ABI Error Message

04D:	UNLDING DIST/PORT NONEXISTENT

PORT OF UNLADING IS NOT IN DISTRICT/PORT FILE

AQ8:	PROTESTANT ADDRESS REQUIRED

WHEN THE PROTESTANT TYPE IS EITHER 'F' (FOREIGN EXPORTER/PRODUCER) OR 'O' (OTHER), FULL NAME AND ADDRESS INFORMATION IS REQUIRED, INCLUDING COUNTRY CODE 'US' FOR DOMESTIC ADDRESSES (USED WHEN THE PROTESTANT TYPE IS 'O') AND EITHER 'MX' OR 'CA' FOR MEXICAN AND CANADIAN ADDRESSES (USED WHEN THE PROTESTANT TYPE IS 'F'.

VGS:	FD 701: DMNS INV;PREV DMNS=0'S

THIS ERROR MESSAGE OCCURS WHEN A FILER HAS TRANSMITTED A CONTAINER DIMENSION IN THE "CONTAINER DIMENSION #2" FIELD (REC FD03, POS 69-72) OR "CONTAINER DIMENSION #3" FIELD (REC FD03, POS 73-76) AND THE PREVIOUS CONTAINER DIMENSION FIELD WAS ZERO FILLED. FOR EXAMPLE, IF 0511 WAS TRANSMITTED IN THE "CONTAINER DIMENSION #2" FIELD AND 0000 IN THE "CONTAINER DIMENSION #1" FIELD, THIS REJECT WOULD RESULT.

14H:	INVALID DUTY ENTERED

DUTY ENTERED ON LINE ITEM IS NON-NUMERIC OR OTHERWISE INVALID.

ACQ:	ULTIMATE CONSIGNEE IS INACTIVE

THE IDENTIFICATION NUMBER FOR THE ULTIMATE CONSIGNEE (HI APPLICATION, REC H POS 11-22 OR EI APPLICATION, REC 10, POS 20-31) IS CURRENTLY IN 'INACTIVE' STATUS ON THE IMPORTER FILE. ABI FILERS SHOULD USE APPLICATION 'TI' 5106 UPDATE, TO SUBMIT THE REACTIVATION. IF THE NUMBER IS A U.S. CUSTOMS ASSIGNED NUMBER, THE ENTRY TEAM CAN REACTIVATE THIS NUMBER.

79I:	MANUFACTURER NUMBER NOT ON FILE

THE MANUFACTURER NUMBER USED IN THE ABI SELECTIVITY TRANSACTION DOES NOT EXIST IN THE MANUFACTURER FILE. THIS IS A WARNING MESSAGE ONLY. IT WILL BE FOLLOWED BY THE '42F' "DATA ADDED WITH WARNINGS" MESSAGE.

VMR:	CARGO RELEASE ON WHSE WITHDRAWAL

A WAREHOUSE WITHDRAWAL WAS ATTEMPTED USING AN ENTRY NUMBER THAT ALREADY HAS RELEASE ON FILE.

AEY:	42 SENT; NOT REQUIRED

IN THE AUTOMATED INVOICE INTERFACE PROGRAM THIS ERROR MESSAGE WILL OCCUR IF AUTOMATED FILER SENDS A 42 INVOICE RECORD WITHOUT AN "E" (ELECTRONIC INVOICE INDICATOR) IN POSITION 56 OF THE 10 RECORD. IF THE FILER SENDS THE "E" THEY MUST SEND THE 42 RECORD.

362:	DWBK CHECK ALREADY ISSUED

CHECK ALREADY ISSUED

VLV:	DRAWBACK DUTY OR TAX REQUIRED

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER HAS LEFT THE AMOUNT OF DUTY AND TAX BLANK. FOR THE CLAIM TO BE VALID, THERE MUST BE EITHER DUTY OR TAX (OR BOTH) TRANSMITTED.

3A5:	SELECTIVITY ALREADY PERFORMED

THIS MESSAGE OCCURS WHEN A FILER ATTEMPTS TO SEND SELECTIVITY DATA FOR AN ENTRY NUMBER WHERE SELECTIVITY HAS ALREADY BEEN PERFORMED, EITHER ELECTRONICALLY OR BY MANUAL PROCESSING. THIS MESSAGE DOES NOT OCCUR IF THE FILER SENDS SELECTIVITY DATA FOR AN ENTRY THAT RECEIVED AN INITIAL SELECTIVITY RESPONSE OF "PAPERLESS". IN THIS CASE THE FILER WILL RECEIVE MESSAGE 681 "CUSTOMS REL VIA EREL ON FILE". NOTE: IN SOME CASES, THIS MESSAGE WILL ACCOMPANY THE MESSAGE "OGA DATA IGNORED" AND IF THE INPUT APPLICATION WAS FROM AN ENTRY SUMMARY, THESE TWO MESSAGES WILL NOT CAUSE A REJECTION.

VBR:	OGA DATA IGNORED

THIS MESSAGE IS NOT AN ERROR MESSAGE BUT RATHER AN INFORMATIONAL WARNING MESSAGE. IT OCCURS WHEN A FILER ATTEMPTS TO CERTIFY A SUMMARY WHICH HAS OGA INFORMATION WHEN CARGO SELECTIVITY HAS ALREADY BEEN PROCESSED PREVIOUSLY. IF THE FILER IS RECERTIFYING INADVERTENTLY, THE WARNING MESSAGE MAY BE IGNORED. IF THE FILER IS CHANGING SUMMARY DATA THAT AFFECTS PREVIOUSLY REPORTED FDA DATA, THE FILER SHOULD CONTACT THE APPROPRIATE CUSTOMS OFFICE TO REQUEST A DELETE OF SELECTIVITY. THE APPROPRIATE CUSTOMS OFFICE WILL APPROVE OR DENY THE REQUEST. IF APPROVED, THE FILER SHOULD RETRANSMIT THE SUMMARY AND CERTIFY FOR CARGO.

AAM:	MFR/SHIPPER ID INVALID ISO PREFX

THIS ERROR MESSAGE WILL RESULT IF A SHIPMENT IDENTIFIES A MANUFACTURER IDENTIFICATION NUMBER (MID) INVOLVING A CANADIAN SHIPPER. VALID ISO PREFIXES FOR THESE SHIPMENTS ARE: XN (WHERE N= ONE OF THE 10 ALLOWABLE ALPHA CHARACTERS FOR THE 10 CANADIAN PROVINCES). IF THE SHIPMENT IN QUESTION DOES NOT INVOLVE CANADIAN GOODS, THE ISO COUNTRY PREFIX CODE MUST BE A VALID TWO-CHARACTER PREFIX FROM THE DATABASE. ERRORS IN THE CODE FOR NON-CANADIAN SHIPMENTS WILL GENERATE ERROR MESSAGE 0M9.

VKO:	HLT: INQUIRY DISPLAY MUST BE Y/N

THE INQUIRY DISPLAY SWITCH MUST BE Y=YES N=NO.

0LJ:	TEXTILE DATE OF EXPORT INVALID

THIS MESSAGE IS GENERATED DURING ENTRY SUMMARY PROCESSING (EI) AND WILL REJECT ON THE 51 RECORD. THE DATE OF EXPORTATION (TEXTILE) REPRESENTS THE DATE THE TEXTILE GOODS WERE EXPORTED FROM THE COUNTRY OF ORIGIN. IF THE COUNTRIES OF ORIGIN AND EXPORT ARE THE SAME, THE DATE OF EXPORTATION IN THE 50 RECORD AND THIS DATE IN THE 51 RECORD MUST BE IDENTICAL. IF THE COUNTRIES OF ORIGIN DIFFER, THIS DATE CAN BE EARLIER THAN OR EQUAL TO THE DATE OF EXPORTATION ON THE 50 RECORD. SEE CATAIR PAGE ENS-53. THIS MESSAGE WILL ALSO BE GENERATED IF A TEXTILE EXPORT DATE IS REPORTED WHEN NONE IS REQUIRED (NON-TEXTILE CATEGORY CLASSIFICATION)

VGJ:	FD 701: NO FDA SHPPR NAME/ADDR

DATA SUBMITTED AS PART OF THE FDA INTERFACE MUST INCLUDE AN MID THAT REPRESENTS THE ACTUAL SHIPPER. THIS MID WILL BE COMPARED TO THOSE LISTED ON THE MID FILE. IF THE MID IN QUESTION IS LISTED ON THIS FILE IN "PENDING" STATUS, THIS MESSAGE WILL RESULT. THE MID FILE NO LONGER ACCEPTS MID'S WITHOUT NAMES AND ADDRESSES, SO THE PENDING FILE SHOULD NOT INCREASE IN SIZE. THIS MESSAGE SHOULD NOT OCCUR IN NORMAL ABI INPUT TRANSACTIONS.

AR0:	ACTION NOT APPLICABLE W/TYPE

THE PROTESTANT TYPE IS NOT "F" (FOREIGN) OR "O" (OTHER). THEREFORE, THE FILER CANNOT TRANSMIT CHANGE OF NAME OR ADDRESS INFORMATION WITH THE ACTION CODE "C" (CHANGE/CORRECT).

BL2:	UNLAD DP CANNOT EQUAL ENTRY DP

IF AN IN-BOND NUMBER (EITHER CONVENTIONAL OR "V" NUMBER) IS SENT IN POSITIONS 3-14 OF THE 22 RECORD (EI) OR POSITIONS 3-14 OF THE HA RECORD (HI) THEN THE DISTRICT PORT OF UNLADING (POSITIONS 30-33 OF THE EI 20 RECORD OR POSITIONS 65-68 OF THE HI H1 RECORD) CANNOT BE THE SAME AS THE ENTRY DISTRICT PORT.

512:	TOTAL CVD DOES NOT MATCH EST.

IF THE TOTAL COUNTERVAILING DUTY REPORTED ON EACH LINE OF THE SUMMARY IN THE 60 RECORD IS WITHIN $2.99 (PLUS OR MINUS) OF THE CORRECT CALCULATED AMOUNT OF THE LINE, ABI WILL ACCEPT THE LINE AMOUNT. HOWEVER, IF THE SUMMARY HAS MORE THAN ONE LINE WITH COUNTERVAILING DUTY DUE, THE GRAND TOTAL OF ALL COUNTERVAILING DUTY AMOUNTS MUST ALSO BE WITHIN $2.99 (PLUS OR MINUS) OF THE SYSTEM-CALCULATED AMOUNT. EVEN IF THE TOTAL AMOUNT OF COUNTERVAILING DUTY (90 REC, POS 27-37) IS EQUAL TO THE VARIOUS LINE AMOUNT TOTALS, ABI WILL REJECT THE SUMMARY IF THE TOTAL AMOUNT TRANSMITTED IS NOT WITHIN THE STATED TOLERANCE AS COMPARED TO THE CALCULATED TOTAL COUNTERVAILING DUTY AMOUNT.

8P1:	INELIGIBLE - CONSOLIDATED RLSE

THIS DRAWBACK MODULE ERROR MESSAGE WILL OCCUR IF AN IMPORT ENTRY IS DESIGNATED THAT WAS NOT AN ENTRY SUMMARY, BUT A CONSOLIDATED RELEASE. IN THESE CASES, THE ENTRY THAT SHOULD BE CITED, IF ANY, WOULD BE THE CONSOLIDATED SUMMARY AGAINST WHICH DUTIES/TAXES WERE PAID.

4BA:	REL PROCESSING NOT TEST/OPER

THIS MESSAGE IS USUALLY FOUND WHEN FILERS ARE FIRST TESTING ABI. NORMAL PROCEDURES ARE TO TEST ENTRY SUMMARY INPUT FIRST. DURING SUMMARY TESTING, FILERS MAY NOT SIMULTANEOUSLY BE SET UP FOR CARGO RELEASE TESTING. IF THE FILER TRANSMITS A CARGO RELEASE INPUT WHILE IN SUMMARY TEST STATUS, THIS MESSAGE WILL BE GENERATED. THIS MESSAGE WILL ALSO OCCUR WHEN THE PORT (AND FILER) ARE NOT SET UP FOR BORDER CARGO SELECTIVITY BUT THE FILER IS OPERATIONAL FOR ENTRY SUMMARY AND REGULARY CARGO SELECTIVITY.

12S:	DB ERROR ON XRJ (FACILITY) FILE

THE FIRMS CODE RECORD WHICH MATCHES THE TRANSMITTED FIRMS CODE CONTAINS A FACILITY TYPE CODE OF EITHER 07 OR 08, WHICH MEANS FIRMS CODE NOT VALID FOR ENTRY PURPOSES.

VDR:	FTZ ENTRY REQUIRES FIRMS CODE

THE FIRMS CODE (REC 20, POS 72-75) IS MANDATORY FOR ENTRY TYPE 06 (EI APPLICATION) OR REC H2, POS 3-6 IN THE HI APPLICATION.

4JD:	TARIFF 1 / TARIFF 2 DISCREPANCY

A SECOND TARIFF NUMBER WITHIN CHAPTERS '50' THRU '63' WAS ENTERED WITH A PRIMARY TARIFF NUMBER OF 9802005010 OR 9802008040. SEE US NOTE 2B WHICH EXCLUDES TESTILE ARTICLES. SINCE THE ABOVE WAS WRITTEN CHANGE REQUESTS ADDED THE FOLLOWING EDITS TO 9802008040: A HTS NUMBER WITH A TEXTILE CATEGORY NUMBER MAY NOT BE USED AS THE ADDITIONAL TARIFF NUMBER UNLESS IT IS CHAPTER 64.

VL3:	DRAWBACK DDPP INVALID

IN THE DRAWBACK MODULE THIS MESSAGE MEANS THAT THE FILER HAS GIVEN US A CLAIM THAT DOES NOT USE ONE OF THE EIGHT CORRECT PORT CODES BY FILING LOCATION:  0401, 1001, 2002, 3901, 5201, 5301, 2704, 2809

 Next 10 >>Showing results 1 to 25 of 1405