ABI Error Message

DK3:	D20 RECORD MUST CONTAIN DATA

THIS ERROR MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. WHEN THE DATA SENT VIA ABI, NO DATA WAS PRESENT IN THE 'D25' RECORD.

20T:	ADDRESS REQUIRED

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C10 AND C60 RECORDS PROVIDE SPACE TO REPORT THE SECOND LINE OF THE ADDRESS FOR THE PARTY IDENTIFIED IN THE C08 OR C58 RECORD (IF THERE IS MORE ADDRESS INFORMATION THAN CAN BE REPORTED ON THE C09 RECORD). IF THE C10 OR C60 RECORD IS TRANSMITTED WITH BLANKS IN THE SECOND-LINE-OF-ADDRESS FIELD, THIS ERROR MESSAGE WILL BE GENERATED.

VLZ:	DRAWBACK CLAIM DATE INVALID

IN THE DRAWBACK MODULE THIS MESSAGE MEANS THAT THE DATE IS NOT IN A VALID YYMMDD FORMAT ON THE DISKETTE.

590:	TOTAL EST. AD DUTY EXCEEDS LIMIT

TOTAL ESTIMATED ANTI-DUMPING DUTY EXCEEDS THE LIMIT.

VOM:	INVALID REMOTE ENTRY DDPP

THE DDPP SENT IN THE 'REMOTE DDPP' PORTION OF THE 'B' RECORD, POSITIONS 47-50 MUST BE A VALID DDPP IN THE DISTRICT/PORT FILE.

AFH:	ADD BOND AMT/TYPE INVALID; 35 REC

THE ADD BOND TYPE IN REC 35, POS 14 MUST BE 0 OR 1. THE USE OF ANY OTHER NUMERIC, SPACE OR SPECIAL CHARACTER WILL RESULT IN THIS ERROR MESSAGE. IF THE BONDED ANTIDUMPING DUTY AMOUNT (35 REC, POS 3-13) DOES NOT AGREE WITH THE ANTIDUMPING DUTY AMOUNT IN THE 60 REC, POS 33-42, THIS ERROR MESSAGE WILL BE GENERATED. IF BOTH AMOUNTS AGREE, BUT DO NOT EQUAL THE CALCULATED ANTIDUMPING DUTY AMOUNT, AS DETERMINED BY ACS, ERROR MESSAGE AAZ "ADD/CVD DUTY COMP MISMATCH" WILL RESULT. NOTE-- IF THE CASE BEING REPORTED HAS A DUTY RATE OF 0.00 PERCENT AND A BOND/ CASH INDICATOR OF "B", ABI WILL NOT ACCEPT THE BONDED INDICATOR IN THE 35 REC. THE FILER SHOULD TRANSMIT EITHER A BLANK IN POS 14 OR A ZERO.

8VP:	MULTIPLE TRANS FOR SAME BILL NBR

THIS MESSAGE OCCURS IN THE BILL OF LADING UPDATE (LN) FUNCTION. MULTIPLE L3 RECORDS CAN BE SENT BUT THE BILL OF LADING INFORMATION CANNOT BE IDENTICAL OR THIS MESSAGE WILL RESULT. THE BILL OF LADING INFORMATION MUST BE DIFFERENTIATED BY USE OF DIFFERENT MASTER BILL NUMBERS OR, THE MASTER BILLS CAN BE THE SAME IF THE HOUSE BILLS ARE DIFFERENT (AIRWAY BILLS AND HOUSE AIRWAY BILLS IN THE AIR AMS ENVIRONMENT).

VGG:	FD 701: FDA MFR NOT ON FILE

THIS ERROR MESSAGE IS A REJECTION IN THE FDA INTERFACE. THE MANUFACTURER IDENTIFICATION NUMBER (MID, REC FD01, POS 48-62, MUST BE ON FILE BEFORE THE FDA ENTRY WILL PROCESS. THE FILER MUST ADD THE MANUFACTURER TO THE DATABASE VIA ABI AND RESEND THE ENTRY.

1GL:	MAIL FEE REQUIRED

FOR DUTIABLE MAIL ENTRIES (MOT 50), A 34 RECORD WITH CLASS CODE 496 AND AN AMOUNT OF $5.00 MUST BE TRANSMITTED ON THE SUMMARY INPUT. IF THE 34 RECORD IS OMITTED, THIS ERROR MESSAGE WILL RESULT.

8XU:	ENTRY MUST BE IN CUSTOMS STATUS

THIS MESSAGE APPLIES, AT A MINIMUM, TO THE TIB EXTENSION PROCEDURES (APPLICATION XN). IF A FILER ATTEMPTS TO EXTEND A TIB ENTRY, THAT ENTRY MUST FIRST BE IN CUSTOMS-ACCEPTED STATUS. IF THE ENTRY NUMBER IS ONLY IN 'ABI' STATUS, THIS MESSAGE WILL BE GENERATED IN RESPONSE TO THE FILER'S XN INPUT.

VIK:	FD 701: CMPLNCE QUAL W/O AFFRM CD

THIS ERROR MESSAGE IS SEEN IN THE FDA INTERFACE. SOME FDA PRODUCT CODES MAY REQUIRE WHAT IS KNOWN AS AN FDA AFFIRMATION OF COMPLIANCE. THERE IS NO EDIT LINKING THE AFFIRMATION OF COMPLIANCE WITH THE PRODUCT CODE. THE FILER, THROUGH PAST KNOWLEDGE OF THE SHIPMENT OR FROM INQURIES WITH FDA, KNOW WHICH PRODUCTS REQUIRE AFFIRMATIONS. AFFIRMATIONS ARE A THREE CHARACTER CODE WHICH IS MEANINGFUL TO FDA. SOME OF THESE AFFIRMATIONS REQUIRE "QUALIFIERS" WHICH MAY BE FORMS, LICENSES OR DECLARATIONS. IN THE FDC FILE THESE ARE CODED WITH "Y" FOR "YES, REQUIRED". THIS ERROR IS GENERATED WHEN THE FILER SENDS THE AFFIRMATION QUALIFIER BUT NOT THE AFFIRMATION CODE ITSELF. THE AFFIRMATION OF COMPLIANCE IS SENT IN REC FD01, POS 20-22. THE AFFIRMATION OF COMPLIANCE QUALIFIER IS SENT IN REC FD01, POS 23-47. SEE CATAIR, PAGE OGA-28.

VHI:	DT HS7: DOT BOND CODE REQUIRED

IF BOX 03 IS USED (REC DT01, POS 8-9), THE ENTRY MUST BE BONDED FOR DOT. A BOND SURETY CODE MUST BE TRANSMITTED IN THE DT01 RECORD, POS 32-34. NO OTHER BOX NUMBER PERMITS THE USE OF THE BOND CODE.

RB5:	R89, R21 FEE CLASSES INCONSISTENT

THIS MESSAGE MEANS THAT AT LEAST ONE OF THE FEE CLASS CODES GIVEN IN THE 'R89' RECORD(S) OF THE 'RA' RECON TRANSACTION DOES NOT EXIST ON ANY OF THE GIVEN 'R21' RECORDS VIA ABI.

ADQ:	VALID RELEASE ENTRIES REQ'D

THIS MESSAGE OCCURS IN CONSOLIDATED ENTRY SUMMARY TRANSACTIONS. THE RELEASE ENTRY NUMBERS SENT IN THE 32 RECORD OF THE EI TRANSMISSION MUST BE VALID NUMBERS IN THE SELECTIVITY FILE.

VP7:	DIST IN D01 REC NOT = B REC

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE DISTRICT/PORT OF CLAIM IS SENT IN THE D01 RECORD, POSITIONS 7-10. IT MUST MATCH THE PROCESSING DISTRICT/PORT CODE IN THE 'B' RECORD, POSITIONS 4-7.

VHH:	DT HS7: INVALID ISO CODE

IF THE FILER TRANSMITS DOT INFORMATION FOR BOX 05, 06, OR 12, THE ISO CODE OF THE COUNTRY OF ORIGIN IS REQUIRED. IF A CODE NOT FOUND ON THE COUNTRY CODE FILE IS TRANSMITTED IN POSITIONS 30-31 OF THE DT01 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

VHJ:	DT HS7: BOND (SURETY) NOT ON FILE

IF BOX 03 IS USED (REC. DT01, POS 8-9,) THE DOT BOND MUST BE REPRESENTED BY A VALID SURETY CODE FROM THE SURETY DATA FILE. ABI DOES NOT EDIT THE SURETY CODE IN THIS FIELD TO SEE IF IT MATCHES THE SURETY CODE IN THE 10 RECORD OF THE SUMMARY INPUT.

EJO:	LOCATION CODE NOT ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). LOCATION DATA (IN CODED FORMAT) IS TRANSMITTED IN THE C13 (OR C43) RECORD. IF THE LOCATION CODE INDICATOR IS "25", THE CODED LOCATION IN POS 11-15 MUST BE A VALID CODE FROM THE CENSUS SCHEDULE K. IF THE INDICATOR IS "26", THE CODED LOCATION MUST BE A VALID CODE FROM CENSUS SCHEDULE D. IF THE INDICATOR IS "66", THE LOCATION CODE MUST BE A VALID ISO COUNTRY CODE .

VKO:	HLT: INQUIRY DISPLAY MUST BE Y/N

THE INQUIRY DISPLAY SWITCH MUST BE Y=YES N=NO.

ST1:	PREVIOUS SET IS INCOMPLETE

THE PROCESSING OF A SET WAS IN PROGRESS WHEN THIS LINE INTERRUPTED THE SET. IN ABI TERMS, THIS MEANS THAT AN "X" LINE WAS DETECTED ON A PREVIOUS LINE IN THE SUMMARY INPUT (APPLICATION EI), BUT NO "V" LINES OCCURRED PRIOR TO THE REPORTING OF THE LINE BEING REJECTED. FOR EXAMPLE, IF LINE 4 HAS AN "X", LINES 5 AND 6, AT A MINIMUM, MUST HAVE "V" INDICATORS. IF LINE 5 DOES NOT SHOW THE "V", IT WILL BE SHOWN IN THE OUTPUT TO THE FILER WITH THIS ERROR MESSAGE.

VKQ:	HLS: MAX 15 DEF SEL FLDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED TO FORMULATE DEFAULT SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

AQR:	BASE DATE QUALIFIER N/A

WHEN A FILING/AMENDMENT PERIOD BASE DATE IS SUBMITTED, FILER MUST DECLARE THE LIFECYCLE EVENT ASSOCIATED TO THE DATE. NO FILING/AMENDMENT PERIOD BASE DATE HAS BEEN SUBMITTED, OR IT HAS BEEN SUBMITTED IN ERROR.

EIE:	INVALID TYP SHIPPING/PACKING UNIT

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C05 REC, POS 19-23, PROVIDES SPACE TO REPORT A SHIPPING UNIT TYPE. VALID SHIPPING UNIT TYPES ARE LISTED IN APPENDIX B TO THE CATAIR, PAGES B-22 TO B-23. IF THE SHIPPING UNIT TYPE CODE TRANSMITTED IN THE C05 RECORD DOES NOT MATCH ONE OF THE SHIPPING UNIT TYPE CODES LISTED IN APPENDIX B, THIS ERROR MESSAGE WILL BE GENERATED.

VBA:	BRANCH CODE INVALID W/O STMT IND

REMOVE BRANCH CODE FOR 20REC WHEN PAYMENT INDICATOR IS NOT EQUAL TO 2, 3 OR 5 IN ADDITION, A VALID PAY DATE MUST BE TRANSMITTED IN THE 30 REC, POS 54-59, WHENEVER A PAYMENT TYPE INDICATOR IS TRANSMITTED IN POS 53. IF THE PAYMENT TYPE INDICATOR IS PRESENT, BUT THE PAYMENT DUE DATE IS BLANK OR ZEROES, AND A BRANCH CODE IS TRANSMITTED IN THE 20 REC, THIS ERROR MESSAGE WILL RESULT.

ADN:	PROCESSED RLSE ALREADY ON FILE

IN A CONSOLIDATED ENTRY SUMMARY (RECORD 30, POSITION 39, "C" INDICATED), THE ENTRY NUMBER(S) LISTED IN RECORD 32, POSITIONS 13-23, 24-34, 35-45, ETC., MAY NOT HAVE AN EXISTING ENTRY SUMMARY ALREADY ON FILE.

 Next 10 >>Showing results 1 to 25 of 1405