ABI Error Message

ASB:	SEQUENCE NUMBER REQUIRED

SEQUENCE NUMBER REQUIRED. THE FILER MAY LIST UP TO 9999 ENTRIES AND TRANSMIT UP TO 9999 LINES OF NARRATIVE. EACH ENTRY AND EACH LINE OF NARRATIVE MUST BE PRECEDED BY 4 CHARACTERS REPRESENTING THE ORDER IN WHICH IT APPEARS, THE FIRST PROTESTED ENTRY WOULD BE 0001.

ASI:	PROTESTED-ISSUE REQUIRED

A ONE-LINE SUMMARY OF THE PROTESTED ISSUE IS REQUIRED AT THE TIME OF FILING OF THE PROTEST, PETITION, OR INTERVENTION. THE PROTESTED ISSUE IS LISTED AS A REQUIRED ELEMENT IN CFR 174.13 AND 181.115 DESCRIBING THE CONTENTS OF PROTESTS AND INTERVENTIONS. THE P70 RECORD IS MISSING OR BLANK.

VA3:	FORM REC TYPE INV/OUT OF SEQ

THIS MESSAGE OCCURS IN A FDA INTERFACE ENTRY. THE REQUIRED ORDER OF FDA LINES IS: FD01 FD02 FD03 FD04 (OPTIONAL) FD05 (OPTIONAL) IF ONE OF THE RECORDS IS OMITTED (E.G. FD01 THEN FD03) THIS MESSAGE WILL OCCUR.

ST2:	NO PEVIOUS SET HEADER PROCESSED

A SET ITEM (SECONDARY SPI OF 'V') WAS ENTERED WITHOUT A SET HEADER (SECONDARY SPI OF 'X') LINE IMMEDIATELY PRECEDING THIS LINE.

2CI:	INBOND - INVALID CHECK DIGIT

ENTRY SUMMARY OR CARGO RELEASE INPUT TRANSACTIONS THAT REPORT PAPERLESS MASTER INBOND NUMBERS (THOSE STARTING WITH "V") MUST TRANSMIT A VALID MIB NUMBER, INCLUDING THE LAST DIGIT (CHECK DIGIT). IF THE LAST DIGIT IS NOT CORRECT, PRESUMING THAT THE FIRST 10 DIGITS ARE CORRECT, THIS ERROR MESSAGE WILL RESULT. THE FILER SHOULD RECONFIRM THE ENTIRE PAPERLESS MIB NUMBER WITH THE ISSUING CARRIER. NOTE: ERRORS IN THE CHECK DIGIT FOR AIR WAYBILLS USED AS INBOND NUMBERS OR FOR CONVENTIONAL (9 DIGIT ALL NUMERIC) INBOND NUMBERS WILL GENERATE ERROR MESSAGE 361.

VBX:	DT HS7: INVALID VEH. ELIGIBIL. #

THIS ELEMENT MUST BE USED WHEN BOX 03 IS INDICATED ON THE DT01 RECORD. IT IS A SIX POSITION FIELD IN THE FORMAT AAANNN, WHERE AAA MAY EQUAL "VSA", "VCP" OR "VSP", FOLLOWED BY THREE NUMERICS FROM 001 THROUGH 999. THE VEHICLE ELIGIBILITY NUMBER TRANSMITTED BY THE FILER MUST COME FROM A LIST ISSUED BY THE DOT WHICH COVERS EVERY VEHICLE MANUFACTURED WITHIN THE LAST 25 YEARS. ***NOTE**** IF THE INSTANT IMPORTATION IS FOR A VEHICLE WHICH WILL BE ADDED TO THE NEXT REVISION OF THE DOT NON-CONFORMING VEHICLE LIST, THE APPROPRIATE ELIGIBILITY INDICATOR IS "PET" (WHICH STANDS FOR PETITION TO ADD NEW VEHICLE TO THE LIST). NO NUMERICS ARE NECESSARY WHEN PET IS TRANSMITTED.

BRI:	BOND NUMBER NOT SAME

THE BOND NUMBER ON ALL IMPORT ENTRIES ASSOCIATED WITH A GIVEN RECONCILIATION SUMMARY (TYPE '09' ENTRY) MUST BE THE SAME. THE BOND MUST BE AN ACTIVITY CODE '1' OR '1A1' BOND. NOTE: IF THIS ERROR MESSAGE OCCURS IN CONJUNCTION WITH ERROR 8PN, THIS MESSAGE MAY NOT BE RELEVANT TO THE ENTRY IN QUESTION. FOR MORE INFORMATION, SEE ERRS 8PN. NOTE: THIS MESSAGE WILL ALSO OCCUR IF MESSAGE 0AA (ENTRY NOT FOUND- MEANING THAT THE ENTRY IN THE IDENTIFIED R20 RECORD IS NOT IN ACS) IS GENERATED. MESSAGE 95I WILL USUALLY OCCUR IN CONJUNCTION WITH MESSAGE 0AA, AS WELL.

VOW:	NON-REMOTE ENTRY ALREADY ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSMISSION. IF A FILER HAS ALREADY ESTABLISHED SELECTIVITY RECORDS IN ACS, VIA THE HI (CARGO RELEASE DATA INPUT) TRANSACTION, THE FILER MAY NOT TRANSMIT AN RLF SUMMARY FILE FOR THE SAME ENTRY NUMBER. IF THE FILER WISHES TO CREATE AN RLF ENTRY FOR THE NUMBER IN QUESTION, THE ORIGINAL SELECTIVITY RECORDS FROM THE HI TRANSACTION WILL HAVE TO BE REMOVED BY PORT PERSONNEL.

VNW:	IMPORT MUST BE IN CUSTOMS STATUS

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE IMPORT ENTRY IS STILL IN ABI STATUS AND HAS NOT BEEN PROCESSED BY CUSTOMS.

322:	INVALID BROKER MODE

MUST BE NUMERIC; 0,1,2, OR 3.

27A:	CENSUS IMPROBABLE COUNTRY

THIS MESSAGE IS AN ABI REPLY TO AN ENTRY SUMMARY (EI) INPUT TRANSACTION. IT INDICATES THAT THE DATA COLLECTED BY CENSUS DOES NOT INDICATE THAT THE TARIFF NUMBER FOR THE LINE IN QUESTION HAS NOT BEEN PREVIOUSLY REPORTED FROM THE TRANSMITTED COUNTRY OF ORIGIN. THE FILER SHOULD VERIFY THE COUNTRY OF ORIGIN AND/OR TARIFF NUMBER AND, IF NECESSARY, MAKE CORRECTIONS. IF THE DATA IS ACCURATE AS TRANSMITTED, NO FURTHER ACTION VIA ABI IS NECESSARY.

95R:	HLD REC ON FILE - 'D' NOT ALLOWED

THIS MESSAGE IS GENERATED WHEN A FILER ATTEMPTS TO TRANSMIT AN ENTRY SUMMARY TRANSACTION (APPLICATION EI) FOR AN ENTRY NUMBER WHICH HAS A LIQUIDATION HOLD ON FILE. HOLDS CAN BE PLACED PRIOR TO THE HARDCOPY DOCUMENTS BEING TENDERED TO CUSTOMS, AND, IF THIS OCCURS, THE ABI FILER CANNOT SUBSEQUENTLY TRANSMIT A 10D INPUT TO REMOVE THE SUMMARY DATA FROM ACS. IF THEY MAKE SUCH AN ATTEMPT, THIS MESSAGE WILL BE GENERATED.`

VON:	ENTRY FLR MUST=PREPARER FLR

THE REMOTE PREPARER FILER CODE SENT IN POSITIONS 51-53 OF THE EI 'B' RECORD MUST BE THE SAME AS THE PROCESSING (ENTRY) FILER CODE, POSITIONS 59-61.

BL2:	UNLAD DP CANNOT EQUAL ENTRY DP

IF AN IN-BOND NUMBER (EITHER CONVENTIONAL OR "V" NUMBER) IS SENT IN POSITIONS 3-14 OF THE 22 RECORD (EI) OR POSITIONS 3-14 OF THE HA RECORD (HI) THEN THE DISTRICT PORT OF UNLADING (POSITIONS 30-33 OF THE EI 20 RECORD OR POSITIONS 65-68 OF THE HI H1 RECORD) CANNOT BE THE SAME AS THE ENTRY DISTRICT PORT.

Q43:	STATEMENT ALREADY PD VIA ACH

THIS MESSAGE WILL RESULT IF A FILER ATTEMPTS TO REMOVE AN ENTRY FROM A STATEMENT FOR WHICH THE ACH PAYMENT AUTHORIZATION TRANSACTION (APPLICATION QN) HAS ALREADY BEEN RECORDED IN ACS. FILERS WILL OFTEN SEND APPLICATION HP (STATEMENT ADD/DELETE) AT OR ABOUT THE SAME TIME THAT THEY TRANSMIT THE ACH PAYMENT. IF BOTH ARE RECEIVED SIMULTANEOUSLY, IT IS VERY LIKELY THAT THE ACH TRANSACTION WILL BE PROCESSED PRIOR TO THE STATEMENT ADD/DELETE. IN SUCH A CASE, THIS ERROR MESSAGE WILL BE THE RESULT.

EJB:	UNITS OF MEASURE MUST BE EQUAL

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD, POS 19-21, IS USED TO REPORT THE UNIT OF MEASURE OF THE QUANTITY REPORTED IN POS 4-18.THIS UNIT OF MEASURE MUST BE IDENTICAL TO THE UNIT OF MEASURE REPORTED IN THE C33 RECORD, POS19-21. IF THE UNITS ARE NOT IDENTICAL, THIS ERROR MESSAGE WILL RESULT.

VKN:	HLT:O INVALID W/ OVERRIDE CRIT.N

SUBSEQUENT SORT ORDER O=OVERRIDE IS INVALID WHEN OVERRIDE CRITERIA N=NO.

VLS:	DRAWBACK INSPECTION IND INVALID

THIS ERROR MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' ("YES") OR 'N' ("NO") FOR WHETHER THIS IS AN INSPECTION CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR SPACE ("NO") OR '1' ("YES") FOR ABI.

VEJ:	FC 740:TRADE NAME REQ

AN FCC TRADE NAME OF THE PRODUCT IMPORTED MUST BE SENT IN THE FC01 RECORD, POSITIONS 28-57.

VEW:	FDA STATUS CONFLICTING/NOT ALLOWD

THIS ERROR MESSAGE IS AN INTERNAL REJECT MESSAGE BETWEEN CUSTOMS ACS AND FDA'S SYSTEM. IT OCCURS WHEN FDA ATTEMPTS TO SEND A PROCESSING STATUS ON AN ENTRY THAT HAS ALREADY BEEN PROCESSED WITH THE SAME STATUS OR A STATUS THAT DENOTES A COMPLETION OF THE ENTRY. THIS MESSAGE DOES NOT GO TO THE FILER NOR DOES IT AFFECT THE FDE STATUS OF THE ENTRY.

Q01:	INPUT RECORD TYPE MUST BE "QT"

POSITIONS 1&2 ON EACH INPUT RECORD WITHIN THE "QN" APPLICATION MUST BE "QT" .

002:	INVALID UNIT OF MEASURE

UNIT OF MEASURE INPUT IS NOT AN ACCEPTED ALPHA-NUMERIC CODE, OR IS FORMATTED INCORRECTLY. FOR AUTOMATED INVOICE INPUT PURPOSES, THE ABOVE MESSAGE RELATES TO DATA TRANSMITTED IN THE C33 REC, POS 19-21 OR 61-63. VALID UNITS OF MEASURE (AS LISTED IN APPENDIX C OF THE CATAIR) SHOULD BE REPORTED IN THESE TWO FIELDS; HOWEVER, ANY REASONABLE ABBREVIATION WILL BE ACCEPTED IN THE CI APPLICATION (I.E. "DOZ" OR "DZ" FOR DOZEN, ETC.) IF POS 19-21 OR 61-63 ARE BLANK, AND A QUANTITY IS TRANSMITTED IN POS 4-18, THIS ERROR MESSAGE WILL BE GENERATED.

VGA:	FD701: INV LINE#/SEQ

THIS ERROR MESSAGE RESULTS WHEN A FILER SENDS AN FDA CORRECTION (CP TRANSACTION) TO RESPOND TO AN FDA DT REJECT MESSAGE AND THE CUSTOMS LINES THAT THEY ARE SENDING IN THE FDA CORRECTION DO NOT MATCH THE EXACT SEQUENCE OF LINES IN THE SELECTIVITY RECORD. WHEN A CORRECTION IS DONE, THE FILER MUST SEND THE CUSTOMS LINES (WITH THE CORRESPONDING FDA DATA OR DISCLAIM AS APPLICABLE) IN THE EXACT ORDER AS IT APPEARS ON THE SELECTIVITY LINE ITEM SCREEN. THE FILER MUST ALSO SEND ALL CUSTOMS LINES WHETHER OR NOT THEY ARE FDA REGULATED. CHECK THE ORDER OF THE TARIFF NUMBERS IN THE CP SEND AGAINST THE SELECTIVITY LINE ITEM SCREEN. THEY MUST MATCH EXACTLY. THIS MESSAGE ALSO RESULTS WHEN A FILER ATTEMPS TO START A FDA LINE NUMBER WITHIN A CUSTOMS LINE WITH A NUMBER OTHER THAN 001. THE MOST COMMON OCCURANCE IS WHEN CUSTOMS LINE 001 IS SENT AND, FOR EXAMPLE FDA LINES 001 AND 002 ARE SENT WITH IT. THEN THE FILER SENDS CUSTOMS LINE 002 AND STARTS THE FDA LINE NUMBERING WITH 003. THIS REJECT WILL ALSO OCCUR IF THE FILER SENDS BOTH AN FD0 (DISCLAIM) AND FDA DATA FOR THE SAME CUSTOMS LINE ON AN ENTRY SUMMARY INPUT TRANSACTION.

4CC:	ENTRY TYPE MUST BE QUOTA

COMMODITIES LISTED ON THE HARMONIZED TARIFF DATABASE FILE THAT ARE SUBJECT TO QUOTA REPORTING FROM SELECTED COUNTRIES MUST BE ENTERED USING AN APPROPRIATE QUOTA ENTRY TYPE CODE. CURRENTLY, "02" (CONSUMPTION QUOTA ENTRY) OR "07" (COMBINATION QUOTA/ADD OR CVD ENTRY TYPE) ARE THE TWO QUOTA ENTRY TYPES.

VPE:	WHSE TYPE/CLAIM TYPE CONFLICT

THIS REJECT OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF THE CLAIM TYPE INDICATOR IN THE D01 RECORD, POSITION 4 EQUALS '1', THEN THE WAREHOUSE ENTRY PROCESS TYPE IN THE D10 RECORD, POSITION 46 MUST BE EITHER A '1' OR '2'.

 Next 10 >>Showing results 1 to 25 of 1405