ABI Error Message

VNE:	OGA/LINE RLSE INDICATOR INVALID

THE ONLY LINE RELEASE INDICATOR ALLOWED IN REC 10, POS 80 IS A "1".IF IT DOES NOT APPLY THEN THE FILER SHOULD SPACE FILL THIS POSITION.

8VO:	INVALID QUANTITY

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE L3 RECORD IS TRANSMITTED, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER IS REQUIRED, ALONG WITH THE MANIFESTED QUANTITY AND UNIT OF MEASURE. THE MANIFESTED QUANTITY MUST BE GREATER THAN ZERO. IF ZERO IS TRANSMITTED, THIS ERROR MESSAGE WILL BE GENERATED. IF EITHER THE MANIFEST QUANTITY OR UNIT OF MEASURE FIELDS ARE LEFT BLANK, ERROR MESSAGE 8VH WILL RESULT. NOTE: THE QUANTITY FIELD IN THE LN APPLICATION IS A NUMERIC FIELD AND MUST CONTAIN LEADING ZEROS. IF THE FIELD IS SPACE FILLED EXCEPT FOR THE ACTUAL QUANTITY, THIS REJECT MESSAGE WILL BE ISSUED.

AE1:	ZIP CODE NOT ALLOWED FOR MEXICO

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADD 5106" TRANSACTION, APPLICATION IDENTIFIER TI. IF THE FILER IS REQUESTING A CUSTOMS-ASSIGNED NUMBER FOR A FOREIGN BASED IMPORTER AND THE COUNTRY OF THE IMPORTER IS MEXICO, NO ZIP OR POSTAL CODE IS PERMITTED. IF THE FILER TRANSMITS A POSTAL CODE IN THE T2 REC, POS 70-78, THIS MESSAGE WILL BE GENERATED.

8DI:	INVALID ABI BROKER

THIS MESSAGE OCCURS IN THE AII MODULE. THE ENTRY FILER IS NOT AUTHORIZED IN THE DISTRICT/PORT FOR THE TRANSACTION.

APC:	USCS PROTEST NBR NOT ON FILE

THE VALUE ASSIGNED IN THE PROTEST NUMBER FIELD IS NOT A VALID CUSTOMS ASSIGN PROTEST NUMBER. THE CUSTOMS ASSIGNED PROTEST NUMBER IS ASSIGNED AT INITIAL PROTEST FILING AND IS REQUIRED FOR ALL SUBSEQUENT (AMENDMENT, ADDENDA & SERVICE REQUEST) FILINGS FOR THAT PROTEST.

VHQ:	DT HS7: MAKE REQUIRED

THIS ERROR MESSAGE OCCURS IN THE DOT INTERFACE. THE MAKE (NAME OF COMPANY THAT MANUFACTURED VEHICLE) SENT IN POSITIONS 5-19 OF THE DT02 RECORD IS MANDATORY IF BOXES 03, 05 OR

1L5:	WARNING-NO BOND FOR IMPORTER

THIS MESSAGE IS GENERATED IN RESPONSE TO LINE RELEASE OUTPUT RECORD CREATION. IT IS USUALLY ACCOMPANIED BY ERROR 628 (MISSING/INVALID IMPORTER NUMBER). IF THE BOND IS ASSOCIATED WITH A PROPERLY FORMATTED IMPORTER NUMBER (IN EIN, SSN, OR USCS ASSIGNED NUMBER FORMAT), AND THE IMPORTER NUMBER FORMAT IS NOT IN THE CORRECT FORMAT, THE BOND WILL CONSEQUENTLY BE NOT ON FILE. CORRECTION OF THE IMPORTER NUMBER ERROR WILL USUALLY RESOLVE THE NO BOND ERROR, PROVIDED AN ACTUAL CONTINUOUS BOND EXISTS.

VNI:	FD 701: MLTPLE BASE UNITS INVALID

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 92-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT, THE BASE UNIT MUST BE IN THE LAST POSITION. THE FILER CANNOT SEND MORE THAN ONE BASE UNIT. BASE UNITS ARE LOCATED IN THE CATAIR, PAGE OGA-31. TO SOLVE THIS ERROR, THE FILER MUST USE THE BASE UNIT AND A CONTAINER CODE (S) FOUND ON PAGES OGA 32-33, CATAIR.

16G:	TARIFF NO. MISSING OR UNRELATED

THIS ERROR MESSAGE HAS OCCURRED IN WATCH ENTRIES WHERE THERE ARE MORE THAN TARIFF NUMBERS INVOLVED AND ONE OF THE TARIFF NUMBERS IS NOT RELATED. SEE TARIFF FILE TO DETERMINE PROPER COMBINATIONS.

628:	MISSING/INVALID IMPORTER NUMBER

THIS MESSAGE OCCURS DURING THE CREATION OF LINE RELEASE OUTPUT RECORDS. THE IMPORTER OF RECORD MUST BE IN ONE OF THREE VALID FORMATS, WHICH ARE OUTLINED ON PAGE LRL-5 OF THE CATAIR. IF ONE OF THE VALID FORMATS IS NOT USED, THIS ERROR MESSAGE WILL RESULT.

10S:	SURETY CODE REVOKED

THIS ERROR OCCURS WHEN THE ABI FILER'S SURETY CODE HAS BEEN REVOKED.

04F:	PC: ENTER VESSEL NAME

ENTRY IS PAIRED CITIES. VESSEL NAME IS BLANK. VESSEL NAME IS REQUIRED.

169:	INVALID COUNTRY CODE

THE COUNTRY CODE IS NOT ON FILE. IN ABI, THIS ERROR MESSAGE CAN RESULT WHEN THE FILER TRANSMITS APPLICATION EI (ENTRY SUMMARY) AND INCLUDES A 42 RECORD BUT OMITS THE SUPPLIER ID NUMBER. THE FIRST TWO CHARACTERS OF THIS RECORD REPRESENT THE ISO COUNTRY CODE. IF THE SUPPLIER ID IS BLANK, ABI INTERPRETS THIS AS AN INVALID ISO CODE AND GENERATES THIS ERROR MESSAGE.

89T:	HMF REQUIRED

THIS ENTRY REQUIRES A HARBOR MAINTENANCE FEE BASED UPON MOT OF "12".

VN8:	FLR CANNOT VARY IN B=>Y BLOCK

THIS ERROR INDICATES THAT THE FILER CODE SENT ON THIS CLAIM OR CLAIMS DIFFERS FROM THAT OF THE FILER SENDING THE DATA. THIS ERROR RARELY OCCURS WITH THE DISKETTE, SINCE USCS IS SUBMITTING THE DATA FOR THE FILER. IT CAN OCCUR WITH ABI, FOR EXAMPLE, WHERE A FILER MAY BE SENDING DATA FOR THEIR 3901 OFFICE AND INADVERTENTLY INCLUDES A 5301 OFFICE CLAIM. FOR RECONCILIATION, THIS MEANS THAT THE FILER IN THE 'B' RECORD DIFFERS FROM THE FILER IN THE 'R10' RECORD.

ARB:	SURETY CERTIFICATION REQ'D

WHEN THE PROTESTANT IS A SURETY, THE FOLLOWING DECLARATION MUST BE CERTIFIED TO BE TRUEBY SUBMITTING 'Y' IN THE SURETY CERTIFICATION FIELD: "THIS PROTEST IS NOT BEING FILED COLLUSIVELY TO EXTEND ANOTHER AUTHORIZED PERSON'S TIME TO PROTEST."

AFH:	ADD BOND AMT/TYPE INVALID; 35 REC

THE ADD BOND TYPE IN REC 35, POS 14 MUST BE 0 OR 1. THE USE OF ANY OTHER NUMERIC, SPACE OR SPECIAL CHARACTER WILL RESULT IN THIS ERROR MESSAGE. IF THE BONDED ANTIDUMPING DUTY AMOUNT (35 REC, POS 3-13) DOES NOT AGREE WITH THE ANTIDUMPING DUTY AMOUNT IN THE 60 REC, POS 33-42, THIS ERROR MESSAGE WILL BE GENERATED. IF BOTH AMOUNTS AGREE, BUT DO NOT EQUAL THE CALCULATED ANTIDUMPING DUTY AMOUNT, AS DETERMINED BY ACS, ERROR MESSAGE AAZ "ADD/CVD DUTY COMP MISMATCH" WILL RESULT. NOTE-- IF THE CASE BEING REPORTED HAS A DUTY RATE OF 0.00 PERCENT AND A BOND/ CASH INDICATOR OF "B", ABI WILL NOT ACCEPT THE BONDED INDICATOR IN THE 35 REC. THE FILER SHOULD TRANSMIT EITHER A BLANK IN POS 14 OR A ZERO.

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

2DF:	CARR CODE REQ FOR MOT 10,11,40

ENTRY SUMMARY TRANSMISSIONS FOR CARGO ARRIVING IN THE UNITED STATES BY AIR OR OCEAN (MOT 10, 11, 40, 41) MUST INCLUDE THE APPROPRIATE CODE REPRESENTING THE IMPORTING AIR OR OCEAN CARRIER. THE CARRIER CODE IS TRANSMITTED IN THE SUMMARY IN THE 30 REC, POS 73-76 (FOR THE FOUR CHARACTER OCEAN CARRIER CODE) AND IN THE 30 REC, POS 73-74 (FOR THE TWO CHARACTER AIR CARRIER CODE). THIS CODE IS REQUIRED WHETHER OR NOT THE ENTRY SUMMARY INPUT CONTAINS A CARGO CERTIFICATION REQUEST FLAG. IF THE FILER DOES NOT TRANSMIT THE CARRIER CODE AS DESCRIBED ABOVE, THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL ALSO RESULT IF THE CARRIER CODE IS OMITTED FROM THE CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION IDENTIFIER HI) FOR AIR OR OCEAN MODES OF TRANSPORTATION.

VPD:	WHSE PROCESS TYPE INVALID

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE WAREHOUSE ENTRY PROCESS TYPE MUST BE SENT IN THE D10 RECORD, POSITION 46 IF THE CLAIM TYPE INDICATOR IN THE D01 RECORD EQUALS 1. VALID WAREHOUSE PROCESSING TYPE CODES ARE: 1 EQUALS MANIPULATION, 2 = SMELTING OR MANUFACTURING.

EJ8:	TRANSACTION REJECTED-EXAM PENDING

IN ABI CI, IF SSA01-SELECTIVITY-TYP EQUALS '4' '5' OR '7', AN ASSOCIATED NVOICE CANNOT BE REPLACED OR DELETED. THE ABOVE MESSAGE MEANS THAT THE FILER HAS TRANSMITTED AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI) FOR AN ENTRY THAT IS CURRENTLY IN SOME FORM OF EXAMINATION STATUS. WHILE THE EXAMINATION STATUS ATTACHES TO THE ENTRY ASSOCIATED WITH THE INVOICE IN QUESTION, A RETRANSMISSION OF THE INVOICE DATA IS NOT PERMITTED.

4BO:	REMOTE ENTRY-CANNOT DEL FROM STMT

A REMOTE-FILE ENTRY CANNOT BE REMOVED FROM ABI STATEMENT.

VMW:	WHSE WITHDRAWAL ON FILE

WAREHOUSE WITHDRAWAL ENTRIES ARE NOT ELIGIBLE FOR CARGO SELECTIVITY BECAUSE THE SUBJECT MERCHANDISE HAS BEEN PREVIOUSLY SUBJECTED TO ADMISSIBILITY REVIEW WHEN THE ORIGINAL WAREHOUSE ENTRY (TYPE 21 OR 22) WAS PROCESSED. HENCE, IF THE FILER'S WAREHOUSE WITHDRAWAL INPUT CONTAINS A CARGO CERTIFICATION FLAG ("1" IN POS 38 OF THE 30 REC), THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL USUALLY BE PRECEDED BY THE LETTERS "CERT" INDICATING THAT THIS REJECTION IS RELATED TO THE DENIAL OF CARGO RELEASE CERTIFICATION.

DKX:	D20 RECORD IS REQUIRED

THIS ERROR MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE IF ANY IMPORT ENTRY CITED ON THE CLAIM HAS AN ENTRY DATE ON OR AFTER 4/6/1998. AS OF THAT DATE, THE REPORTING OF TARIFF NUMBERS IS REQUIRED ON THE CLAIM. AT LEAST ONE ABI 'D20' IMPORT TARIFF RECORD IS REQUIRED IF ANY IMPORT ENTRY IS DATED ON OR AFTER 4/6/1998.

VK5:	HLS:HEX CONSTANT FORMAT INVALID

A HEXADECIMAL CONSTANT VALUE MUST BE EXPRESSED AS X'....' EVEN NUMBERS OF HEXADECIMAL DIGITS 0 THRU 9 A A THRU F ARE REQUIRED.

 Next 10 >>Showing results 1 to 25 of 1405