ABI Error Message

AR3:	NOTIFY SUB TYPE NOT APPLICABLE

NOTIFY SUBSTITUTE DATA NOT APPLICABLE. .

VBV:	DT HS7: WARN - TIRE CODE MISSING

WHEN A "T" IS TRANSMITTED IN THE CLARIFICATION CODE FIELD IN THE DT01, POS 37, THIS WARNING WILL BE GENERATED IF THE TIRE MANUFACTURER ID CODE IS NOT TRANSMITTED IN POS 41-60. (NOTE - DOT PROVIDES A 2 CHARACTER CODE. FILER MUST ADD A LEADING OR TRAILING ZERO.)

VMU:	MOT NOT REQUIRED FOR WHSE WITHDRL

MOT CANNOT BE SUPPLIED FOR ENTRY TYPES 31, 32, 34, AND 38.

EJO:	LOCATION CODE NOT ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). LOCATION DATA (IN CODED FORMAT) IS TRANSMITTED IN THE C13 (OR C43) RECORD. IF THE LOCATION CODE INDICATOR IS "25", THE CODED LOCATION IN POS 11-15 MUST BE A VALID CODE FROM THE CENSUS SCHEDULE K. IF THE INDICATOR IS "26", THE CODED LOCATION MUST BE A VALID CODE FROM CENSUS SCHEDULE D. IF THE INDICATOR IS "66", THE LOCATION CODE MUST BE A VALID ISO COUNTRY CODE .

VML:	WARNING-WHSE/WTHDR FLR MISMATCH

THIS IS A WARNING MESSAGE ONLY. IT OCCURS WHEN THE FILER CODE OF THE ASSOCIATED WAREHOUSE ENTRY, SENT IN POSITIONS 21-23 OF THE 30 RECORD, DOES NOT MATCH THE FILER CODE OF THE WAREHOUSE WITHDRAWAL ENTRY SENT IN POSITIONS 59-61 OF THE 10 RECORD.

VPF:	EXPORT TARIFF NOT FOUND

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT TARIFF NUMBER IS SENT IN THE D10 RECORD, POSITIONS 7-16. IF SPACES ARE SENT, THIS ERROR MESSAGE WILL RESULT.

EIS:	LOCATION OR LOC CODED REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 RECORD REPORTS THE LOCATION OF THE INVOICE DELI TERMS. POS 9-10 AND 11-15 MUST BE REPORTED IN COMBINATION TO REPORT A LOCATION CODE IDENTIFIER AND THE LOCATION CODE. IF THESE ARE NOT TRANSMIT THE ACTUAL LOCATION MUST BE TRANSMITTED IN POS 16-50. IF ALL THREE ELEMENTS ARE BLANK IN THE C13 RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE SAME MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

2AL:	SURETY CODE INVALID

IF THE FILER TRANSMITS BOND CODE 8 (CONTINUOUS BOND) IN THE SUMMARY INPUT (REC 10, POS 49), THE SURETY CODE IN REC 10, POS 73-75 MUST BE LISTED ON THE BOND DATABASE FILE AND MUST BE IN ACTIVE STATUS. IN ADDITION, THE SURETY CODE CITED IN THE 10 RECORD MUST MATCH THE SURETY CODE IN THE BOND DATABASE FILE FOR THE IMPORTER NUMBER TRANSMITTED IN REC 10, POS 8-19. (THE SURETY CODE FIELD CANNOT BE BLANK, EITHER). IF CASH IS USED IN LIEU OF A BOND, THE BOND TYPE MUST BE A "9" AND SURETY CODE "998" MUST BE USED. IF BOND TYPE "0" IS SENT, AND NO SURETY CODE IS SENT, AS WELL, THIS MESSAGES RESULTS. THIS MESSAGE WILL ALSO APPEAR IF THE IMPORTER HAS TWO ACTIVE CONTINUOUS BONDS IN EFFECT AT THE SAME TIME. THE SURETY CODE FOR THE BOND THAT WENT INTO EFFECT FIRST MUST BE USED ON SUMMARY INPUT TRANSACTIONS. SURETY CODES ARE VALIDATED BASED ON DATE OF RELEASE, SO A SUMMARY TRANSMITTED WITH A SURETY CODE BASED ON ESTIMATED ENTRY DATE WILL ALSO REJECT IF A DIFFERENT SURETY CODE WAS IN EFFECT AT THE TIME OF RELEASE. FOR RECONCILIATION, THE SURETY CODE GIVEN MUST BE VALID ON CUSTOMS FILE.

VK2:	HLS: OP TYPE MUST BE 'C' OR 'M'

THE OPERAND TYPE CODE MUST BE 'C' FOR CONSTANT OF 'M' FOR MAP. WHEN 'C' THE OPERAND MUST BE A DISPLAY CONSTANT IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X ,....' WHEN 'M' THE OPERAND MUST BE A BMS MAP FIELD NAME.

0B0:	INVALID 'ISO' COUNTRY CODE

THE COUNTRY CODE ENTERED IS NOT ONE OF THE VALID 'ISO' COUNTRY CODES. FOR THE AUTOMATED INVOICE INTERFACE APPLICATION (CI), THIS MESSAGE INDICATES THAT THE COUNTRY CODE IN THE C11 REC, POS 57-58, IS EITHER BLANK OR DOES NOT APPEAR ON THE LIST OF VALID ISO COUNTRIES.

DKK:	NAFTA CLAIM - CANADIAN DATA REQD

THIS IS A DRAWBACK MODULE MESSAGE. FOR DRAWBACK DISKETTE, THE NAFTA INDICATOR WAS SET TO 'Y' IN THE 'CH' HEADER RECORD, OR FOR ABI, IT WAS SET TO '1'. EITHER WOULD INDICATE THAT THIS CLAIM IS A NAFTA CLAIM SUBJECT TO THE "LESSER OF" RULE. ACCORDINGLY, WE MUST HAVE THE NAFTA CNTRY IMPORT ENTRY DATA IN THE 'CI' (DISKETTE) OR 'D50' (ABI) RECORD(S) IF THE CLAIM TYPE IS '41' OR '44'. IF THE CLAIM TYPE IS '42' OR '45', THE NAFTA CTRY IMPORT ENTRY DATA WILL BE CONSIDERED OPTIONAL BY ACS, BUT THAT DOES NOT RELIEVE THE FILER OF THE STATUTORY REPORTING REQUIREMENT IF NAFTA IS APPLICABLE.

461:	PAY DUE DATE INVALID/CONFLICTING

THIS MESSAGE WILL RESULT IF THE FILER TRANSMITS A PAYMENT DUE DATE THAT IS AT LEAST ONE WORKING DAY IN THE FUTURE WHEN COMPARED TO THE ABI TRANSMISSION DATE. THE PAYMENT DUE DATE IS TRANSMITTED IN THE 30 RECORD, POS 54-59.

95H:	INVALID OTHER RECON INDICATOR

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). IF THE FILER DESIRES TO FLAG AN IMPORT ENTRY FOR A NON- NAFTA RECONCILIATION, THE SUMMARY INPUT MUST CONTAIN ONE OF SEVEN CODES WHICH ARE TRANSMITTED IN THE 20 REC, POS 77-79. THE ONLY ALLOWABLE CODES ARE, AS OF SEP 1998, ARE "001" THROUGH "007". IF ANY OTHER CODE, EXCEPT THREE BLANK CHARACTERS WHEN NO RECONCILIATION IS ELECTED, IS TRANSMITTED IN THIS FIELD, THIS ERROR MESSAGE WILL BE GENERATED.

EJZ:	REASON FOR DIFFERENCE REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). IN THE C39 RECORD, POS 24-58 IS PROVIDED TO ENABLE THE FILER TO PROVIDE A FREE FORM DESCRIPTION OF THE REASON FOR THE DIFFERENCE IN THE QUANTITY OF CARGO SHIPPED BY THE INVOICING PARTY AND THE QUANTITY REPORTED ON THE C33 RECORD. THIS FIELD CANNOT BE BLANK OR THIS ERROR MESSAGE WILL BE GENERATED.

ADQ:	VALID RELEASE ENTRIES REQ'D

THIS MESSAGE OCCURS IN CONSOLIDATED ENTRY SUMMARY TRANSACTIONS. THE RELEASE ENTRY NUMBERS SENT IN THE 32 RECORD OF THE EI TRANSMISSION MUST BE VALID NUMBERS IN THE SELECTIVITY FILE.

ASZ:	PRT:ENTRY NOT ON DEN 520/ASSOC514

THE ENTRY CITED DOES NOT MATCH ANY ENTRY LISTED ON THE USCS DATABASE RECORD THE DENIED 520 OR ASSOCIATED 514 NAFTA PROTEST NUMBER GIVEN.

8VB:	COMPUTER SITE INVALID FOR BLOCK

THIS MESSAGE IS GENERATED IN RESPONSE TO A TIB EXTENSION REQUEST (APPLICATION XN), ALTHOUGH IT MAY APPLY TO OTHER APPLICATIONS, AS WELL. IN THE INPUT RECORDS, THE XA RECORD CONTAINS A FIELD FOR THE DDPP OF THE SUMMARY FOR WHICH AN EXTENSION IS BEING REQUESTED. (POS 3-6). IF THAT FIELD IS LEFT BLANK, THIS MESSAGE IS GENERATED. NOTE: THIS MESSAGE WILL ALSO OCCUR IF THE PORT CODE FIELD IN THE XA RECORD IS NOT IDENTICAL TO THE PORT OF ENTRY FOR THE ENTRY BEING EXTENDED.

10U:	RECORD NOT FOUND

FILERS WHO USE APPLICATION HI TO TRANSMIT CARGO RELEASE DATA MAY USE BOND TYPE CODE "8" (CONTINUOUS BOND) OR "9" (SINGLE TRANSACTION BOND). BOND TYPES ARE TRANSMITTED IN THE H1 REC, POS 40. IF BOND TYPE 9 IS ELECTED, THE FILER IS REQUIRED TO TRANSMIT A SURETY CODE (H1 REC, POS 71-73). IF THE SURETY CODE TRANSMITTED IS IN "REVOKED" STATUS, THIS ERROR MESSAGE WILL RESULT.

564:	LINE MISSING/OUT OF SEQ/INVALID

SUMMARY INPUT CONSISTS OF A SERIES OF RECORDS DESCRIBED IN THE CATAIR. IF ANY REQUIRED RECORDS ARE TRANSMITTED IN THE WRONG ORDER, OR IF REQUIRED RECORDS ARE OMITTED IN THE TRANSMISSION, THIS ERROR MESSAGE WILL RESULT. THIS MESSAGE ALSO APPLIES TO OTHER APPLICATIONS, AS DESCRIBED IN THE CATAIR, FOR WHICH RECORDS ARE TRANSMITTED THAT ARE EITHER OUT OF PROPER SEQUENCE, OR ARE NOT PART OF THE APPLICATION. FOR EXAMPLE, TRANSMITTING THE OGA CORRECTION APPLICATION (CODE CP) WITH FCC DATA WILL CAUSE THIS ERROR MESSAGE. OMITTING THE CARRIER CODE IN THE 01 RECORD FOR A BORDER CARGO RELEASE INPUT (HN) FOR AN AMS PORT WILL GET THIS MESSAGE. MOST OTHER SITUATIONS THAT RESULT IN THIS ERROR ARE FAIRLY STRAIGHTFORWARD AS TO WHICH RECORDS MAY BE MISSING OR SENT IN ERROR. FOR RECON ENTRIES, CHECK EVERY R20 RECORD THAT HAS A FOLLOWING R21 RECORD. THERE MUST BE A TRAILER COUNTER IN POS 78-79 OF THE R20 WHICH SHOWS HOW MANY R21'S ARE BEING INCLUDED FOR THE ENTRY IN THE R20. IF THE R20 SHOWS '01' IN POS 78-79, THERE MUST BE ONLY 1 R21 RECORD, AND SO ON. THE REVERSE IS TRUE, AS WELL: IF NO R21 REC, THE R20 MUST SHOW '00'.

VAE:	DT HS7: INVALID BOX NUMBER

THE ONLY VALID BOX NUMBERS (RECORD DT01, POS 8-9) ARE 01, 2A, 2B, 03, 04, 05, 07, 08, 09, 11 AND 12. THESE ARE FROM DOT FORM HS-7, WHICH IS NO LONG DISPLAYED IN THE CATAIR.

VP9:	TOT CANADIAN PAID MUST = ZERO

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE TOTAL NAFTA CTRY PAID DUTY IS SENT IN THE D30 RECORD, POSITIONS 26-36. IT MUST BE ZERO IF IT IS GREATER THAN THE TOTAL ESTIMATED DUTY (U.S.). (JO 081098) THIS MESSAGE IS ALSO GENERATED WHEN POSITION 68 OF THE D30 RECORD IS SPACED FILLED INDICATING THAT THE ASSOCIATED NAFTA CTRY ENTRY DATA WILL BE PROVIDED AND NO D20 RECORD CONTAINING THE DATA IS SENT.

07H:	EST ARRIVAL DATE NOT IN RANGE

THE ESTIMATED ARRIVAL DATE ENTERED IS NOT WITHIN THE RANGE ALLOWED. VALID DATES INCLUDE: 1) TODAY'S DATE, 2) ANY DATE UP TO 30 DAYS IN THE PAST, 3) ANY DATE UP TO 5 DAYS IN THE FUTURE.

4JB:	QUANTITY MUST BE NUMERIC

MUST BE EITHER NUMERIC OR BLANK.

94N:	EXPECTED UNG/UNH SEGMENT NOT FND

EDIFACT SYNTAX ERROR. THE UNG/UNH (MESSAGE HEADER) SEGMENTS ARE MISSING.

1F1:	REF. # CF4811 NOT ON IMP. FILE

THE 4811 IS ON FILE FOR THE REFERENCED AGENT AND IMPORTER, HOWEVER, THE AGENT (REFERENCE) NUMBER IS NOT ON THE IMPORTER FILE. A CF 5106 MUST BE INPUT FOR THE REFERENCE NUMBER. CURRENTLY, THERE IS NO ADDRESS OF RECORD FOR THIS AGENT.

 Next 10 >>Showing results 1 to 25 of 1405