ABI Error Message

04Y:	INVALID IT/AWB/BL CODE

NOT 'P' 'I' 'M' 'H' OR 'S' TEMP CODE - SAME AS ERROR 04K - MAY BE REUSED

IN4:	NO EXISTING ENTRY FOUND

THIS MESSAGE OCCURS IN THE ABI 'IN' "SELECTIVITY RESULTS QUERY" TRANSACTION WHEN THE ENTRY NUMBER QUERIED IN THE R1 RECORD, POSITIONS 7-18, DOES NOT EXIST IN THE SELECTIVITY FILE.

VKT:	HLL: MAX 5 LOCATE FLDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED TO APPEAR ON A LOCATE DISPLAY. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

96U:	DATE IS WEEKEND DAY

THIS MESSAGE OCCURS IN THE ABI 'HP' (STATEMENT ADD/DELETE TRANSACTION WHEN A PAYMENT DUE DATE, SENT IN POSITIONS 19-24 OF THE 'H' RECORD IS A SATURDAY OR SUNDAY.

14D:	INCOMPATIBLE MOT/PORT OF UNLADING

THE MODE OF TRANSPORTATION IN REC 20, POS 28-29 (EI APPLICATION) IS NOT COMPATIBLE WITH THE MODE OF TRANSPORTATION IN THE DISTRICT-PORT FILE FOR THE PORT OF UNLADING IN REC 20, POS 30-33. THE ACCEPTABLE MODES OF TRANSPORTATION FOR A GIVEN PORT CODE CAN BE FOUND ON THE DISTRICT-PORT DATABASE. PORTS WHICH ACCEPT EITHER OCEAN OR AIR SHIPMENTS WILL HAVE A "B" IN THE "CARRIER TYPE" FIELD. "V" INDICATES A VESSEL PORT ONLY AND "A" INDICATES AN AIRPORT ONLY.

0FJ:	RECORD NOT ON FILE

THIS ERROR WILL OCCUR IF THE FILER TRIES TO PERFORM A DELETE OF A DRAWBACK CLAIM AND THE SYSTEM HAS NO RECORD OF THE CLAIM. BECAUSE THERE IS NO DATA IN THE SYSTEM, THERE IS NOTHING TO DELETE.

29J:	"Y" RECORD NOT EQUAL "B" RECORD

THIS MESSAGE INDICATES THAT THE PORT CODE OR FILER CODE FIELDS IN THE "Y" RECORD IS NOT IDENTICAL TO THE SAME FIELDS IN THE "B" RECORD. THE ERROR MSG NUMBER 29J DOES NOT USUALLY APPEAR WHEN THIS ERROR OCCURS.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

VNK:	INVALID IN-BOND FILER CODE

THIS ERROR MESSAGE OCCURS WHEN THERE IS AN INCORRECT "V" NUMBER IN-BOND FILER CODE TRANSMITTED IN THE FIRST THREE POSITIONS OF THE IN BOND NUMBER SENT IN THE EI 22 RECORD, POSITIONS 3-14 OR THE HI HA RECORD, POSITIONS 3-14. THE 'V' NUMBER MUST BE ON THE CARRIER FILE.

"1AS:

ENTRY NOT FOUND

CERTIFIED DATA MUST BE RESIDENT IN THE SSA FILE PRIOR TO THE TRANSMISSION OF THE CP APPLICATION. RESOLUTION IS TO CORRECT THE DATA, INCLUDING ANY REJECTED OGA ELEMENTS, AND RETRANSMIT EITHER THE EI, HI, OR HN DATA. IN THE FDA INTERFACE THIS ERROR WILL BE RETURNED IN CONJUNCTION WITH ERROR MESSAGE VHB. IT OCCURS WHEN FDA TRIES TO SEND A 'LP' UPDATE TRANSACTION (USUALLY A RELEASE) ON AN ENTRY THAT HAS BEEN ARCHIVED. ABI WILL NOT ALLOW IT AND SENDS BACK THIS MESSAGE, ALONG WITH VHB TO FDA. IT IS VIEWED ON THE 'LP' OUTPUT SCREEN.

APT:	HARDCOPY IND ALREADY = SENT

NOTIFICATION TO CUSTOMS THAT HARDCOPY MATERIALS HAVE BEEN SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT ANY TIME PRIOR TO DISPOSITION OF PROTEST OR CLAIM BY CUSTOMS. 'N' INDICATES THAT HARDCOPY MATERIALS DO NOT APPLY. ONCE SET TO 'S' THE HARDCOPY INDICATOR CANNOT BE UN-SET TO 'N'.

ST3:	LAST SET ON ENTRY IS INCOMPLETE

AN INCOMPLETE SET WAS CLOSED OUT IN THIS ENTRY FOR ABI REVIEW PURPOSES, THIS MESSAGE WILL USUALLY BE ACCOMPANIED BY ERROR MESSAGE ST1, PREVIOUS SET IS INCOMPLETE. ERROR MESSAGE ST3 INDICATES THAT THE LAST REPORTED SET DOES NOT HAVE AT LEAST TWO SUBSEQUENT 40 RECORDS WITH "V" INDICATORS SHOWN IN POS 80 OF THE 50 RECORD. THE FIRST 'V' LINE MUST REFLECT THE SAME HTS NUMBER AS IN THE 'X' AND AT LEAST ONE MORE 'V' LINE MUST BE PRESENT WITH A DIFFERENT HARMONIZED NUMBER.

27A:	CENSUS IMPROBABLE COUNTRY

THIS MESSAGE IS AN ABI REPLY TO AN ENTRY SUMMARY (EI) INPUT TRANSACTION. IT INDICATES THAT THE DATA COLLECTED BY CENSUS DOES NOT INDICATE THAT THE TARIFF NUMBER FOR THE LINE IN QUESTION HAS NOT BEEN PREVIOUSLY REPORTED FROM THE TRANSMITTED COUNTRY OF ORIGIN. THE FILER SHOULD VERIFY THE COUNTRY OF ORIGIN AND/OR TARIFF NUMBER AND, IF NECESSARY, MAKE CORRECTIONS. IF THE DATA IS ACCURATE AS TRANSMITTED, NO FURTHER ACTION VIA ABI IS NECESSARY.

OMP:	MANUFACTURER NUMBER REQUIRED

MANUFACTURER NUMBER IS REQUIRED FOR ENTRIES 01 02 03 06 07 11 12 21 31 32 34 38 51 52.

VPX:	CANADIAN DISCLAIMER INVALID

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE COMPLETE DESCRIPTION OF THIS DATA ELEMENT IS "NAFTA CTRY ENTRY LIST DISCLAIMER". IT IS SENT IN THE D30 MANDATORY RECORD, POSITION 68 AND IS A CODE WHICH INDICATES THAT THE NAFTA COUNTRY ENTRY DATA ASSOCIATED WITH THE CLAIM WILL OR WILL NOT BE PROVIDED. THE ONLY ALLOWED INDICATORS ARE 'SPACE FILL' WHICH INDICATES THAT THE INFORMATION WILL BE PROVIDED AND '1' WHICH INDICATES THAT THE INFORMATION WILL NOT BE PROVIDED. THE MOST COMMON ERROR IS SENDING A '0' FOR 'SPACE FILL'

EJA:	QUANTITY DISPATCHED REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C39 RECORD IS USED TO REPORT VARIATIONS FROM THE QUANTITIES REPORTED IN THE C33 RECORD. IF THE "QUANTITY DISPATCHED" BY THE INVOICING PARTY DIFFERS FROM THE QUANTITY REPORTED IN THE C33 RECORD, THAT DIFFERENCE IS REPORTED ON THIS RECORD. THE "QUANTITY DISPATCHED" FIELD IN POS 4-18 MUST CONTAIN A NUMBER GREATER THAN ZERO, OR THIS ERROR MESSAGE WILL BE GENERATED.

RBR:	RECON FLR/LOCATION NOT PERMITTED

IF POSITIONS 47-53 OF THE 'B' RECORD FOR THE 'RA' RECONCILIATION SUMMARY TRANSACTION ARE FILLED-IN, AN ACS RECORD MUST EXIST FOR THAT PREPARER FILER CODE AND PREPARER DDPP TO RELATE THEM TO THE 'B' RECORD PROCESSING DDPP. THIS MESSAGE WILL OCCUR IF NO DATA PRESENT IN POSITIONS 47-53 AND THE PROCESSING DDPP AND FILER CODE IN THE 'B' RECORD ARE VALID ON THE FILER PROFILE, BUT DO NOT AGREE WITH THE FILER AND DDPP OF THE SUMMARY IN THE 'R10' RECORD. IF POSITIONS 47-53 ARE FILLED, THERE IS A RECORD TO RELATE THE PREPARER DDPP AND FILER TO THE PROCESSING DDPP AND FILER, BUT THE PROCESSING DDPP AND FILER DO NOT AGREE WITH THE 'R10' DDPP AND FILER, THIS MESSAGE WILL OCCUR. THIS MESSAGE WILL USUALLY OCCUR IN COMBINATION WITH ERROR MESSAGE 'RBP'.

17B:	ERS-AB# CONTROL CARD SET ERROR

IN THE SUBMITTED ABI ERROR STATISTICS (ERS) REQUEST, THE (A THRU Z) CARD SET WAS INCORRECT. PROPER CONTENT FOR THE SET IS: A - CARD (STANDARD, ONE ONLY PER SET) B - CARD (STANDARD, ONE ONLY PER SET) #I - CARD (REQUEST, ONE ONLY PER SET) Y - CARD (STANDARD, ONE ONLY PER SET) Z - CARD (STANDARD, ONE ONLY PER SET)

15Q:	FEE CODE/TOTAL FEE DOES NOT MATCH

ABI ENTRY SUMMARY TRANSACTIONS REPORT VARIOUS USER FEES IN THE 62 RECORD OR THE 34 RECORD. THESE FEES ARE SUMMARIZED IN THE 89 RECORD BY CLASS CODE. THE AMOUNT OF THE LINE ITEM FEE TOTALS FROM THE 62 RECORDS (OR THE ENTRY LEVEL FEES FOUND IN THE 34 RECORD) MUST EXACTLY AGREE WITH THE AMOUNTS REPORTED IN THE 89 RECORD. DIFFERENCES OF ANY AMOUNT (ONE CENT OR MORE) BETWEEN THE AMOUNTS IN THE 34/62 RECORDS AND THE SAME CLASS CODE IN THE 89 RECORD WILL GENERATE THIS ERROR MESSAGE.

VK2:	HLS: OP TYPE MUST BE 'C' OR 'M'

THE OPERAND TYPE CODE MUST BE 'C' FOR CONSTANT OF 'M' FOR MAP. WHEN 'C' THE OPERAND MUST BE A DISPLAY CONSTANT IN SINGLE QUOTES OR A HEX CONSTANT IN THE FORM X ,....' WHEN 'M' THE OPERAND MUST BE A BMS MAP FIELD NAME.

VKE:	HLT:DBID REQUIRED

DBID IS REQUIRED TO CREATE A TABLE/LOCATE INQUIRY DEFINITION.

594:	INVALID DISTRICT /PORT OF UNLADING

THE PORT OF UNLADING (DIST/PORT CODE) MUST BE A VALID LOCATION AS SHOWN ON REGION/DISTRICT/PORT FILE (FOUR DIGIT DDPP). FILERS TRANSMIT THE PORT OF UNLADING FOR IMPORT SHIPMENTS IN THE ENTRY SUMMARY TRANSACTION (EI - 20 REC, POS 30-33) OR THE CARGO RELEASE TRANSACTION (HI - H1 REC, POS 65-68). IF THE PORT CODE TRANSMITTED DOES NOT EXIST ON THE DATABASE, THIS ERROR MESSAGE WILL RESULT. ***NOTE***- IN ADDITION TO THE ABOVE INFORMATION, A PORT THAT IS LISTED ON THE FILE MUST ALSO BE SET TO "Y" AS AN UNLADING PORT. IF THE PORT IS SET AS "N" FOR UNLADING PORT, THE ABOVE ERROR MESSAGE WILL BE GENERATED.

EJY:	UNIT OF MEASURE REQUIRED

IF THE FILER SENDS A QUANTITY IN THE SUMMARY INPUT (EI APPLICATION, REC 22, POS 51-58) AND DOES NOT ALSO INCLUDE A UNIT OF MEASURE (REC 22, POS 51-58) THIS ERROR MESSAGE WILL BE GENERATED. THE SAME LOGIC APPLIES TO THE CARGO RELEASE INPUT (HI APPLICATION, REC HA, POS 51-58 FOR THE UNIT OF MEASURE). IN THE AUTOMATED INVOICE TRANSACTION (APPLICATION CI), THIS ERROR MESSAGE IS SOMEWHAT MISLEADING. IF THE C34 RECORD IS TRANSMITTED, THE FIRST QUANTITY FIELD, POS 4-18, MUST BE GREATER THAN ZERO. THE FIRST UNIT OF MEASURE IN POS 19-21 IS OPTIONAL. IF THE SECOND UNIT OF MEASURE, POS 37-39, IS TRANSMITTED WITHOUT A SECOND QUANTITY IN POS 22-26, THIS ERROR MESSAGE IS GENERATED. A BETTER MESSAGE WOULD BE "UOM NOT ALLOWED WITH QUANTITY."

07A:	INVALID CROSS DIST PRCSSING PORT

THIS MESSAGE OCCURS IN AN 'HN' BORDER CARGO RELEASE TRANSACTION WHEN THE DISTRICT/PORT OF ENTRY SENT IN THE 01 RECORD, POSITIONS 4-7 IS DIFFERENT FROM THE PROCESSING DISTRICT/PORT SENT THE THE 'B' APPLICATION CONTROL RECORD, POSITIONS 4-7. THIS DESPITE THE WORDING IN THE DESCRIPTION BLOCK FOR THE DISTRICT/PORT OF ENTRY IN RECORD IDENTIFIER 01, PAGE BCR-4 OF THE CATAIR WHICH STATES "GENERALLY, THE DISTRICT CODE IS THE SAME AS THE DISTRICT CODE CONTAINED IN THE BLOCK CONTROL HEADER RECORD (RECORD IDENTIFIER B); HOWEVER, THE PORT CODE CAN BE DIFFERENT" THIS DOES NOT APPEAR TO BE TRUE. THE DDPP'S MUST BE THE SAME OR THIS REJECT OCCURS.

371:	IR TAX REQUIRED

IF TARIFF FLAG = '1', AN INTERNAL REVENUE TAX APPLIES AND MUST BE INPUT ON THE LINE ITEM ENTRY . IF THE TARIFF FILE INDICATES THAT THE TARIFF NUMBER IS SUBJECT TO IRS EXCISE TAXES, THIS MESSAGE WILL BE GENERATED IF NO TAX AMOUNT IS TRANSMITTED IN THE 60 RECORD, POS 59-68. NOTE THAT IN THOSE INSTANCES WHERE THE FILER IS AUTHORIZED TO PAY LESS TAX (OR INADVERTENTLY TRANSMITS INCORRECT TAX), THAN THE STATUTORY TAX RATE WOULD INDICATE, ERROR MESSAGE 42N - "WARNING - EST TAX < COMPUTED TAX" WILL RESULT.

 Next 10 >>Showing results 1 to 25 of 1405