ABI Error Message

VGI:	FD 701: FDA SHPPR NOT ON FILE

THIS ERROR MESSAGE IS A REJECTION IN THE FDA INTERFACE. THE FDA SHIPPER IDENTIFICATION NUMBER (MID, REC FD01, POS 63-77) MUST BE ON FILE FOR THE SHIPPER BEFORE THE FDA ENTRY WILL PROCESS. THE FILER MUST ADD THE SHIPPER IDENTIFICATION NUMBER TO THE DATABASE VIA ABI AND RESEND THE ENTRY.

04A:	INVALID BL NBR FOR PAIRED CITIES

BILL OF LADING NUMBER ENTERED MUST BE VALID (NOT SPACES OR NON-NUMERIC) FOR PAIRED CITIES.

VGA:	FD701: INV LINE#/SEQ

THIS ERROR MESSAGE RESULTS WHEN A FILER SENDS AN FDA CORRECTION (CP TRANSACTION) TO RESPOND TO AN FDA DT REJECT MESSAGE AND THE CUSTOMS LINES THAT THEY ARE SENDING IN THE FDA CORRECTION DO NOT MATCH THE EXACT SEQUENCE OF LINES IN THE SELECTIVITY RECORD. WHEN A CORRECTION IS DONE, THE FILER MUST SEND THE CUSTOMS LINES (WITH THE CORRESPONDING FDA DATA OR DISCLAIM AS APPLICABLE) IN THE EXACT ORDER AS IT APPEARS ON THE SELECTIVITY LINE ITEM SCREEN. THE FILER MUST ALSO SEND ALL CUSTOMS LINES WHETHER OR NOT THEY ARE FDA REGULATED. CHECK THE ORDER OF THE TARIFF NUMBERS IN THE CP SEND AGAINST THE SELECTIVITY LINE ITEM SCREEN. THEY MUST MATCH EXACTLY. THIS MESSAGE ALSO RESULTS WHEN A FILER ATTEMPS TO START A FDA LINE NUMBER WITHIN A CUSTOMS LINE WITH A NUMBER OTHER THAN 001. THE MOST COMMON OCCURANCE IS WHEN CUSTOMS LINE 001 IS SENT AND, FOR EXAMPLE FDA LINES 001 AND 002 ARE SENT WITH IT. THEN THE FILER SENDS CUSTOMS LINE 002 AND STARTS THE FDA LINE NUMBERING WITH 003. THIS REJECT WILL ALSO OCCUR IF THE FILER SENDS BOTH AN FD0 (DISCLAIM) AND FDA DATA FOR THE SAME CUSTOMS LINE ON AN ENTRY SUMMARY INPUT TRANSACTION.

VM0:	HLN:OVERRIDE SEQUENCE NBR INVALID

THE OVERRIDE SEQUENCE NUMBER IS A REQUIRED FIELD. SEQUENCE NUMBERS MUST BE UNIQUE SEQUENTIAL ASCENDING NUMBERS STARTING FROM 01.

20F:	INBOND NUMBER INVALID -BAD LENGTH

THE SYSTEM WILL ONLY ACCEPT AN 8 OR 11 CHARACTER INPUT FOR THIS FIELD. CHECK THE NUMBER OF CHARACTERS ENTERED ON YOUR SCREEN.

CF1:	FEI NOT FOUND ON ACS

THE FEI NUMBER (FDA ESTABLISHMENT IDENTIFIER) QUERIED IS NOT ON FILE IN THE FILE RESIDENT IN ACS. THIS IS A FROM A 'Q' INDICATOR AS OPPOSED TO AN 'A' (ADD) INDICATOR.

APK:	AFR REVIEW REQ. IND. INVALID

A REQUEST FOR REVIEW OF AFR DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 60 DAYS AFTER THE APPLICATION FOR FURTHER REVIEW HAS BEEN DENIED BY CUSTOMS. THE VALUE SUBMITTED IN THE AFR REVIEW REQUEST FIELD IS NOT 'R'.

APB:	USCS PROTEST NUMBER REQUIRED

THE CUSTOMS ASSIGNED PROTEST NUMBER ASSIGNED AT INITIAL PROTEST FILING IS REQUIRED FOR ALL SUBSEQUENT (AMENDMENT, ADDENDA & SERVICE) FILINGS FOR THAT PROTEST.

VLF:	GREATER THAN 9,999 ITEMS SENT

THE TOTAL OF ALL IMPORT ENTRY AND CM RECORDS IN A DRAWBACK TRANSACTION CANNOT EXCEED THE MAXIMUM OF 9,999. THAT NUMBER IS THE MAXIMUM ACS CAN HANDLE. FOR RECONCILAITION, THIS MEANS THAT MORE THAN 9,999 IMPORT ENTRY ASSOCIATION RECORDS WERE TRANSMITTED.

ASV:	PRT: NARRATIVE MISSING/INCOMPLETE

ONE OR MORE LINES OF NARRATIVE STATEMENT OF THE NATURE AND JUSTIFICATION FOR OBJECTION TO CUSTOMS DECISION IS REQUIRED. THE P90 RECORD CANNOT BE BLANK THERE MUST BE AT LEAST ONE P90 RECORD PER INITIAL PROTEST FILING APPLICATION (CODE PJ).

8XZ:	EXTENSION TOO LATE, ENTRY CLOSED

THIS MESSAGE IS GENERATED IN RESPONSE TO A TIB EXTENSION REQUEST (APPLICATION XN). IF THE EXTENSION REQUEST IS TRANSMITTED ON OR AFTER THE DATE THAT THE TIB ENTRY WAS ALREADY CLOSED, THIS MESSAGE WILL BE GENERATED.

RB0:	ENTRY FEE TRAILER # OUT OF SEQ

FOR RECONCILIATION, THIS MEANS THAT THE SEQUENCING OF THE 'R21' FEE TRAILER RECORDS FOR THE IMPORT ENTRIES IS OUT OF ORDER.

VDB:	INFORMAL FEE CAN'T BE > $2.00

THIS ERROR OCCURS WHEN AN ABI CARGO SELECTIVITY CERTIFIED FILER TRANSMITS AN INFORMAL ENTRY WITH AN INFORMAL FEE4 OF MORE THAN $2.00. THE INFORMAL FEE CANNOT EXCEED $2.00 IF THE FILER IS ABI CARGO SELECTIVITY CERTIFIED.

362:	DWBK CHECK ALREADY ISSUED

CHECK ALREADY ISSUED

VLG:	IMPORT TRAILER # OUT OF SEQUENCE

THIS MESSAGE MEANS THAT THE IMPORT TRAILER SEQUENCE NUMBERS ARE OUT OF SEQUENCE IN THE DRAWBACK MODULE. NOTE THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. IF ONLY 1 CONTRACT IS USED ON A CLAIM, THAT CONTRACT NUMBER SHOULD APPEAR IN THE CLAIM HEADER RECORD. THE CONTRACT TRAILER RECORD SHOULD NOT BE USED UNLESS THERE ARE MULTIPLE CONTRACTS ON A CLAIM. THE CONTRACT TRAILER COUNTER IS NOT A COUNT OF CONTRACTS, BUT IS A COUNT OF THE CONTRACT TRAILER RECORDS. IF ONLY ONE CONTRACT IS USED,THE COUNTER SHOULD BE 00, SINCE THERE WILL BE NO TRAILER RECORDS. IF 2 CONTRACTS ARE USED THERE WILL BE ONE CONTRACT TRAILER AND THE COUNT WILL BE 01. THREE CONTRACTS WOULD MEAN TWO TRAILERS AND THE COUNT WOULD BE 02, ETC.. FOR RECONCILIATION, THIS MEANS THAT THE SEQUENCING OF THE IMPORT ENTRY ASSOCIATION RECORDS ('R20') IS OUT OF ORDER.

G9A:	REMOTE ENTRY/I.T. CONFLICT

IF THE B REC REMOTE ENTRY INDICATOR IS A '1', THE ENTRY DATA CANNOT CONTAIN I.T. NUMBER OF ANY OF THE POSSIBLE FORMATS IN ANY OF THE HA OR OM RECORDS.

RBX:	RECON SITE NOT AUTH FOR IMPORTER

THE DDPP OF THE RECONCILIATION SUMMARY IN THE 'R10' RECORD IS NOT ONE OF THE AUTHORIZED RECONCILIATION FILING LOCATIONS INDICATED IN THE 'RCI' RECORD FOR THE GIVEN IMPORTER.

VKL:	HLT: INITIAL ORDER MUST BE D/N

THE INITIAL SORT ORDER SWITCH MUST BE D=DEFAULT OR N=NONE.

DKX:	D20 RECORD IS REQUIRED

THIS ERROR MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE IF ANY IMPORT ENTRY CITED ON THE CLAIM HAS AN ENTRY DATE ON OR AFTER 4/6/1998. AS OF THAT DATE, THE REPORTING OF TARIFF NUMBERS IS REQUIRED ON THE CLAIM. AT LEAST ONE ABI 'D20' IMPORT TARIFF RECORD IS REQUIRED IF ANY IMPORT ENTRY IS DATED ON OR AFTER 4/6/1998.

VP8:	TOT OWED U.S. MUST = ZERO

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF A "SPACE" IS SENT IN THE D30 RECORD, POSITION 68, IT INDICATES THAT THE ASSOCIATED CANADIAN ENTRY DATA WILL BE PROVIDED. THE SYSTEM THEN LOOKS AT THE TOTAL ESTIMATED DUTY (US) IN THE D30 RECORD, POSITIONS 15-25, AND THIS ERROR MESSAGE WILL BE GENERATED IF THE DUTY IS NOT EQUAL TO ZERO.

EIB:	INVALID EXCHANGE RATE INDICATOR

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE FIXED EXCHANGE RATE INDICATOR IS TRANSMITTED IN THE C01, C18, OR C53 RECORDS. THE TWO ACCEPTABLE VALUES FOR THIS ELEMENT ARE "1" (FIXED RATE APPLIES) OR "0" (NO FIXED RATE APPLIES). ANY OTHER VALUE IN THIS FIELD, INCLUDING BLANKS, WILL GENERATE THIS ERROR MESSAGE.

VOC:	DRAWBACK FILER NOT ON FILE

THIS MESSAGE MEANS THAT THE FILER CODE GIVEN ON THE DRAWBACK DISKETTE DOES EXIST IN ACS.

C04:	BRANCH CODE REQUIRED

IN RECONCILIATION ENTRIES, THE R17 REC, POS 11-12, PROVIDES FOR THE CLIENT BRANCH DESIGNATION OF THE FILER. THE DESIGNATION MUST BE FILLED IN IF THE FILER'S ABEI RECORD INDICATES A 'Y' FOR THE "CLIENT BRANCH" FIELD.

VL3:	DRAWBACK DDPP INVALID

IN THE DRAWBACK MODULE THIS MESSAGE MEANS THAT THE FILER HAS GIVEN US A CLAIM THAT DOES NOT USE ONE OF THE EIGHT CORRECT PORT CODES BY FILING LOCATION:  0401, 1001, 2002, 3901, 5201, 5301, 2704, 2809

VNH:	FD 701: BASE UNIT MUST BE LAST

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31.

 Next 10 >>Showing results 1 to 25 of 1405