ABI Error Message

VHQ:	DT HS7: MAKE REQUIRED

THIS ERROR MESSAGE OCCURS IN THE DOT INTERFACE. THE MAKE (NAME OF COMPANY THAT MANUFACTURED VEHICLE) SENT IN POSITIONS 5-19 OF THE DT02 RECORD IS MANDATORY IF BOXES 03, 05 OR

EJ7:	CNTRY INCONSISTENT W MANUF/SUB CD

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE ISO COUNTRY CODE FOR THE PARTY IDENTIFIED IN THE C08 RECORD IS TRANSMITTED IN THE C11 REC, POS 57-58. IF THE ISO CODE IS "CA", AND THE PARTY TYPE CODE TRANSMITTED IN THE C08 RECORD IS EITHER "SU", "II", OR "MF", A VALID MID MUST BE TRANSMITTED (STARTING WITH ONE OF THE 10 VALID PROVINCE CODES FOR CANADIAN ORIGIN CARGO). CONVERSELY, IF THE PARTY CODE IS "SU", "II", OR "MF", AND THE MID STARTS WITH "XN" (WHERE "N" EQUALS ONE OF THE TEN PROVINCE CODE IDENTIFIERS), THE ISO COUNTRY CODE TRANSMITTED IN THE C11 RECORD MUST BE "CA".

95D:	21 REC SENT; NOT ALLOWED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). THE 21 RECORD TO REPORT THE BOND AMOUNT AND THE PRODUCER IDENTIFICATION NUMBER IS ONLY PERMITTED WHEN A SINGLE TRANSACTION BOND (BOND TYPE 9) IS TRANSMITTED. IF ANY OTHER TYPE OF BOND INDICATOR IS SENT IN THE 10 REC, POS 49, THIS ERROR MESSAGE WILL RESULT.

384:	EXPORT DATE INVALID/CONFLICTING

THE EXPORT DATE TRANSMITTED BY THE ABI FILER IS NOT CHRONOLOGICALLY CONSISTENT WITH THE IMPORT DATE OR WITH ANOTHER DATE IN THE SUMMARY INPUT TRANSACTION. THUS, IF THE IMPORT DATE IS REPORTED TO ABI AS JULY 12, 1997, THE EXPORT DATE MUST BE A DATE EQUAL TO JULY 12 OR EARLIER. THIS ERROR WILL ALSO RESULT IF THE EXPORT DATE FIELD IS BLANK (50 REC, POS 71-76). IF A FILER HAS SENT AN ENTRY DATE UPDATE (DN APPLICATION) AND THAT DATE IS REFLECTED IN THE 'FLR ENT DATE' FIELD OF THE MASTER ENTRY SUMMARY HEADER SCREEN FOR THE ENTRY, ANY EXPORT DATE WHICH IS LATER THAN THE UPDATED ENTRY DATE ESTABLISHED BY THE DN INPUT WILL ALSO CAUSE THIS MESSAGE TO BE ISSUED.

"8VH:

QUANTITY & UNITS REQUIRED FOR ADD

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE FILER TRANSMITS AN L3 RECORD, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER, THE MANIFESTED QUANTITY AND MANIFESTED UNIT OF MEASURE MUST BE TRANSMITTED. IF THE QUANTITY AND UNIT OF MEASURE ARE NOT TRANSMITTED, THIS ERROR MESSAGE WILL RESULT. NOTE: IF THE BILL NUMBER AND UNITS OF MEASURE ARE SENT, BUT THE QUANTITY IS OMITTED, THIS ERROR MESSAGE WILL STILL BE GENERATED.

Q41:	STMT PAID, TO DELETE, NEGATE COLL

THIS MESSAGE OCCURS WHEN AN ABI FILER ATTEMPTS TO REMOVE AN ENTRY FROM STATEMENT (APPLICATION HP) AND THE STATEMENT HAS ALREADY HAD AN ACH AUTHORIZATION TRANSMITTED TO ABI (APPLICATION QN). THE SOLUTION IS FOR THE FILER TO CONTACT A CLIENT  REP WHO CAN PERFORM THE PAYMENT AUTHORIZATION DELETE FUNCTION, IF THE PAYMENT AUTHORIZATION WAS TRANSMITTED ON THE SAME DAY AS THE REQUEST IS MADE.

EJJ:	DUPLICATE INVOICE LINES

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). EACH INVOICE LINE IS INCREMENTED BY ONE IN THE C31 RECORD THE FIRST C31 REC, POS 4-7, MUST START WITH "0001".DUPLICATE LINE NUMBER ARE NOT PERMITTED. THIS ERROR MESSAGE WILL RESULT IF THE SAME LINE NUMBER APPEARS IN THE CI TRANSMISSION FOR THE INVOICE. .

AR1:	CANNOT CHANGE PROTESTANT TYPE

THE PROTESTANT PARTY TYPE CANNOT BE CHANGED AFTER INITIAL FILING.

VHR:	DT HS7: INVALID MAKE

THIS ERROR RESULTS IF THE MAKE OF THE VEHICLE IN THE DT02 RECORD, POS 5-19 HAS FEWER THAN 3 CHARACTERS.

AR7:	NOTIFY SUB. DATA REJECTED

NOTIFY SUBSTITUTE DATA REJECTED.

AE2:	PO BOX NOT ALLOWED IN 2ND ADDRESS

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADD 5106" INPUT TRANSACTION, APPLICATION IDENTIFIER TI. FOR COMPANIES WITH FOREIGN ADDRESSES, ONLY ONE LINE OF ADDRESS DATA IS PERMITTED AND A POST OFFICE BOX IS NOT PERMITTED IN THE ADDRESS LINE. THIS MESSAGE WILL BE GENERATED IF THE T2 OR TB RECORD CONTAINS A POST OFFICE BOX.

029:	INVALID FOREIGN PORT CODE

THE FOREIGN PORT CODE (AKA SCHEDULE K) NUMBER HAS BEEN OMITTED, IS IN IMPROPER FORMAT OR NOT ON THE FOREIGN PORT CODE FILE. CHECK THE RFDL FILE USING THE THREE DIGIT COUNTRY CODE FOUND IN THE RFJL FILE. THE PROPER FORMAT IS A FIVE-DIGIT NUMERIC. IF MODE OF TRANSPORTATION IS 12, THEN THE FOREIGN PORT CODE MUST BE FROM A PORT IN EITHER MEXICO OR CANADA.

07N:	MASTER BILL REQUIRED

IN A CARGO RELEASE TRANSACTION THIS ERROR MESSAGE RESULTS IF A HOUSE BILL OR SUB-HOUSE BILL IS SENT WITHOUT A MASTER BILL. IT WILL ALSO BE GENERATED IF NO MASTER BILL IS SENT WITHOUT EITHER A HOUSE OR SUBHOUSE BILL. THIS MESSAGE WILL ALSO GENERATE IF THE FILER TRANSMITS AN INVALID PAPERLESS MASTER INBOND (VNN) NUMBER ON A CARGO RELEASE INPUT. IF THE INBOND NUMBER HAS EITHER NO CHECK DIGIT OR AN INVALID CHECK DIGIT, THAT WILL CAUSE THIS ERROR TO GENERATE.

RBT:	RECON DATE OVER 90 DAYS IN FUTURE

FOR RECONCILIATION, THIS MESSAGE INDICATES THAT THE DATE IS IN A VALID FORMAT, BUT IS GREATER THAN 90 DAYS IN THE FUTURE. DATES UP TO 90 DAYS IN IN ADVANCE ARE ACCEPTED VIA  ABI FOR RECONCILIATION.

VA1:	INV DECLARATION IN 'OA' REC

THIS ERROR MESSAGE WILL BE GENERATED IF THE OA RECORD IS TRANSMITTED BLANK.

BR9:	PAY AMOUNTS MISMATCH (R17:R90)

THE PAYMENT AMOUNTS OF DUTY, TAX, OR FEES MUST EQUAL THE TOTAL RECON DUTY, OR FEES FROM THE 'R90' MINUS THE ORIGINAL DUTY, TAX, FEES, RESPECTIVELY, FOR THE 'R90' RECORD. IF THE CALCULATION YIELDS ZERO OR A NEGATIVE, THE CORRESPONDING 'R17' AMOUNT SHOULD BE ZERO.

170:	INVALID MANUFACTURER NUMBER

MINIMUM CONSTRAINTS FOR VALID MANUFACTURER NUMBER INCLUDE: 1) ENTIRE NUMBER INCLUDING ISO CODE MUST BE AT LEAST 7 ALPHA OR NUMERIC CHARACTERS LONG AND IT MUST BE LEFT JUSTIFIED. 2) IF THE MID INCLUDES PIECE FOUR (LARGEST NUMBER IN STREET ADDRESS), NUMERIC CHARACTERS CANNOT BE PRECEDED BY MORE THAN 8 ALPHA CHARACTERS. NOTE: AS OF JUNE 27, 2000, WHEN THIS MESSAGE IS GENERATED, ABI IS NOT INDICATING WHICH LINE OF THE SUMMARY IS INVALID.

VPP:	EXPORT DT CANNOT BE > SYS DATE +2

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN POSITIONS 22-27 OF THE D01 RECORD AND CANNOT BE MORE THAN 2 DAYS IN ADVANCE OF THE SYSTEM DATE.

07R:	PAPERLESS MIB/MOT CONFLICT

IF A PAPERLESS MIB ("V" NUMBER) IS TRANSMITTED IN POSITIONS 3-14 OF THE 22 RECORD IN THE ENTRY SUMMARY TRANSACTION OR IN POSITIONS 3-14 OF THE HA RECORD IN THE ENTRY TRANSACTION THEN THE MODE OF TRANSPORTATION (MOT) TRANSMITTED IN POSITIONS 28-29 OF THE 20 RECORD (ENTRY SUMMARY) OR POSITIONS 32-33 OF THE H1 RECORD (CARGO SELECTIVITY) MUST BE 10 OR 11 (VESSEL).

EI0:	INVOICE LINE CAN'T BE ZERO

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). EACH ITEM ON AN INVOICE IS DESCRIBED IN THE C31 THROUGH C39 RECORDS. THE C31 RECORD CONTAINS A COUNTER CALLED THE INVOICE LINE NUMBER IN POS 4-7. THE FIRST SUCH RECORD TRANSMITTED ON AN INVOICE INPUT WOULD BE "001", ETC. "000" IS NOT A VALID INVOICE LINE NUMBER AND WILL GENERATE THIS ERROR MESSAGE IF USED.

AP8:	VOID. REQ. DATA INCOMPLETE

VOIDANCE REQUEST DATA IS INCOMPLETE -MISSING THE REQUEST INDICATOR OR THE REQUEST DATE.

630:	INVALID MODE OF TRANSPORTATION

IN ORDER FOR CARGO CERTIFICATION TO BE PERFORMED, THE MODE OF TRANSPORTATION (MOT) FIELD MUST BE COMPLETED. INFORMAL ENTRY SUMMARY TRANSACTIONS (APPLICATION IDENTIFIER EI) WHICH REQUEST CARGO CERTIFICATION, BUT DO NOT PROVIDE THE MOT IN THE 20 REC, POS 28-29, WILL RECEIVE THIS ERROR MESSAGE. SIMILARLY, SEPARATE CARGO RELEASE INPUT TRANSACTIONS (APPLICATION IDENTIFIER HI) WHICH OMIT THE MOT (H1 REC, POS 32-33) WILL ALSO RECEIVE THIS ERROR MESSAGE, WHETHER OR NOT THE RELEASE CERTIFICATION CODE (H1 REC, POS 34) IS ALSO TRANSMITTED. (INFORMAL ENTRY SUMMARY INPUT WHICH DOES NOT REQUEST CARGO CERTIFICATION WILL BE ACCEPTED WITHOUT THE MOT).

Q04:	'QT' STATEMENT NUMBER INVALID

QT' STATEMENT NUMBER HAS SPACES, ALL ZEROS, OR OTHER NON-ALPHANUMERIC CHARACTERS IN POSITIONS 14-24. UNDER CURRENT PROGRAMMING, POSITION 14 MUST ZERO-FILLED. WHEN CUSTOMS BILLS ARE AVAILABLE FOR PAYMENT THROUGH ACH, POSITION 14 WILL BE CHANGED TO ACCEPT OTHER NUMBERS.

52Y:	MAXIMUM I7 RECORDS EXCEEDED

REFER TO ADMINISTRATIVE MESSAGE 98-0236, DATED 032098. IN SOME CASES THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) WAS CAUSING DATA BASE ERRORS WHEN THE NUMBER OF I7 ENTRY NUMBER/LINE ITEM SEQUENCE RECORDS EXCEEDED THE LIMIT SET BY THE PROGRAM FOR A PARTICULAR NAME AND ADDRESS I3 AND I4 RECORD SET. ALSO, IN SOME REJECT SITUATIONS THE ERROR MESSAGE "524 TRANSACTION DATA REJECTED" WAS DISPLAYING ERRONEOUSLY IN THE IB OUTPUT MESSAGES WHEN THE ENTIRE IJ APPLICATION WAS NOT REJECTED. TO ELIMINATE THE ABOVE SITUATIONS AND TO PROVIDE MORE ACCURATE INFORMATION WHEN ERRORS ARE DETECTED IN THE ULTIMATE CONSIGNEE NAME AND ADDRESS APPLICATION (IJ) TRANSMISSIONS, THIS ERROR MESSAGE AND 52Z "ENTRY/LINE SEQUENCE REJECTED" ARE GENERATED. BOTH THE 52Y AND 52Z MESSAGES WILL APPEAR AS IB OUTPUT RECORDS WHEN CUSTOMS DETERMINES THAT THE INFORMATION TRANSMITTED CANNOT BE ADDED TO THE DATABASE AS REQUESTED BY AN ABI FILER.

508:	TOTAL TAX DOES NOT MATCH EST.

THE TOTAL INTERNAL REVENUE TAX (REC 90, POS 14-24) DOES NOT EQUAL THE TOTAL LINE ITEM INTERNAL REVENUE TAXES IN RECS 60, POS 59-68.

 Next 10 >>Showing results 1 to 25 of 1405