ABI Error Message

AHZ:	DEMO FILER MUST BE IN RDP 8888

THE 'B' RECORD DDPP MUST BE '8888' FOR AN "X" FILER CODE.

VMW:	WHSE WITHDRAWAL ON FILE

WAREHOUSE WITHDRAWAL ENTRIES ARE NOT ELIGIBLE FOR CARGO SELECTIVITY BECAUSE THE SUBJECT MERCHANDISE HAS BEEN PREVIOUSLY SUBJECTED TO ADMISSIBILITY REVIEW WHEN THE ORIGINAL WAREHOUSE ENTRY (TYPE 21 OR 22) WAS PROCESSED. HENCE, IF THE FILER'S WAREHOUSE WITHDRAWAL INPUT CONTAINS A CARGO CERTIFICATION FLAG ("1" IN POS 38 OF THE 30 REC), THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL USUALLY BE PRECEDED BY THE LETTERS "CERT" INDICATING THAT THIS REJECTION IS RELATED TO THE DENIAL OF CARGO RELEASE CERTIFICATION.

41D:	WARNING TSUSA EFFECT. W/IN 3 WKS.

THIS MESSAGE IS A WARNING MESSAGE, NOT A REJECTION. IT USUALLY REFERS TO THE FACT THAT THE ENTRY SUMMARY CONTAINS A NEWLY CREATED TARIFF NUMBER THAT HAS GONE INTO EFFECT WITHIN  THE LAST THREE CALENDAR WEEKS. IT HAS NO BEARING ON THE PROCESSING OF THE CARGO RELEASE TRANSACTION.

"2G8:

WATERWAY FEE INVALID FOR RECORD

THIS ERROR MESSAGE OCCURS WHEN THE WATERWAY FEE (CLASS CODE 501), WHICH IS A LINE LEVEL FEE (REPORTED IN THE 62 RECORD ON THE SUMMARY INPUT) IS TRANSMITTED IN THE 34 RECORD AS AN ENTRY LEVEL FEE. THERE ARE CURRENTLY ONLY THREE ENTRY LEVEL FEES: THE INFORMAL FEE (CLASS CODE 311), THE DUTIABLE MAIL ENTRY FEE (CLASS CODE 496), AND THE MANUAL SURCHARGE FEE (CLASS CODE 500).

04G:	PC: MOT=AIR BUT V/F/T MISSING

ENTRY IS PAIRED CITIES, CARRIER CODE IS INVALID, MODE OF TRANSPORTATION IS AIR, BUT V/F/T IS MISSING.

4GP:	ONLY COUNTRY VALID FOR OPTION C

THIS MESSAGE IS GENERATED IN REPLY TO AN ABI QUOTA QUERY. IF THE FILER REQUESTS ALL VISA RECORDS FOR A GIVEN COUNTRY OF ORIGIN (OPTION C IN POS 25 OF THE U1 INPUT RECORD), THE INPUT RECORD CANNOT ALSO REQUEST INFORMATION FOR A GIVEN VISA NUMBER, TARIFF NUMBER OR CATEGORY NUMBER IN THE SAME U1 INPUT RECORD

52Z:	ENTRY/LINE SEQUENCE REJECTED

REFER TO ADMINISTRATIVE MESSAGE 98-0236, DATED 032098. IN SOME CASES THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) WAS CAUSING DATA BASE ERRORS WHEN THE NUMBER OF (I7) ENTRY NUMBER/LINE ITEM SEQUENCE RECORDS EXCEEDED THE LIMIT SET BY THE PROGRAM FOR A PARTICULAR NAME & ADDRESS I3 AND I4 RECORD SET. ALSO, IN SOME REJECT SITUATIONS THE ERROR MESSAGE "524 TRANSACTION DATA REJECTED" WAS DISPLAYING ERRONEOUSLY IN THE IB OUTPUT MESSAGES WHEN THE ENTIRE (IJ) APPLICATION WAS NOT REJECTED. TO ELIMINATE THE ABOVE SITUATIONS AND TO PROVIDE MORE ACCURATE INFORMATION WHEN ERRORS ARE DETECTED IN THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) TRANSMISSIONS, THIS ERROR MESSAGE AND 52Y "MAXIMUM (I7) RECORDS EXCEEDED" ARE GENERATED. BOTH THE 52Y AND 52Z MESSAGES WILL APPEAR AS (IB) OUTPUT RECORDS WHEN CUSTOMS DETERMINES THAT THE INFORMATION TRANSMITTED CANNOT BE ADDED TO THE DATABASE AS REQUESTED BY AN ABI FILER.

630:	INVALID MODE OF TRANSPORTATION

IN ORDER FOR CARGO CERTIFICATION TO BE PERFORMED, THE MODE OF TRANSPORTATION (MOT) FIELD MUST BE COMPLETED. INFORMAL ENTRY SUMMARY TRANSACTIONS (APPLICATION IDENTIFIER EI) WHICH REQUEST CARGO CERTIFICATION, BUT DO NOT PROVIDE THE MOT IN THE 20 REC, POS 28-29, WILL RECEIVE THIS ERROR MESSAGE. SIMILARLY, SEPARATE CARGO RELEASE INPUT TRANSACTIONS (APPLICATION IDENTIFIER HI) WHICH OMIT THE MOT (H1 REC, POS 32-33) WILL ALSO RECEIVE THIS ERROR MESSAGE, WHETHER OR NOT THE RELEASE CERTIFICATION CODE (H1 REC, POS 34) IS ALSO TRANSMITTED. (INFORMAL ENTRY SUMMARY INPUT WHICH DOES NOT REQUEST CARGO CERTIFICATION WILL BE ACCEPTED WITHOUT THE MOT).

94J:	EXPECTED UNH SEGMENT NOT FND

THIS IS A UN/EDIFACT SYNTAX ERROR MESSAGE. IT INDICATES THAT THE UNH MESSAGE HEADER IS MISSING.

94Q:	ERROR IN BGM SEGMENT

EDIFACT SYNTAX ERROR. AN ERROR IN THE BGM (BEGINNING OF MESSAGE) SEGMENT HAS OCCURRED.

401:	CBI CLAIM INVALID FOR THIS TARIFF

THIS MESSAGE ADVISES THE FILER THAT THE TARIFF NUMBER ON THE REJECTED LINE HAS A CBI CLAIM (SPI = "E"), BUT THE TARIFF FILE RECORD FOR THE TARIFF NUMBER IS NOT CODED FOR THIS SPECIAL PROGRAM.

FD3:	AFFIRMATION COMPLI TYPE INVALID

COMPLIANCE TYPE HAS TO BE ALPHANUMERIC WITH NO SPACES.

20U:	CITY REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C11 AND C61 RECORDS PROVIDE SPACE IN WHICH TO REPORT THE CITY FOR THE PARTY IDENTIFIED IN THE C09 OR C59 RECORD. IF THE CITY FIELD IS TRANSMITTED WITH BLANKS, THIS ERROR MESSAGE WILL RESULT. FREQUENTLY, THIS ERROR WILL CAUSE ERROR MESSAGE EIK, "NAME/ADDRESS REQUIRED" TO BE GENERATED, AS WELL.

Q02:	'QT' PAYORS UNIT # INVALID

INPUT RECORD HAS EITHER SPACES, ALL ZEROS OR NON NUMERIC DATA IN POSITIONS "3" THROUGH "8".

VAT:	PAPERLESS/PAID MUST CONTAIN 'E'

THIS MESSAGE OCCURS IN THE ELECTRONIC INVOICE ENVIRONMENT WHEN A FILER RESENDS AN AII ENTRY SUMMARY, AFTER IT HAS BEEN PAID THEN SUBSEQUENTLY REJECTED BY CUSTOMS, WITHOUT SENDING AN 'E' IN POSITION 56 OF THE ABI 10 RECORD.

VNF:	FD 701: NO BASE UNIT REPORTED

IF A FILER SENDS QUANTITY/UOM (UNIT OF MEASURE) INFORMATION (REC FD02) FOR AN FDA LINE, THE UOM MUST BE ONE OF THE FDA BASE UNITS LISTED ON PAGE OG-31 OF THE CATAIR IF ONLY ONE QUANTITY/UOM IS SENT. IF MORE THAN ONE QUANTITY/UOM IS SENT, THE LAST ONE MUST BE A BASE UNIT AND MUST BE A VALID ONE.

77H:	NO ULT CONS RECORD FOR ENTRY

NO ULTIMATE CONSIGNEE WAS TRANSMITTED WITH THE ENTRY (EITHER HN OR HI). WHEN ACS CHECKED THE ULTIMATE CONSIGNEE (UC) NAME AND ADDRESS FILE FOR THE ENTRY NUMBER, (OR ENTRY AND LINE NUMBER IF THERE WERE MULTIPLE UC'S) NONE WAS FOUND. THERE ARE TWO POSSIBLE RESOLUTIONS. THE FIRST IS FOR THE FILER TO TRANSMIT A VALID REGULAR OR ENCRYPTED UC NUMBER IN THE ENTRY ITSELF. THE SECOND IS FOR THE FILER TO TRANSMIT THE UC NAME AND ADDRESS (IJ) RECORD THAT REFERENCES THE ENTRY (AND LINE NUMBER IF APPROPRIATE). AFTER RECEIVING THE "DATA ADDED AS REQUESTED" REPLY, THE FILER SHOULD RE-TRANSMIT THE ENTRY.

40T:	MX SPI REQUIRED

AN SPI OF 'MX' MUST BE ENTERED FOR TARIFF NUMBER 9802008055

AAQ:	CASE NOT REPORTABLE

THIS MESSAGE OCCURS WHEN AN ABI FILER ATTEMPTS TO SEND ANTIDUMPING OR COUNTERVAILING DUTY DATA FOR A CASE WHICH IS IN "INITIATED" (I) STATUS OR IN "EXCLUDED" STATUS (E) STATUS IN THE ANTI-DUMPING/COUNTERVAILING DATABASE. FILER SHOULD NOT SEND ADD/CVD INFORMATION FOR THESE STATUSES. NOTE: THIS MESSAGE ALSO APPLIES IF THE CASE IN QUESTION IS IN "FINAL" STATUS AND HAS AN "EFFECTIVE LIQ SUSP" DATE SHOWING ON THE ADAS RECORD FOR THE CASE NUMBER BEING REPORTED. IF THE FILER'S DUTY COMP DATE (EITHER THE RELEASE DATE, THE ESTIMATED ENTRY DATE, OR THE PAY DUE DATE, AS APPROPRIATE) IS PRIOR TO THE EFFECTIVE LIQ SUSP DATE, THE CASE IS NOT REPORTABLE AND THIS MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO CASES IN "PRELIMINARY", "REINSTATED", OR "ORDER" STATUS.

EIV:	UNIT, PERCENT, OR QUANTITY REQ

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IF AN ALLOWANCE OR CHARGE (DUTIABLE OR NONDUTIABLE) IS INDICATED BY THE PRESENCE OF ONE OF THE SIX VALID INDICATORS IN THE C17 REC, POS 4, THE FILER MUST SPECIFY THE CONDITIONS UNDER WHICH THE ALLOWANCE OR CHARGE IS MADE. THE C17 RECORD MUST, THEREFORE, HAVE ONE, AND ONLY ONE OF THE FOLLOWING COMBINATION OF FIELDS PRESENT: 1) RATE/UNIT + UNIT PRICE BASIS + UNIT OF MEASURE OR 2) ALLOWANCE/CHARGE PERCENT OR 3) UNIT OF MEASURE + ALLOWANCE/CHARGE QUANTITY. IF ONE OF THE ABOVE COMBINATION OF ELEMENTS IS NOT TRANSMITTED IN THE C17 RECORD, THIS MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE C51 RECORD.

MZW:	AMTS CORRECTED - HIT ENTER

AMOUNTS ON ENTRY WERE INCORRECT FOR THIS ACTION, CORRECTED FROM DATABASE.

VO2:	PREPARER SITE INVALID/MISSING

HP TRANSACTION WAS REJECTED BECAUSE THE EI WAS ORIGINALLY FILED WITH A PREPARER INDICATOR IN THE "B" RECORD AND A VALID PREPARER SITE, BUT THE "B" RECORD OF THE HP DOES NOT CONTAIN THE SAME PREPARER DATA.

322:	INVALID BROKER MODE

MUST BE NUMERIC; 0,1,2, OR 3.

1MB:	INVALID DIST/PORT ENTERED

A DISTRICT/PORT MUST BE ENTERED FOR PORT AUTHORITY ONLY. THEY ARE VALIDATED AGAINST THE REGION-DISTRICT-PORT FILE. THE ENTERED DISTRICT/PORT IS NOT ON THE FILE.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

 Next 10 >>Showing results 1 to 25 of 1405