ABI Error Message

8WW:	MASTER BL/AWB NUMBER REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). IF THE L3 RECORD IS TRANSMITTED, AT A MINIMUM, THE BILL OF LADING (OR AIR WAYBILL) NUMBER, THE MANIFESTED QUANTITY AND THE MANIFESTED UNIT OF MEASURE ARE REQUIRED. OTHER ELEMENTS ON THE L3 RECORD ARE OPTIONAL. IF ONE OR MORE OF THE REQUIRED ELEMENTS ARE NOT PRESENT IN THE L3 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

33C:	DATE OVER 90 DAYS INTO FUTURE

THE END DATE CANNOT BE OVER 90 DAYS UNLESS IT IS INDEFINITE. IN ADDITION TO THE ABOVE DEFINITION, IF ABI FILERS TRANSMIT ENTRY SUMMARY DATA WITH A PAYMENT DUE DATE MORE THAN 90 DAYS IN THE FUTURE, AS COMPARED TO THE TRANSMISSION DATE, THIS ERROR MESSAGE WILL BE GENERATED.

AEO:	ERROR IN A32 REC; RLSE 2

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. 1F5 RELEASE NOT ON FILE) IN A CONSOLIDATED ENTRY SUMMARY TRANSACTION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE SECOND RELEASE IN THE 32 RECORD.

1M9:	IT DATE MORE THAN 2 YEARS OLD

MORE THAN 2 YEARS OLD

EJY:	UNIT OF MEASURE REQUIRED

IF THE FILER SENDS A QUANTITY IN THE SUMMARY INPUT (EI APPLICATION, REC 22, POS 51-58) AND DOES NOT ALSO INCLUDE A UNIT OF MEASURE (REC 22, POS 51-58) THIS ERROR MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE CARGO RELEASE INPUT (HI APPLICATION, REC HA, POS 51-58 FOR THE UNIT OF MEASURE). IN THE AUTOMATED INVOICE TRANSACTION (APPLICATION CI), THIS ERROR MESSAGE IS SOMEWHAT MISLEADING. IF THE C34 RECORD IS TRANSMITTED, THE FIRST QUANTITY FIELD, POS 4-18, MUST BE GREATER THAN ZERO. THE FIRST UNIT OF MEASURE IN POS 19-21 IS OPTIONAL. IF THE SECOND UNIT OF MEASURE, POS 37-39, IS TRANSMITTED WITHOUT A SECOND QUANTITY IN POS 22-26, THIS ERROR MESSAGE IS GENERATED. A BETTER MESSAGE WOULD BE "UOM NOT ALLOWED WITH QUANTITY."

681:	CUSTOMS REL VIA EREL ON FILE

THIS ERROR MESSAGE OCCURS WHEN A FILER ATTEMPTS TO SEND SELECTIVITY DATA FOR AN ENTRY THAT HAS BEEN PREVIOUSLY RELEASED. A FILER WILL RECEIVE THIS MESSAGE WHETHER THE RELEASE OF THE ENTRY NUMBER WAS VIA A "PAPERLESS" MESSAGE OR "DOCS REQUIRED".  IN THE LATTER CASE, ONCE THE ON-LINE PROCESSING HAS BEEN COMPLETED, A RETRANSMISSION OF THE CARGO DATA WILL GENERATE THIS MESSAGE AT THE TIME OF HI TRANSMISSION.

VAA:	FC 740:INV IMPORT CONDTN NBR

THE IMPORT CONDITION NUMBER IS SENT IN THE FC01 RECORD, POSITIONS 5-6. A CODE OF 01 - 08 IS SENT IDENTIFYING THE FCC IMPORT CONDITION. ANY OTHER CODES WILL BE REJECTED.  SEE PAGE OGA-25, CATAIR.

84N:	US ADDR SHOULD HAVE IR NBR OR SSN

BROKER CANNOT REQUEST CUSTOMS-ASSIGNED NUMBER FOR U.S. ADDRESS.

VOH:	PREPARER/REMOTE IND CONLICT

THE REMOTE PROCESSING DISTRICT PORT IS SENT IN THE 'B' RECORD, POSITIONS 47-50. THE REMOTE PREPARER FILER IS SENT IN THE 'B' RECORD, POSITIONS 51-53. IF THE REMOTE PREPARER INDICATOR IN POSITION 56 OF THE 'B' RECORD IS SET TO '1' (YES) THEN THE DDPP/FILER MUST BE SET UP IN THE ABI BROKER REMOTE FILING LOCATIONS FILE.

BR3:	RECON DUTY MISMATCH (R20:R90)

THE TOTAL RECONCILED DUTY FROM THE SUM OF ALL 'R20' RECORDS DOES NOT MATCH TOTAL RECONCILED DUTY AS REFLECTED BY THE FILER IN THE RECON'S 'R90' RECORD THIS APPLIES TO ENTRY-BY -ENTRY RECONCILIATION.

95V:	52 REC - 'HK' SWPM IND MISSING

A SOLID WOOD PACKING MATERIAL CERTIFICATE INDICATOR IS REQUIRED FOR ALL LINES WITH A COUNTRY OF ORIGIN OF 'CN' (CHINA) OR 'HK' (HONG KONG) AND AN EXPORT = OR > 12/17/1998.

AI5:	CASE NUMBER/COUNTRY MISMATCH

ADA/CVD QUERY INPUT CONTAINS A CASE NUMBER AND A COUNTRY ISO CODE THAT ARE RELATED. CASE NUMBER IS NOT VALID FOR GIVEN COUNTRY OR VICE VERSA.

618:	SURETY REVOKED

THE SURETY CODE REPORTED BY AN ABI FILER IN THE SUMMARY INPUT (10 REC, POS 73-75 OR THE CARGO RELEASE INPUT (H1 REC, POS 71-73) IS IN REVOKED STATUS ON THE SURETY MAINTENANCE DATABASE.

VPF:	EXPORT TARIFF NOT FOUND

THIS MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT TARIFF NUMBER IS SENT IN THE D10 RECORD, POSITIONS 7-16. IF SPACES ARE SENT, THIS ERROR MESSAGE WILL RESULT.

0JA:	CERT OF MFR NOT FOUND

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE CM (CERT MFGR) NUMBER IS IN PROPER FORMAT BUT DOES NOT EXIST FOR THE CM PORT INDICATED.

VBU:	DT HS7: TIRE CODE/BRAND REQUIRED

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37, THEN THE TIRE MANUFACTURER ID CODE (DT01 RECORD, POSITIONS 38-40) AND THE TIRE MANUFACTURER BRAND NAME (DT01, POSITIONS 41-60) MUST BE SENT.

VID:	DT HS7: BLANK VIN POSITION: 2

THIS MESSAGE IS GENERATED WHEN AN ENTRY SUMMARY TRANSACTION IS USED TO REPORT DOT DATA VIA ABI. IF THE FILER USES THE DT03 TO REPORT VEHICLE IDENTIFICATION NUMBERS (VIN), THE FIRST TWO VINS BEING REPORTED MUST BE IN POSITIONS 5-21 AND 22-38 OF THE DT03 RECORD. IF THE SECOND VIN FIELD IS BLANK AND THE FILER USES POSITIONS 39-55 TO REPORT THE SECOND VIN, THIS ERROR MESSAGE WILL BE GENERATED.

ASH:	ENTRY WITHDRAWAL REQ. N/A

ENTRY WITHDRAWAL REQUEST NOT APPLICABLE.

DDC:	NAFTA/OTH RECONCILIATN NOT FILED

A DRAWBACK CLAIM CANNOT BE FILED AGAINST AN IMPORT ENTRY THAT HAS BEEN FLAGGED FOR RECONCILIATION UNTIL SUCH TIME AS THE RECONCILIATION SUMMARY HAS BEEN FILED AND PAID. AT THE TIME OF LIQUIDATION, THIS MESSAGE IS ALSO USED TO ALERT THE USER THAT THE TYPE '01', '02', OR '06' ENTRY IS FLAGGED FOR BOTH NAFTA AND OTHER RECONCILIATION, BUT THE RECONCILIATION HAS NOT YET BEEN FILED. THIS MESSAGE IS OVERRIDEABLE AT LIQUIDATION.

VAL:	FW 3-177: LICENSE NOT ON FILE

THE LICENSE NUMBER WHICH IS TRANSMITTED IN THE FW02 RECORD, POS 45-50 MUST BE RESIDENT IN THE FWL FILE. THE LICENSE NUMBER IS ISSUED BY FSW TO IMPORTERS IMPORT OVER $25,000 ANNUALLY OF MERCHANDISE THAT IS SUBJECT TO FWS. CUSTOMS DOES NOT TRACK CUMULATIVE VALUES. THIS IS THE RESPONSIBILITY OF FWS. FWS UP- LOADS THE U.S. LICENSE INFORMATION TO ACS ONCE A WEEK. IF A FILER HAS BEEN ASSIGNED A U.S. LICENSE NUMBER AND ATTEMPTS TO TRANSMIT IT PRIOR TO THE UPLOAD, THEY SHOULD BE REFERRED TO THE LOCAL FWS OFFICE FOR INSTRUCTIONS ON CLEARING MERCHANDISE UNTIL THE LICENSE IS RESIDENT IN OUR DATA BASE. THERE ARE NO EDITS TO REQUIRE THE USER TO TRANSMIT THE LICENSE NUMBER, BUT IF A LICENSE NUMBER IS TRANSMITTED, THERE MUST BE AN EXACT MATCH WITH ONE OF THE LICENSE NUMBERS IN THE FWL FILE.

VHQ:	DT HS7: MAKE REQUIRED

THIS ERROR MESSAGE OCCURS IN THE DOT INTERFACE. THE MAKE (NAME OF COMPANY THAT MANUFACTURED VEHICLE) SENT IN POSITIONS 5-19 OF THE DT02 RECORD IS MANDATORY IF BOXES 03, 05 OR

AQY:	LEAD NBR NOT A 514 PROTEST

THE NUMBER ENTERED IN THE LEAD PROTEST NUMBER FIELD IS A VALID NUMBER BUT BEEN ASSIGNED TO A CLAIM OR INTERVENTION, NOT A PROTEST BY USCS.

15D:	TARIFF NUMBER OUT OF SEQUENCE

THE REJECTED TARIFF NUMBER IS NOT IN THE PROPER SEQUENCE WHEN COMPARED TO THE OTHER TARIFF NUMBERS REPORTED FOR THIS LINE ON THE ENTRY. IF THE REJECTED LINE INVOLVES CHARPER 98 OR 99 TARIFF NUMBERS, THOSE NUMBERS ARE REPORTED BEFORE THE CHAPTER 1-97 NUMBERS. FOR WATCHES, THE TARIFF NUMBERS SHOULD ALWAYS BE REPORTED FOR THE MOVEMENT/ CASE/BATTERY/BAND IN THAT ORDER. IN MOST CASES, THE TARIFF NUMBERS WILL BE IN NUMBERICAL ORDER, BUT FOR TARIFF NUMBER 9102128010 (MOVEMENT/CASE), 9102128020 (BATTERY) AND 9102124000 (BAND), THE NUMBERS MUST BE REPORTED IN THE ORDER SHOWN HERE.

VBW:	DT HS7: WARN - TIRE BRAND MISSING

IF A FILER TRANSMITS A 'T' IN THE DOT DT01 RECORD, POSITION 37 AND THE TIRE MANUFACTURER ID CODE IN POSITIONS 38-40, THE TIRE MANUFACTURER BRAND NAME SHOULD BE SENT IN POSITIONS 41-60.

AET:	PIRP NUMBER MISSING OR INVALID

THIS MESSAGE IS GENERATED WHEN THE PIRP NUMBER IN THE EI 43 RECORD, POSITIONS 3-8 IS MISSING OR INVALID.

 Next 10 >>Showing results 1 to 25 of 1405