBER PERMIT/ORIG CNTRY INVALID

LUMBER PERMIT CANNOT BE ENTERED FOR COUNTRY OF ORIGIN OF 'CA' .

VDW:	EXPORT DATE REQ/FTZ QUOTA PROCESS

BOTH AN EXPORT DATE AND A TEXTILE EXPORT DATE ARE REQUIRED FOR A FOREIGN TRADE ZONE (FTZ) ENTRY INTO THE UNITED STATES OF QUOTA TEXTILE MERCHANDISE. IF NON-TEXTILE QUOTA MERCHANDISE, AN EXPORT DATE IS REQUIRED.

2J0:	SURETY INVALID OR NOT ON FILE

THIS REJECT MESSAGE REFERS TO THE SURETY REPORTED, IF ANY, FOR ANTIDUMPING OR COUNTERVAILING DUTY TRANSACTIONS. (MESSAGE 2AL IS THE EQUIVALENT ERROR MESSAGE FOR INVALID SURETY CODES REPORTED IN THE 10 RECORD). ADA OR CVD SURETY CODES ARE TRANSMITTED IN THE 35 REC, POS 49-51. SURETY CODES ARE REQUIRED ONLY WHEN THE BONDED INDICATOR FOR THE CASE NUMBER BEING REPORTED IS "1" (REPORTED IN POS 14 OF THE 35 REC). FOR ENTRIES WITH MULTIPLE ADD/CVD LINES, IF AT LEAST ONE LINE IS A BONDED CASE, THE SURETY CODE IN THE 35 RECORD IS REQUIRED. "000" IS THE MOST FREQUENTLY REPORTED INCORRECT SURETY CODE AND WILL CAUSE THIS MESSAGE TO BE ISSUED BY ACS. IF BLANKS ARE TRANSMITTED FOR THIS ELEMENT, MESSAGE 2AL WILL BE ISSUED.

VGY:	FEI FOUND ON ACS

THIS MESSAGE OCCURS WHEN A FILER QUERIES ABI TO DETERMINE WHETHER AN FDA ESTABLISHMENT NUMBER (FEI) IS ON FILE. IT IS NOT AN ERROR MESSAGE. ALL TWELVE NUMBERS MUST BE USED INCLUDING THE LEADING ZEROS. THE FILER USES THE FDPP-10 RECORD SHOWN ON PAGE OGQ-14 OF THE CATAIR WITH A "Q" IN THE ACTION CODE. THIS MESSAGE IS RETURNED WHEN THE FEI NUMBER QUERIED IS FOUND IN ACS.

RB9:	RECON/IMPORT SURETY MISMATCH

THE SURETY CODE ON THE RECONCILIATION SUMMARY DOES NOT MATCH THE SURETY CODE ON ONE OR MORE OF THE ASSOCIATED IMPORT ENTRIES. ALL IMPORT ENTRIES AND THE RECON SUMMARY MUST HAVE THE SAME SURETY CODE. (IF THE IMPORTER NUMBER IDENTIFIED IN THE RECON AND IMPORT ENTRIES HAS CHANGED SURETY COMPANIES DURING THE PERIOD COVERED BY THE RECON ENTRY, IT WILL BE NECESSARY FOR THE FILER TO FILE AT LEAST TWO RECON ENTRIES. THIS IS THE ONLY WAY TO MAINTAIN THE CORRELATION BETWEEN THE SURETY SHOWN IN THE R10 REC, POS 32-34 AND THE SURETY IDENTIFED ON EACH IMPORT ENTRY).

381:	ORIGIN COUNTRY INVALID - UNKNOWN

INVALID COUNTRY OF ORIGIN - NOT ON FILE. FOR THE EI APPLICATION, REC 40,POS 6-7 IS BLANK OR CONTAINS A TWO CHARACTER ISO CODE THAT IS NOT PRESENT IN THE ACS COUNTRY CODE FILE, THIS MESSAGE WILL RESULT.

VMV:	WHSE WTHDR REQUIRES PYMNT BY ACH

A TYPE 31, 32, 34 OR 38 THAT'S ON STATEMENT MUST BE PAID VIA ACH.

401:	CBI CLAIM INVALID FOR THIS TARIFF

THIS MESSAGE ADVISES THE FILER THAT THE TARIFF NUMBER ON THE REJECTED LINE HAS A CBI CLAIM (SPI = "E"), BUT THE TARIFF FILE RECORD FOR THE TARIFF NUMBER IS NOT CODED FOR THIS SPECIAL PROGRAM.

89T:	HMF REQUIRED

THIS ENTRY REQUIRES A HARBOR MAINTENANCE FEE BASED UPON MOT OF "12".

8WM:	VOYAGE/FLIGHT NUMBER INVALID

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSMISSION (APPLICATION LN). THE VOYAGE/FLIGHT NUMBER MUST BE A MINIMUM OF THREE CHARACTERS IN LENGTH. FOR OCEAN SHIPMENTS (MOT 10/11/12), ANY COMBINATION OF NUMBERS AND LETTERS IS PERMITTED FOR THE VOYAGE NUMBER. IF THE VOYAGE NUMBER HAS A LEADING SPACE AT THE BEGINNING OF THE ELEMENT IN THE L1 REC, POS 36-40, THIS MESSAGE WILL BE GENERATED EVEN IF THE REMAINING POSITIONS ARE FILLED WITH A MINIMUM OF THREE ALPHA-NUMERIC CHARACTERS. **NOTE** - FOR AIR SHIPMENTS, LEADING SPACES OR A FLIGHT NUMBER WITH FEWER THAN 3 NUMERIC CHARACTERS WILL GENERATE ERROR MESSAGE 10R "INVALID FLIGHT NUMBER FORMAT".

BR2:	ORIGINAL TAX MISMATCH (R90:R20)

THE TOTAL ORIGINAL TAX GIVEN BY THE FILER IN THE RECON'S 'R90' RECORD DOES MATCH THE SUM OF THE ORIGINAL TAX FROM ALL OF THE 'R20' RECORDS. THIS ONLY APPLIES TO ENTRY-BY-ENTRY RECONCILIATION.

DKW:	DUPLICATE TARIFF

IN THE AUTOMATED DRAWBACK MODULE EACH TARIFF NUMBER GIVEN ON A CLAIM CAN ONLY APPEAR ONCE. THIS ERROR WILL OCCUR IF A NUMBER HAS BEEN USED MORE THAN ONCE ON THE CLAIM AS SENT IN THE ABI 'D20' RECORDS.

07A:	INVALID CROSS DIST PRCSSING PORT

THIS MESSAGE OCCURS IN AN 'HN' BORDER CARGO RELEASE TRANSACTION WHEN THE DISTRICT/PORT OF ENTRY SENT IN THE 01 RECORD, POSITIONS 4-7 IS DIFFERENT FROM THE PROCESSING DISTRICT/PORT SENT THE THE 'B' APPLICATION CONTROL RECORD, POSITIONS 4-7. THIS DESPITE THE WORDING IN THE DESCRIPTION BLOCK FOR THE DISTRICT/PORT OF ENTRY IN RECORD IDENTIFIER 01, PAGE BCR-4 OF THE CATAIR WHICH STATES "GENERALLY, THE DISTRICT CODE IS THE SAME AS THE DISTRICT CODE CONTAINED IN THE BLOCK CONTROL HEADER RECORD (RECORD IDENTIFIER B); HOWEVER, THE PORT CODE CAN BE DIFFERENT" THIS DOES NOT APPEAR TO BE TRUE. THE DDPP'S MUST BE THE SAME OR THIS REJECT OCCURS.

VLP:	DRAWBACK GOVT CLAIM INVALID

THIS MEANS THE DRAWBACK FILER HAS USED A CODE OF OTHER THAN 'Y' ("YES") OR 'N' ("NO" ) FOR WHETHER THIS IS A GOVERNMENT CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR A SPACE ("NO") OR '1' ("YES") FOR ABI.

689:	I.T. NUMBER WITH NO I.T. DATE

THIS MESSAGE INDICATES THAT THE I.T. NUMBER, TRANSMITTED IN THE SUMMARY INPUT IN THE 22 REC, POS 3-14, WAS NOT ACCOMPANIED AN APPROPRIATE DATE OF CREATION OF THE I.T. THIS DATE IS MANDATORY WHEN THE I.T. NUMBER IS TRANSMITTED. THE DATE IS TRANSMITTED IN THE 22 REC, POS 64-69.

EJ3:	C06-C49 PKGING UNITS MUST MATCH

A PACKAGING UNIT ON A C49 ABI CI TRANSMISSION MUST MATCH A PACKAGING UNIT LISTED ON A C06 OR C07 TRANSACTION. AS OF 1995, THIS MESSAGE NO LONGER APPLIES, AS THE REQUIREMENT THAT THE C49 RECORD PACKAGING IDENTIFY MATCH THE C06 OR C07 IDENTITY HAS BEEN REMOVED.

EJY:	UNIT OF MEASURE REQUIRED

IF THE FILER SENDS A QUANTITY IN THE SUMMARY INPUT (EI APPLICATION, REC 22, POS 51-58) AND DOES NOT ALSO INCLUDE A UNIT OF MEASURE (REC 22, POS 51-58) THIS ERROR MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE CARGO RELEASE INPUT (HI APPLICATION, REC HA, POS 51-58 FOR THE UNIT OF MEASURE). IN THE AUTOMATED INVOICE TRANSACTION (APPLICATION CI), THIS ERROR MESSAGE IS SOMEWHAT MISLEADING. IF THE C34 RECORD IS TRANSMITTED, THE FIRST QUANTITY FIELD, POS 4-18, MUST BE GREATER THAN ZERO. THE FIRST UNIT OF MEASURE IN POS 19-21 IS OPTIONAL. IF THE SECOND UNIT OF MEASURE, POS 37-39, IS TRANSMITTED WITHOUT A SECOND QUANTITY IN POS 22-26, THIS ERROR MESSAGE IS GENERATED. A BETTER MESSAGE WOULD BE "UOM NOT ALLOWED WITH QUANTITY."

ASH:	ENTRY WITHDRAWAL REQ. N/A

ENTRY WITHDRAWAL REQUEST NOT APPLICABLE.

VAA:	FC 740:INV IMPORT CONDTN NBR

THE IMPORT CONDITION NUMBER IS SENT IN THE FC01 RECORD, POSITIONS 5-6. A CODE OF 01 - 08 IS SENT IDENTIFYING THE FCC IMPORT CONDITION. ANY OTHER CODES WILL BE REJECTED.  SEE PAGE OGA-25, CATAIR.

EIT:	LOCATION CODE REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 REC, POS 11-15, PROVIDES A FIELD FOR THE IDENTIFICATION OF A CODED LOCATION. THE DATA IN THIS ELEMENT DEPENDS ON THE LOCATION CODE IDENTIFIER, TRANSMITTED IN THE C13 REC, POS 9-10.IF THERE IS A VALID LOCATION CODE IDENTIFIER TRANSMITTED IN POS 9-10, THE CODED LOCATION CANNOT BE BLANK OR THIS MESSAGE WILL BE GENERATED. THIS MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

95E:	ENTRY NOT ELIGIBLE FOR RECONCILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). ONLY THREE ENTRY TYPES ARE ELIGIBLE FOR THE RECONCILIATION PROTOTYPE AS OF OCT 1998. THE THREE TYPES ARE "01", "02", AND "06". IF ANY OTHER ENTRY TYPE IS TRANSMITTED IN THE 10 REC, POS 71-72, THIS ERROR MESSAGE WILL RESULT.

DLI:	PETROL SCHD B MUST BE 8 OR 10 DGT

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. IF THE PETROLEUM INDICATOR IS A '1' VIA ABI, MEANING THAT THIS IS A PETROLEUM CLAIM, THE SCHEDULE B NUMBERS MUST BE REPORTED VIA THE ABI 'D25' RECORDS AT EITHER THE 8 OR 10 DIGIT LEVELS. FOR PETROLEUM, THE 6 DIGIT REPORTING LEVEL IS NOT ACCEPTABLE.

AR2:	NOTIFY SUB DATA NOT APPLICABLE

NOTIFY SUBSTITUTE TYPE NOT APPLICABLE.

391:	CLAIM INVALID FOR EXPORT COUNTRY

CERTAIN SPECIAL PROGRAMS (GSP, FOR ONE) REQUIRE THAT THE EXPORT COUNTRY BE ELIGIBLE FOR THE PROGRAM AS WELL AS THE ORIGIN COUNTRY. IF THE EXPORT COUNTRY IS NOT ELIGIBLE FOR  THE SPECIAL PROGRAM, THIS ERROR MESSAGE WILL BE GENERATED.

 Next 10 >>Showing results 1 to 25 of 1405