ABI Error Message

B08:	MID CODE NOT ON FILE

INPUT MANUFACTURER IDENTIFIER FIELD DOES NOT EXIST ON THE MANUFACTURER DATABASE. THIS ERROR IS GENERATED IN RESPONSE TO A MANUFACTURER QUERY, ABI APPLICATION $N.

APS:	HARDCOPY INDICATOR INVALID

NOTIFICATION TO CUSTOMS THAT HARDCOPY MATERIALS HAVE BEEN SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT ANY TIME PRIOR TO ADJUDICATION OF PROTEST OR CLAIM BY CUSTOMS. 'N' INDICATES THAT HARDCOPY MATERIALS DO NOT APPLY. ONCE TO 'S' THE HARDCOPY INDICATOR CAN NOT BE UN-SET TO 'N'. THE VALUE SUBMITTED HARDCOPY INDICATOR CANNOT BE UN-SET TO 'N'. THE VALUE SUBMITTED IN THE HARDCOPY INDICATOR IS NOT 'S' OR 'N'.

04G:	PC: MOT=AIR BUT V/F/T MISSING

ENTRY IS PAIRED CITIES, CARRIER CODE IS INVALID, MODE OF TRANSPORTATION IS AIR, BUT V/F/T IS MISSING.

LU1:	LUMBER PERMIT/ORIG CNTRY INVALID

LUMBER PERMIT CANNOT BE ENTERED FOR COUNTRY OF ORIGIN OF 'CA' .

APN:	VOIDANCE REQST NOT VALID

A REQUEST FOR VOIDANCE OF DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 90 DAYS AFTER PROTEST HAS BEEN DENIED BY CUSTOMS. THE VOIDANCE REQUEST INDICATOR IS ALREADY SET AT 'R' (AFFIRMATIVE FOR REQUEST), OR THE PROTEST IS NOT IN DENIED STATUS.

VP5:	ENTRY SUMM ALREADY ON FILE

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE WHEN THE NAFTA CLAIM ENTRY SUMMARY NUMBER SENT IN POSITIONS 11-21 OF THE D01 RECORD ALREADY EXISTS AS A CLAIM.

AD1:	HOUSE INVALID WITHOUT MASTER

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). IF A HOUSE BILL IS TRANSMITTED IN THE HA RECORD, POSITION 27-38, A MASTER BILL NUMBER IS REQUIRED IN POSITIONS 15-26.

99P:	ADDITIONAL WARNING ON ERRORS

NUMBER OF MESSAGES PASSED BACK TO PROGRAM CALLING ABIGI1 EXCEEDS 10.

DKV:	INVALID PETROLEUM INDICATOR

IN THE AUTOMATED DRAWBACK MODULE, THE 'D11' RECORD WILL CONTAIN A SPACE IF NOT A PETROLEUM CLAIM OR A '1' IF IT IS PETROLEUM. ANY OTHER INDICATORS GIVEN WILL CAUSE THIS ERROR.

95W:	52 REC - 'HK' SWPM IND INVALID

THE REQUIRED SOLID WOOD PACKING MATERIAL INDICATOR MUST BE '1' OR '2'.

452:	CHARGES AMOUNT INVALID

IF THERE ARE NO CHARGES, OR CHARGES ARE LESS THAN $ 1 AN "X" WILL BE LISTED AS VALUE OF CHARGES. IN CASE OF OVERLAND SHIPMENTS ARRIVING FROM MEXICO OR CANADA "X" IS ALWAYS SHOWN. IF AGGREGATE CHARGES COVER MERCHANDISE ENTERED UNDER SEVERAL ITEM NUMBERS, AND EXACT BREAKDOWN IS UNKNOWN, CHARGES SHALL BE PRORATED BY VALUE. THE ABOVE DOES NOT APPLY TO ABI TRANSMISSIONS. CHARGES ARE TRANSMITTED IN THE ENTRY SUMMARY INPUT (EI) IN THE 40 REC, POS 48-57. CHARGES ARE REQUIRED FOR ALL MOT'S EXCEPT 60 (HAND-CARRIED) AND FOR ALL ENTRIES EXCEPT INFORMAL ENTRIES. AN AMOUNT OF AT LEAST ONE DOLLAR IS REQUIRED FOR THIS FIELD. ABI WILL NOT ACCEPT "X" FOR CHARGES FOR SHIPMENTS FROM EITHER MEXICO OR CANADA. LINE VALUES LESS THAN $2,000 ($250 FOR SOME TEXTILE PRODUCTS) DO NOT REQUIRE CHARGES TO BE TRANSMITTED.

EJN:	ID NUMBER (B) REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C37 RECORD PROVIDES SPACE FOR TWO IDENTIFICATION NUMBERS. THE SECOND (IDENTIFIER B) IS REPORTED IN POS 45-79.IF ONE OF THE FOUR VALID ID NUMBER QUALIFIERS (SEE PAGE AII-34) IS REPORTED IN POS 42-44 OF THE C37 RECORD, THERE MUST BE DATA IN POS 45-79 (THE DATAMUST BE LEFT JUSTIFIED STARTING IN POSITION 45 BUT DOES NOT HAVE TO OCCUPY THE ENTIRE FIELD). IF THE FIELD IS LEFT BLANK, THIS ERROR MESSAGE WILL BE GENERATED. **NOTE** - AS OF APRIL 1998, ONLY THE ID NUMBER QUALIFIER "VIN" IN POS 42-44 WILL RESULT IN THIS MESSAGE IF THE ID NUMBER FIELD IS LEFT BLANK.

VBM:	FW 3-177: INVLD PURPOSE

THE PURPOSE CODE (REC FW03, POS 22-23) IS A MANDATORY CODE CONSISTING OF ONE ALPHA CHARACTER WHICH SHOULD APPEAR IN POS 22. (POSITION 23 IS RESERVED FOR FUTURE USE AND SHOULD BE SPACE FILLED.) THE ONLY ALPHA CHARACTER PERMITTED IS C (COMMERCIAL), N (NON-COMMERCIAL), M (MUSEUM EXCHANGE), S (SCIENTIFIC RESEARCH), OR Z (ZOOLOGICAL EXCHANGE).

89E:	FEE CODE ENTERED/NOT REQUIRED

THIS MESSAGE WILL BE GENERATED IF A FEE IS TRANSMITTED IN THE 62 RECORD FOR A TARIFF NUMBER THAT DOES NOT CONTAIN A FLAG FOR THAT FEE ON THE TARIFF FILE. THE MOST COMMON EXAMPLE IS THE TRANSMISSION OF A COTTON FEE, CLASS CODE 056, FOR A TARIFF NUMBER THAT DOES NOT HAVE A COTTON FEE ON ITS CURRENT RECORD. FILERS SHOULD VERIFY THE APPLICABILITY OF THE FEE FROM THE TARIFF FILES. THIS MESSAGE WILL ALSO RESULT IF CERTAIN FEES ARE TRANSMITTED INCORRECTLY ON A SET ENTRY. IN THIS CASE, THE MPF FEE (499) AND THE HMF (501) FEES MUST ONLY BE TRANSMITTED WITH THE "X" LINES. OTHER TARIFF SPECIFIC FEES CAN ONLY BE TRANSMITTED WITH THE APPROPRIATE "V" LINES. THIS MESSAGE IS ALSO GENERATED IF THE AMOUNT OF THE COTTON FEE, CALCULATED BY ACS, IS LESS THAN $2.01, USING THE CORRECT RATE. ACS WILL NOT DISPUTE THE FILER'S AMOUNT OF COTTON FEE IN SUCH A SITUATION. IT WILL MERELY ADVISE THE FILER THAT NO FEE IS REQUIRED.

03L:	INVALID IT NUMBER

CONVENTIONAL INBOND NUMBERS MUST BE 9-DIGITS LONG AT THE CURRENT TIME. TRANSMISSIONS THAT CONTAIN FEWER THAN 9 DIGITS WILL RESULT IN THIS ERROR MESSAGE.

B99:	ACH TRANS TYPE = 24; AMT MUST = 0

ACH TRANS TYPE (IN 6 RECORD) = 24 WHICH INDICATES $0.00 STATEMENTS. HOWEVER ADDENDA AMT (IN 7 REC) DOES NOT = $0.00.THIS IS PART OF THE ACH CREDIT PROCESS.

VNL:	AUTOCERT INVALID - OGA LINE RLSE

THIS MESSAGE OCCURS IN AN ENTRY SUMMARY TRANSACTION WHEN THE FILER ATTEMPTS TO CERTIFY FOR CARGO SELECTIVITY FOR AN ENTRY NUMBER WHICH WAS RELEASED AS A FDA LINE RELEASE ENTRY. THE FILER MUST SEND THE EI TRANSACTION WITHOUT CARGO RELEASE CERTIFICATION AND SEND A '1' IN POSITION 80 OF THE EI 10 RECORD WHICH IDENTIFIES THE ENTRY AS A FDA LINE RELEASE ENTRY. NOTE: THE ABOVE MESAGE WILL ALSO BE GENERATED FOR AN ENTRY NUMBER THAT HAS NOT BEEN PROCESSED THROUGH LINE RELEASE IF THE SAME CONDITIONS AS OUTLINED ABOVE EXIST (CARGO CERT IN POS 38 OF THE 30 RECORD ACCOMPANIED BY A 1 IN POS 80 OF THE 10 REC). THUS, THIS MESSAGE WILL RESULT ON NON-LINE RELEASE ENTRIES IF THE AUTO CERTIFICATION INDICATOR IS "1" AND THE OGA INDICATOR IS ALSO TRANSMITTED. (IF A TRUE NON-LINE RELEASE ENTRY, THE CORRECTION IS TO REMOVE THE OGA INDICATOR IN THE 10 RECORD).

VNO:	EXPORT SUM INVALID FOR BOND TYPE

IN THE DRAWBACK MODULE THE EXPORT SUMMARY INDICATOR MAY ONLY BE A 'Y' (OR '1' IF ABI) IF THE BOND TYPE CODE IS NOT '0' (WOULD BE EITHER '8' OR '9'), UNLESS THE GOVERNMENT CLAIM INDICATOR IS ALSO 'Y' (OR '1' IF ABI). IF 'Y' (OR '1' IF ABI) IS USED AND THE CONDITION IS NOT CORRECT, MESSAGE VNO APPEARS.

0B0:	INVALID 'ISO' COUNTRY CODE

THE COUNTRY CODE ENTERED IS NOT ONE OF THE VALID 'ISO' COUNTRY CODES. FOR THE AUTOMATED INVOICE INTERFACE APPLICATION (CI), THIS MESSAGE INDICATES THAT THE COUNTRY CODE IN THE C11 REC, POS 57-58, IS EITHER BLANK OR DOES NOT APPEAR ON THE LIST OF VALID ISO COUNTRIES.

4NN:	LINE ITEM VALUE ERROR

IF A FILER TRANSMITS A CARGO RELEASE DATA TRANSACTION (APPLICATION HI), AND ALSO ELECTS TO REPORT VALUES AT THE LINE ITEM LEVEL (H5 REC, POS 45-54), THE TOTAL OF ALL VALUES IN THE H5 RECORD MUST EQUAL THE AMOUNT SHOWN AS THE TOTAL ENTRY VALUE (H2 REC, POS 29-38). THE TOTAL DOES NOT AGREE, THIS ERROR MESSAGE WILL BE GENERATED.

DE5:	CONTRACT NUMBER NOT FOUND

THIS MESSAGE MEANS THAT THE CONTRACT NUMBER SENT IN THE DRAWBACK MODULE WAS NOT ON FILE IN ACS. IN MOST CASES, THE FILER WILL PROBABLY HAVE USED AN OLD NUMBER, NOT ONE OF THE NEW CONTRACT NUMBERS.

AQX:	LEAD PROTEST NBR NOT ON FILE.

THE NUMBER ENTERED IN THE LEAD PROTEST NUMBER FIELD IS NOT A VALID CUSTOMS ASSIGNED PROTEST NUMBER.

AE2:	PO BOX NOT ALLOWED IN 2ND ADDRESS

THIS MESSAGE IS GENERATED IN RESPONSE TO AN "ADD 5106" INPUT TRANSACTION, APPLICATION IDENTIFIER TI. FOR COMPANIES WITH FOREIGN ADDRESSES, ONLY ONE LINE OF ADDRESS DATA IS PERMITTED AND A POST OFFICE BOX IS NOT PERMITTED IN THE ADDRESS LINE. THIS MESSAGE WILL BE GENERATED IF THE T2 OR TB RECORD CONTAINS A POST OFFICE BOX.

VKR:	HLN:MAX 5 OVERRIDE FLDS EXCEEDED

A MAXIMUM OF FIVE FIELDS MAY BE SELECTED FOR FORMULATE OVERRIDE SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

VNH:	FD 701: BASE UNIT MUST BE LAST

IN THE FDA INTERFACE, UP TO SIX QUANTITIES AND UNITS OF MEASURE (UOM) CAN BE TRANSMITTED. FIVE QUANTITIES/UOM CAN BE SENT IN REC FD02, POS 5-18, 19-32, 33-46, 47-60 AND 61-74 (CATAIR, PAGE OGA-30). THE SIXTH, IF APPLICABLE, IS SENT IN REC FD04, POS 5-18 (CATAIR, PAGE OGA-35). IF QUANTITIES/UOM'S ARE SENT THEN AT LEAST ONE OF THEM MUST BE A "BASE UNIT" AND IF MORE THAN ONE IS SENT THE BASE UNIT MUST BE IN THE LAST POSITION. IF, FOR EXAMPLE, THREE QUANTITIES/UOM'S ARE SENT THE BASE QUANTITY MUST BE IN THE "UNIT 3 QUANTITY AND MEASURE BLOCK (REC FD01, POS 33-46). IF ONLY ONE QUANTITY/UOM IS SENT IT MUST BE A BASE UNIT AND SENT IN THE UNIT 1 QUANTITY AND MEASURE BLOCK (REC FD01, POS 1-18). FDA BASE UNITS ARE SHOWN IN THE CATAIR, PAGES OGA-31.

 Next 10 >>Showing results 1 to 25 of 1405