ABI Error Message

VEM:	FC 740:QTY EXCEEDS 03 ALLOWANCE

THE QUANTITY FOR AN 03 IMPORT CONDITION NUMBER CANNOT EXCEED 200 UNITS WITHOUT PRIOR APPROVAL. IF QUANTITY EXCEEDS 200, REPORT PRIOR APPROVAL BY SENDING A "Y" IN POSITION 7 OF THE FC01 RECORD, DATA ELEMENT "03 IMPORT CONDITION NUMBER QUANTITY APPROVAL".

ARV:	REFUND PARTY ID NBR REQUIRED

A VALID IRS OR USCS ASSIGNED ID NUMBER PRESENT ON THE USCS IMPORTER DATABASIS REQUIRED FOR ALL REFUND C/O PARTY TYPES.

364:	CHECK DIGIT INVALID OR MISSING

ENTRY NUMBER ASSIGNMENT: YOU MAY NOT UPDATE THE ENTRY NUMBER ASSIGNMENT FILE FOR THIS DISTRICT. THIS DISTRICT IS NOT ONE OF YOUR ASSIGNED LOCATIONS. CHECK THE CHECK DIGIT IN THE TSUS/HSUS NUMBER

180:	ENTRY NBR CHECK DIGIT MISMATCH

THE ENTRY NUMBER AND/OR ENTRY NUMBER CHECK DIGIT USED IN THE DRAWBACK DISKETTE MODULE IS INCORRECT BASED ON THE MATHEMATICAL CHECK-DIGIT COMPUTATION PERFORMED BY ACS.

BRM:	POSSIBLE FEE MISMATCH

THE ORIGINAL FEE AMOUNT FOR A GIVEN FEE CLASS CODE IN THE RECON'S 'R21' RECORD DOES NOT AGREE WITH WHAT USCS SHOWS AS BEING THE FEE AMOUNT FOR THAT CLASS CODE ON THE ORIGINAL IMPORT ENTRY. THIS MESSAGE USUALLY RESULTS WHEN ABI ATTEMPTS TO VERIFY THAT THE INDIVIDUAL FEE CLASS AMOUNTS ON THE IMPORT ENTRY AGREE WITH THE AMOUNTS REPORTED IN THE RECON ENTRY (R21 RECORD). IF THE IMPORT ENTRY HAS BEEN RED-LINED DURING THE LIQUIDATION PROCESS, THE USFI RECORD (WHERE FEES ARE DISPLAYED BY CLASS CODE AND AMOUNT) WILL BE BLANK AND THE LNLI RECORDS (ENTRY LINE DATA FOR THE IMPORT ENTRY) IS ALSO LIKELY TO BE BLANK. THUS ABI HAS NO FILE TO SEARCH TO VERIFY THE HMF OR MPF AMOUNT CLAIMED BY THE RECON FILER IN ITS R21 RECORD. THIS MESSAGE IS A WARNING, HOWEVER, AND WILL NOT, IN AND OF ITSELF, CAUSE A RECON ENTRY TO BE REJECTED.

CC7:	DESCRIPTION REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE CB1 RECORD IS USED TO REPORT ADDITIONAL MARKS AND NUMBERS AT THE INVOICE HEADER LEVEL WHEN THE CA1 RECORD DOES NOT PROVIDE SUFFICIENT SPACE TO COMPLETELY REPORT THE SHIPPING MARKS AND NUMBERS. IF THE CB1 RECORD IS TRANSMITTED, IT CANNOT BE BLANK OR THIS ERROR MESSAGE WILL BE GENERATED.

BRP:	FEE COUNT MISMATCH (R20:R21)

THE COUNT GIVEN IN THE 'R20' RECORD FOR THE FEE TRAILER COUNTER DOES NOT MATCH THE COUNT FOR THE NUMBER OF 'R21' FEE RECORDS SUBMITTED FOR RECONCILIATION VIA ABI.

EIS:	LOCATION OR LOC CODED REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 RECORD REPORTS THE LOCATION OF THE INVOICE DELI TERMS. POS 9-10 AND 11-15 MUST BE REPORTED IN COMBINATION TO REPORT A LOCATION CODE IDENTIFIER AND THE LOCATION CODE. IF THESE ARE NOT TRANSMIT THE ACTUAL LOCATION MUST BE TRANSMITTED IN POS 16-50. IF ALL THREE ELEMENTS ARE BLANK IN THE C13 RECORD, THIS ERROR MESSAGE WILL BE GENERATED. THE SAME MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

661:	IMPORTER NUMBER SUFFIX IS INVALID

THE LAST TWO SPACES ON THE IR# FORMAT MAY NOT END IN OO, ZZ OR II.

01Q:	ENA RECORD HAS BEEN CANCELLED

ABI REJECT FOR CASE WHEN ENA01-ENTRY-CANCELLED IS TRUE.

ARX:	NOTIFY DP/FLR/OFFICE REQ'D

A BLANK OR INCORRECT SUBSTITUTE RECORD WAS TRANSMITTED. THE DDPP/FILER CODE OFFICE CODE OF THE SUBSTITUTE MUST BE SENT AND A MATCH FOUND IN THE ABI PROFILE .

01C:	RELATED PARTY IND. MUST BE Y OR N

THIS MESSAGE WILL BE GENERATED IF THE 50 REC, POS 77 DOES NOT REFLECT EITHER A "Y" OR AN "N" IN THE FILER'S TRANSMISSION OF THE ENTRY SUMMARY DATA (APPLICATION EI).

B15:	INSUFFICIENT DATA IN FIRM OR CITY

INPUT FIRM NAME OR CITY NAME FIELD DOES NOT CONTAIN ENOUGH CHARACTERS TO CREATE A MANUFACTURER ID. IN ABI, THIS MESSAGE CAN OCCUR IF THE FILER TRANSMITS LOWER CASE LETTERS IN THE FIRM NAME OR CITY NAME FIELD, BUT THE FIRST LETTER OF THE FIRM NAME AND CITY NAME IS A CAPITAL LETTER.

VQP:	MISSING FTZ NUMBER

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. IF THE CLAIM TYPE INDICATOR IN THE D01 RECORD, POSITION 4 IS A '2' (FTZ) THEN THE IMPORT FTZ NUMBER IN THE D10 RECORD, POSITIONS 28-34 CANNOT BE SPACES.

VEL:	FC 740:QUANTITY MUST BE > ZERO

IF THE CONDITIONAL FCC FC02 RECORD IS SENT, THE FCC QUANTITY IN POSITIONS 5-16 OF THIS RECORD MUST BE GREATER THAN ZERO.

VGM:	FD 701: QTY IND;PREV QTY=0'S

UP TO SIX QUANTITIES CAN BE SENT IN THE FDA INTERFACE. IF ZEROS WERE TRANSMITTED IN A PRECEDING QUANTITY BLOCK AND A QUANTITY WAS TRANSMITTED IN THE INSTANT BLOCK, THIS ERROR MESSAGE RESULTS. FOR INSTANCE, IF ZEROS ARE TRANSMITTED IN THE UNIT 1 QUANTITY BLOCK OF REC FD02, POS 5-14 AND 0000000009 TRANSMITTED IN THE UNIT 2 QUANTITY BLOCK OF REC FD02, POS 19-28, THIS ERROR MESSAGE OCCURS.

ADW:	MOT MISMATCH ON CONSL RELEASE

THE MOT'S (MODE OF TRANSPORTATION) MUST BE THE SAME FOR ALL OF THE RELEASES ON A CONSOLIDATED ENTRY.

AEQ:	ERROR IN A32 REC;RLSE 4

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. " 1F5 RELEASE NOT ON FILE") IN A CONSOLIDATED ENTRY SUMMARY TRANSMISSION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE FOURTH RELEASE IN THE 32 RECORD.

4GP:	ONLY COUNTRY VALID FOR OPTION C

THIS MESSAGE IS GENERATED IN REPLY TO AN ABI QUOTA QUERY. IF THE FILER REQUESTS ALL VISA RECORDS FOR A GIVEN COUNTRY OF ORIGIN (OPTION C IN POS 25 OF THE U1 INPUT RECORD), THE INPUT RECORD CANNOT ALSO REQUEST INFORMATION FOR A GIVEN VISA NUMBER, TARIFF NUMBER OR CATEGORY NUMBER IN THE SAME U1 INPUT RECORD

FD2:	PRODUCT CODE INVALID

PRODUCT CODE INVALID: IT CAN ONLY CONTAIN NUMERIC, ALPHA, OR HYPHENS IN POSITIONS 4 & 5. SPACES ARE NOT ALLOWED IN ANY POSITIONS.

AFJ:	CVD BOND AMT/TYPE INVALID; 35 REC

THE CVD BOND TYPE IN REC 35, POS 37 MUST BE A "0" OR "1". THE USE OF ANY OTHER NUMERIC, SPACE OR SPECIAL CHARACTER WILL RESULT IN THIS ERROR MESSAGE. IF THE BONDED COUNTERVAILING DUTY AMOUNT (35 REC, POS 26-36) DOES NOT AGREE WITH THE COUNTERVAILING DUTY AMOUNT IN THE 60 REC, POS 3-12, THIS ERROR MESSAGE WILL BE GENERATED. IF BOTH AMOUNTS AGREE, BUT DO NOT EQUAL THE CALCULATED COUNTERVAILING DUTY AMOUNT, AS DETERMINED BY ACS, ERROR MESSAGE AAZ "ADD/CVD DUTY COMP MISMATCH" WILL RESULT.

DK5:	TARIFF TRAILER OUT OF SEQUENCE

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THE CANADIAN IMPORT ENTRY TRAILER SEQUENCE NUMBERS (0001-9999) ARE OUT OF SEQUENCE (EG: 0001, 0003, 0002 INSTEAD OF 0001, 0002, 0003). NOTE THAT CONTRACT SEQUENCE NUMBERS ARE 01-99. FOR CANADIAN IMPORTS, TRAILERS ARE SEQUENCED 00001-99999.

169:	INVALID COUNTRY CODE

THE COUNTRY CODE IS NOT ON FILE. IN ABI, THIS ERROR MESSAGE CAN RESULT WHEN THE FILER TRANSMITS APPLICATION EI (ENTRY SUMMARY) AND INCLUDES A 42 RECORD BUT OMITS THE SUPPLIER ID NUMBER. THE FIRST TWO CHARACTERS OF THIS RECORD REPRESENT THE ISO COUNTRY CODE. IF THE SUPPLIER ID IS BLANK, ABI INTERPRETS THIS AS AN INVALID ISO CODE AND GENERATES THIS ERROR MESSAGE.

VAB:	FC 740:INV 03 APPROVAL IND

THE QUANTITY FOR AN 03 IMPORT CONDITION NUMBER CANNOT EXCEED 200 UNITS WITH PRIOR APPROVAL. IF QUANTITY EXCEEDS 200, REPORT PRIOR APPROVAL BY SENDING A "Y" IN POSITION 7 OF THE FC01 RECORD, DATA ELEMENT "03 IMPORT CONDITION NUMBER QUANTITY APPROVAL." THIS MESSAGE ALSO OCCURRED IN AN ENTRY WHERE THE FILER SENT A '1' IN POSITION 7 EVEN THOUGH THE QUANTITY WAS LESS THAN 200.

8WP:	INTENSIVE EXAM DATE EXCEEDED

THIS MESSAGE WILL USUALLY BE GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). FILERS ARE PERMITTED, WITHIN SET LIMITS, TO CHANGE THE ESTIMATED ARRIVAL DATE CREATED BY THEIR INITIAL CARGO RELEASE INPUT. (SEE ERROR MESSAGE 8WQ, 8WK, AND 8WO). ANOTHER RESTRICTION IS THAT THE ESTIMATED ARRIVAL DATE CANNOT EXCEED THE DATE OF ANY INTENSIVE EXAMINATION DATE THAT HAS BEEN ENTERED ON THE SSAI RECORD. IF THE FILER'S LN INPUT CONTAINS SUCH A DATE, THIS ERROR MESSAGE WILL BE GENERATED.

 Next 10 >>Showing results 1 to 25 of 1405