ABI Error Message

ST1:	PREVIOUS SET IS INCOMPLETE

THE PROCESSING OF A SET WAS IN PROGRESS WHEN THIS LINE INTERRUPTED THE SET. IN ABI TERMS, THIS MEANS THAT AN "X" LINE WAS DETECTED ON A PREVIOUS LINE IN THE SUMMARY INPUT (APPLICATION EI), BUT NO "V" LINES OCCURRED PRIOR TO THE REPORTING OF THE LINE BEING REJECTED. FOR EXAMPLE, IF LINE 4 HAS AN "X", LINES 5 AND 6, AT A MINIMUM, MUST HAVE "V" INDICATORS. IF LINE 5 DOES NOT SHOW THE "V", IT WILL BE SHOWN IN THE OUTPUT TO THE FILER WITH THIS ERROR MESSAGE.

APW:	FAX INDICATOR INVALID

NOTIFICATION TO CUSTOMS THAT A FACSIMILE WAS SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT INITIAL FILING OF PROTEST, CLAIM OR INTERVENTION. 'N' INDICATES THAT NO FACSIMILE WAS SENT. THE VALUE SUBMITTED IN THE FAX INDICATOR IS NOT 'S' OR 'N'.

4DK:	NO MATCHING LINE ITEM FOUND

THIS MESSAGE WILL BE PRESENTED WHEN THE ENTRY INFORMATION AS GIVEN TO HEADQUARTERS QUOTA TO CORRECT A RECORD IS INCORRECT. THUS THE COMPUTER CANNOT LOCATE THE LINE TO BE CORRECTED. IN THE FDA INTERFACE, THIS ERROR MESSAGE IS GENERATED WHEN THE FILER ATTEMPTS TO SEND A FDA LINE NUMBER IN A 'CP' APPLICATION (OTHER GOVERNMENT AGENCY CORECTION) THAT DOES NOT EXIST IN THE SELECTIVITY RECORD. THIS DOES NOT MEAN THAT THE LINES DO NOT MATCH, RATHER THE FILER IS SENDING MORE LINES THAN EXIST IN THE SELECTIVITY LINE ITEM RECORD.

ASN:	ARGUMENT/JUSTIFICATION N/A

ADDITIONAL NARRATIVE IS NOT ACCEPTED WHEN A SERVICE REQUEST IS FILED REQUEST REVIEW OF DENIAL OF AN APPLICATION FOR FURTHER REVIEW. THAT REVIEW WILL BE BASED SOLELY ON THE INFORMATION BEFORE THE CUSTOMS SERVICE AT THE TIME THE APPLICATION FOR FURTHER REVIEW WAS DENIED.

07S:	I.T.//NON I.T. CONFLICT

THIS MESSAGE RESULTS FROM A CARGO RELEASE INPUT TRANSACTION (APPLICATION HI). IF MULTIPLE BILLS OF LADING OR AIR WAYBILLS ARE REPORTED, ALL MUST BE EITHER RELATED TO AN INBOND NUMBER OR NONE CAN BE. IF THE FILER REPORTS ONE BILL WITH AN ASSOCIATED INBOND NUMBER AND DOES NOT INCLUDE INBOND DATA FOR ANY OTHER BILLS REPORTED, THIS MESSAGE WILL RESULT.

VP7:	DIST IN D01 REC NOT = B REC

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE DISTRICT/PORT OF CLAIM IS SENT IN THE D01 RECORD, POSITIONS 7-10. IT MUST MATCH THE PROCESSING DISTRICT/PORT CODE IN THE 'B' RECORD, POSITIONS 4-7.

ST3:	LAST SET ON ENTRY IS INCOMPLETE

AN INCOMPLETE SET WAS CLOSED OUT IN THIS ENTRY FOR ABI REVIEW PURPOSES, THIS MESSAGE WILL USUALLY BE ACCOMPANIED BY ERROR MESSAGE ST1, PREVIOUS SET IS INCOMPLETE. ERROR MESSAGE ST3 INDICATES THAT THE LAST REPORTED SET DOES NOT HAVE AT LEAST TWO SUBSEQUENT 40 RECORDS WITH "V" INDICATORS SHOWN IN POS 80 OF THE 50 RECORD. THE FIRST 'V' LINE MUST REFLECT THE SAME HTS NUMBER AS IN THE 'X' AND AT LEAST ONE MORE 'V' LINE MUST BE PRESENT WITH A DIFFERENT HARMONIZED NUMBER.

27G:	*CENSUS* IMPROBABLE AIR TARIFF 1

THIS MESSAGE IS ONE OF A NUMBER OF CENSUS WARNING MESSAGES. IN THIS CASE, THE MESSAGE INDICATES THAT THE TARIFF NUMBER (50 REC, POS 4-13) IS ONE THAT IS NOT USUALLY TRANSPORTED TO THE UNITED STATES BY AIR CARRIER. HEAVY MACHINERY, (EARTH MOVING EQUIPMENT), PETROLEUM PRODUCTS, ETC. ARE SOME EXAMPLES OF COMMODITIES WHOSE TARIFF NUMBER WILL GENERATE THIS WARNING MESSAGE.

B14:	PROVINCE CODE REQUIRED

1.IF THE COUNTRY OF ORIGIN (REC 40, POS 6-7) AND THE COUNTRY OF EXPORT (REC 50, POS 69-70) IS CANADA, THE CANADIAN PROVINCE CODE MUST BE USED AS THE ISO CODE FOR THE COUNTRY OF ORIGIN. 2. IF THE COUNTRY OF ORIGIN (REC 40, POS 6-7) IS EITHER CA OR THE CANADIAN PROVINCE CODE, THE ISO CODE OF THE MANUFACTURER ID (REC 60, POS 43-44) MUST BE THE CANADIAN PROVINCE CODE.

AR4:	REFUND PARTY DATA INCOMPLETE

EITHER THE ID NUMBER OR THE PARTY TYPE INDICATOR IS MISSING, OR A BLANK RECORD WAS RECEIVED.

AET:	PIRP NUMBER MISSING OR INVALID

THIS MESSAGE IS GENERATED WHEN THE PIRP NUMBER IN THE EI 43 RECORD, POSITIONS 3-8 IS MISSING OR INVALID.

VBR:	OGA DATA IGNORED

THIS MESSAGE IS NOT AN ERROR MESSAGE BUT RATHER AN INFORMATIONAL WARNING MESSAGE. IT OCCURS WHEN A FILER ATTEMPTS TO CERTIFY A SUMMARY WHICH HAS OGA INFORMATION WHEN CARGO SELECTIVITY HAS ALREADY BEEN PROCESSED PREVIOUSLY. IF THE FILER IS RECERTIFYING INADVERTENTLY, THE WARNING MESSAGE MAY BE IGNORED. IF THE FILER IS CHANGING SUMMARY DATA THAT AFFECTS PREVIOUSLY REPORTED FDA DATA, THE FILER SHOULD CONTACT THE APPROPRIATE CUSTOMS OFFICE TO REQUEST A DELETE OF SELECTIVITY. THE APPROPRIATE CUSTOMS OFFICE WILL APPROVE OR DENY THE REQUEST. IF APPROVED, THE FILER SHOULD RETRANSMIT THE SUMMARY AND CERTIFY FOR CARGO.

8WZ:	INVALID SUB-HOUSE BL/AWB NUMBER

THIS MESSAGE IS GENERATED IN RESPONSE TO A BILL OF LADING UPDATE TRANSACTION (APPLICATION LN). THE SUB-HOUSE BILL NUMBER IS TRANSMTTED IN THE L3 REC, POS 52-63. IF THE NUMBER REPORTED IN THIS FIELD IS FEWER THAN 12 CHARACTERS LONG, THE NUMBER SHOULD BE LEFT JUSTIFIED. IF ANY LEADING SPACES ARE INCLUDED IN THE HOUSE BILL NUMBER, THIS ERROR MESSAGE WILL BE GENERATED.

AER:	ERROR IN A 32 REC; RLSE 5

THIS MESSAGE FOLLOWS A MORE SPECIFIC ERROR MESSAGE (I.E. "1F5 RELEASE NOT ON FILE") IN A CONSOLIDATED ENTRY SUMMARY TRANSACTION. IT NOTIFIES THE FILER THAT THE ERROR IS IN THE FIFTH RELEASE IN THE 32 RECORD.

ARD:	SURETY CERTIFICATION N/A

EITHER THE PROTESTANT IS NOT A SURETY, THE INDICATOR TRANSMITTED WAS A LETTER OR CHARACTER OTHER THAN "Y", OR THE SURETY CERTIFICATION WAS INCORRECTLY USED AS PART OF AN AMENDMENT, ADDENDA, OR SERVICE REQUEST TRANSMISSION.

070:	INVALID OBJECT CLASS

1 TO 3 DIGIT CODE IS NOT FOUND WHEN VALIDATED AGAINST THE CAMIS OBJECT CLASS CODE FILE. OBJECT CLASS CODE IS NOT NUMERIC. EXCEPTION: MAY BE NON-NUMERIC FOR CLASS CODES 060,061,062,063,069 OR 071. LEFT-JUSTIFIED ZEROS ARE NOT REQUIRED INPUT.

4BL:	ENTRY WAS NOT ORIGINALLY ABI

ALTHOUGH THE DISKETTE PROGRAM IS NOT ABI AND THE CLAIMS ARE NOT ABI, WE USE SIMILIAR PROGRAMMING AS THE SOURCE OF CLAIM CREATION. IF THE CLAIM HAS BEEN COMPLETELY INPUT MANUALLY AND RECORDS EXIST AT THE TIME THE ABI OR DISKETTE JOBS ARE RUN, THE DISKETTE AND ABI WILL NOT PERMIT THE OVERLAY OF DATA.

SG2:	INVALID CANADA SUGAR CERT FORMAT`

A CORRECT CERTIFICATE MUST BE 7 ALPHA-NUMERIC CHARACTERS WITH NO SPECIAL CHARACTERS. EITHER THE GIVEN DATA CONTAINS SPECIAL CHARACTERS OR IS NOT A TOTAL OF 7 CHARACTERS IN LENGTH.

96U:	DATE IS WEEKEND DAY

THIS MESSAGE OCCURS IN THE ABI 'HP' (STATEMENT ADD/DELETE TRANSACTION WHEN A PAYMENT DUE DATE, SENT IN POSITIONS 19-24 OF THE 'H' RECORD IS A SATURDAY OR SUNDAY.

B12:	ISO COUNTRY CODE NOT FOUND

THIS ERROR MESSAGE OCCURS IN THE $I (ADD MANUFACTURER) TRANSACTION WHEN THE FILER SENDS AN ISO CODE OF THE COUNTRY OF THE MANUFACTURER THAT DOES NOT EXIST IN THE COUNTRY CODE FILE.

RB6:	R21, R89 FEE CLASSES INCONSISTENT

ESSENTIALLY THE REVERSE OF MESSAGE 'RB5', THIS MEANS THAT ON THE 'RA' RECON SUMMARY TRANSACTION, THERE IS AT LEAST ONE 'R21' RECORD WITH A FEE CLASS CODE THAT DOES NOT EXIST ON ANY 'R89' RECORD.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

4JD:	TARIFF 1 / TARIFF 2 DISCREPANCY

A SECOND TARIFF NUMBER WITHIN CHAPTERS '50' THRU '63' WAS ENTERED WITH A PRIMARY TARIFF NUMBER OF 9802005010 OR 9802008040. SEE US NOTE 2B WHICH EXCLUDES TESTILE ARTICLES. SINCE THE ABOVE WAS WRITTEN CHANGE REQUESTS ADDED THE FOLLOWING EDITS TO 9802008040: A HTS NUMBER WITH A TEXTILE CATEGORY NUMBER MAY NOT BE USED AS THE ADDITIONAL TARIFF NUMBER UNLESS IT IS CHAPTER 64.

ADW:	MOT MISMATCH ON CONSL RELEASE

THE MOT'S (MODE OF TRANSPORTATION) MUST BE THE SAME FOR ALL OF THE RELEASES ON A CONSOLIDATED ENTRY.

VLS:	DRAWBACK INSPECTION IND INVALID

THIS ERROR MESSAGE MEANS THAT THE FILER HAS USED A CODE OF OTHER THAN 'Y' ("YES") OR 'N' ("NO") FOR WHETHER THIS IS AN INSPECTION CLAIM. THE FILER MUST USE EITHER 'Y' OR 'N' VIA DISKETTE OR SPACE ("NO") OR '1' ("YES") FOR ABI.

 Next 10 >>Showing results 1 to 25 of 1405