ABI Error Message

VLX:	DRAWBACK CM/CD CODE INVALID

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE FILER USED AN INDICATOR OF OTHER THAN 'E' (DIRECT DESIGNATION), 'D' (DESIGNATION FROM A CD) OR 'M' (DESIGNATION FROM A CM) WHERE THEY ARE GIVING IMPORT ENTRY DATA BECAUSE IT IS AVAILABLE.

ACX:	IMP TYPE REQUIRED FOR US ADDRESS

THIS MESSAGE IS USUALLY GENERATED IN RESPONSE TO AN ABI 5106 UPDATE TRANSACTION (APPLICATION TI). FOR IDENTIFICATION NUMBERS BEING ADDED TO ABI, IF THE ADDRESS IS IN THE UNITED STATES, THE IMPORTER MUST HAVE ONE OF FOUR IDENTIFICATION TYPES INCLUDED IN THE T1 REC, POS 80.THEVALID TYPES ARE: "C" (CORPORATION), "P" (PARTNERSHIP), "I" (INDIVIDUAL), OR "S" (SOLE PROPRIETOR).  ANY OTHER INDICATOR, INCLUDING A BLANK SPACE, WILL GENERATE THIS MESSAGE. NOTE: AS OF MAY 1998, THIS ERROR MESSAGE IS GENERATED WITHOUT THE ACCOMPANYING ERROR CODE "ACX".

VHB:	ISIS INPUT BYPASSED/ ERRORS FOLLOW

THIS MESSAGE IS ISSUED IN CONJUNCTION WITH ERROR MESSAGE 1AS. IT MEANS THAT ABI REJECTED FDA'S ATTEMPT TO UPDATE (USUALLY A RELEASE) AN ENTRY THAT HAS GONE INTO ARCHIVE STATUS.

VKJ:	HLT:DEFAULT CRITERIA MUST BY Y/N

THE DEFAULT SELECT CRITERIA SWITCH IS REQUIRED AND MUST BE Y=YES OR N=NO.

VNU:	INVALID ACS IMPORT ENTRY TYPE

THIS DRAWBACK MODULE ERROR MESSAGE MEANS THAT THE ENTRY TYPE FOR THE DESIGNATED IMPORT IS NOT VALID FOR USE ON A DRAWBACK TRANSACTION. THE VALID ENTRY IMPORT ENTRY TYPES ARE '01', '02', '03', '04', '06', '07', '08', '11', '12', '21', '22', '51', '52', AND '53'. IF THE IMPORT HAS ANY OTHER ENTRY TYPE, THIS REJECTION WILL OCCUR BECAUSE THE IMPORT IS NOT A CONSUMPTION OR WAREHOUSE WITHDRAWAL ENTRY. FOR RECONCILIATION, THIS ERROR MEANS THAT THE IMPORT ENTRY WAS NOT A TYPE '01', '02' OR '06'. THESE ARE THE ONLY VALID ENTRY TYPES FOR RECONCILIATION.

ASD:	SEQUENCE NUMBER ERROR

SEQUENCE NUMBER ERROR. ENTRIES AND LINES OF NARRATIVE MUST BE LISTED IN ASCENDING ORDER FROM 0001 TO 9999. THIS MESSAGE MAY BE RETURNED IF AN ENTRY OR LINE OF NARRATIVE WAS ASSIGNED A NUMBER OUT OF SEQUENCE.

VKQ:	HLS: MAX 15 DEF SEL FLDS EXCEEDED

A MAXIMUM OF FIFTEEN FIELDS MAY BE SELECTED TO FORMULATE DEFAULT SELECTION CRITERIA FOR A TABLE LOCATE DEFINITION. THE FIELD(S) IN ERROR EXCEED THIS LIMIT.

ACR:	REFERENCE NUMBER INACTIVE

THIS MESSAGE REFERS TO THE IRS/SS/CUSTOMS ASSIGNED NUMBERS USED ON A DRAWBACK CLAIM, SPECIFICALLY THE AGENT/BROKER (4811) ID. THE NUMBER USED IS NOT ON THE ACTIVE IMPORTER MASTER FILE .

EIU:	INVALID ALLOWANCE/CHARGE IND

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSIN (APPLICATION CI). THE C17 OR C51 RECORD PROVIDES FOR ONE OF SIX VALID ALLOWANCE/CHARGE INDICATORS. IF ANY OTHER CHARACTER, INCLUDING A BLANK FIELD, IS TRANSMITTED IN THIS ELEMENT, THIS ERROR MESSAGE WILL BE GENERATED.

RBX:	RECON SITE NOT AUTH FOR IMPORTER

THE DDPP OF THE RECONCILIATION SUMMARY IN THE 'R10' RECORD IS NOT ONE OF THE AUTHORIZED RECONCILIATION FILING LOCATIONS INDICATED IN THE 'RCI' RECORD FOR THE GIVEN IMPORTER.

04C:	UNLADING DIST/PORT NOT NUMERIC

PORT OF UNLADING MUST BE NUMERIC

APX:	FAX INDICATOR CANNOT CHANGE

NOTIFICATION TO CUSTOMS THAT A FACSIMILE WAS SENT, INDICATED BY 'S', MAY BE SUBMITTED BY FILER AT INITIAL FILING OF PROTEST, CLAIM OR INTERVENTION. 'N' INDICATES THAT NO FACSIMILE WAS SENT. NO VALUE SUBMITTED IN THE FAX INDICATOR WILL BE ACCEPTED AFTER INITIAL FILING.

95E:	ENTRY NOT ELIGIBLE FOR RECONCILE

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ENTRY SUMMARY INPUT TRANSACTION (APPLICATION EI). ONLY THREE ENTRY TYPES ARE ELIGIBLE FOR THE RECONCILIATION PROTOTYPE AS OF OCT 1998. THE THREE TYPES ARE "01", "02", AND "06". IF ANY OTHER ENTRY TYPE IS TRANSMITTED IN THE 10 REC, POS 71-72, THIS ERROR MESSAGE WILL RESULT.

"J03:

MASTER BILL NOT COMPLETE

THIS MESSAGE APPEARS TO RELATE TO THE BILL OF LADING UPDATE TRANSACTION (APPLICATION LN) WHEN AN AIR SHIPMENT IS BEING CORRECTED. THE L3 RECORD, POS 20-31, PROVIDES FOR THE AIR WAYBILL DATA. IF THIS FIELD IS COMPLETED PROPERLY WITH A VALID AIR WAYBILL OF 11 DIGITS (WITH NO INCLUDED SPACES, DASHES OR OTHER CHARACTERS) THE 12 POSITION OF THE FIELD MUST BE A SPACE. IF THE FIELD ACTUALLY CONTAINS ONLY 11 CHARACTERS, THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE WILL ALSO BE GENERATED IN THE HI APPLICATION IF THE AIR WAYBILL NUMBER DOES NOT CONTAIN 11 CHARACTERS. AFTER SEPTEMBER 1998 (TIN MAN REVISION) ENTRIES FOR ALL MODES OF TRANSPORTATION THAT INVOLVE INBOND NUMBERS WILL REJECT IF THE MASTER BILL FIELD IS NOT COMPLETED. (SEE ADMIN MSG 98-0640)

VG1:	REQUEST SENT TO FDA, PROC PENDING

THIS IS NOT AN ERROR MESSAGE BUT AN INFORMATIONAL MESSAGE. IT OCCURS WHEN A FILER HAS SENT A REQUEST FOR AN FDA ESTABLISHMENT IDENTIFIED (FEI) NUMBER THROUGH ACS TO FDA. THIS INTERIM MESSAGE IS TELLING THE FILER THAT THEIR REQUEST PASSED ABI EDITS AND HAS BEEN SENT TO THE FDA SYSTEM. FDA WILL PROCESS THE REQUEST AND SEND BACK THE FEI NUMBER IN A SEPARATE ABI TRANSACTION.

VGI:	FD 701: FDA SHPPR NOT ON FILE

THIS ERROR MESSAGE IS A REJECTION IN THE FDA INTERFACE. THE FDA SHIPPER IDENTIFICATION NUMBER (MID, REC FD01, POS 63-77) MUST BE ON FILE FOR THE SHIPPER BEFORE THE FDA ENTRY WILL PROCESS. THE FILER MUST ADD THE SHIPPER IDENTIFICATION NUMBER TO THE DATABASE VIA ABI AND RESEND THE ENTRY.

IN3:	ENT IS ARCHVD RESULTS NOT ON FILE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO SELECTIVITY RESULTS QUERY INPUT (APPLICATION IN). IF THE ENTRY NUMBER IN THE R1 RECORD IS OLD ENOUGH TO BE LISTED ON THE ARCHIVED SELECTIVITY RECORDS, THERE WILL BE NO ACTIVE OR CURRENT SELECTIVITY DATA TO DISPLAY. THIS MESSAGE WILL BE GENERATED AS A RESULT.

RB2:	INVALID INCREASE-REFUND IND

THE INCREASE/REFUND INDICATOR IN THE ABI 'RA' RECON TRANSACTION 'R10' RECORD MUST = '1', '2', OR '3'.

Q41:	STMT PAID, TO DELETE, NEGATE COLL

THIS MESSAGE OCCURS WHEN AN ABI FILER ATTEMPTS TO REMOVE AN ENTRY FROM STATEMENT (APPLICATION HP) AND THE STATEMENT HAS ALREADY HAD AN ACH AUTHORIZATION TRANSMITTED TO ABI (APPLICATION QN). THE SOLUTION IS FOR THE FILER TO CONTACT A CLIENT  REP WHO CAN PERFORM THE PAYMENT AUTHORIZATION DELETE FUNCTION, IF THE PAYMENT AUTHORIZATION WAS TRANSMITTED ON THE SAME DAY AS THE REQUEST IS MADE.

484:	ULTIMATE CONSIGNEE NOT ON FILE

THE CONSIGNEE NUMBER, TRANSMITTED IN THE SUMMARY INPUT IN REC 10, POS 20-31, MUST BE LISTED ON THE IMPORTER DATABASE. IF THE CARGO RELEASE APPLICATION (HI) IS USED, THE CONSIGNEE NUMBER TRANSMITTED IN THE H2 REC, POS 11-22, MUST BE LISTED ON THE IMPORTER DATABASE. IF THE CONSIGNEE NUMBER IS NOT ON FILE, THIS WARNING MESSAGE WILL RESULT (THIS IS NOT A REJECTION MSG). OTHER APPLICATIONS THAT WILL RECEIVE THIS ERROR MESSAGE INCLUDE THE AUTOMATED INVOICE INTERFACE (CI). THIS MESSAGE CAN BE A REJECT IF THE ENTRY INVOLVES FDA REGULATED MERCHANDISE BEING SENT THROUGH THE FDA INTERFACE. THE ULTIMATE CONSIGNEE MUST BE ON FILE BEFORE SELECTIVITY RUNS BECAUSE FDA REQUIRES AN ULTIMATE CONSIGNEE. FILER MUST DO A 5106 UPDATE AND RE-TRANSMIT THE ENTRY.

VL4:	DRAWBACK TEAM INVALID

IN THE DRAWBACK MODULE THIS MESSAGE MEANS THAT THE FILER HAS GIVEN US A DRAWBACK CLAIM WITH AN INVALID DRAWBACK TEAM NUMBER.

EIT:	LOCATION CODE REQUIRED

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE C13 REC, POS 11-15, PROVIDES A FIELD FOR THE IDENTIFICATION OF A CODED LOCATION. THE DATA IN THIS ELEMENT DEPENDS ON THE LOCATION CODE IDENTIFIER, TRANSMITTED IN THE C13 REC, POS 9-10.IF THERE IS A VALID LOCATION CODE IDENTIFIER TRANSMITTED IN POS 9-10, THE CODED LOCATION CANNOT BE BLANK OR THIS MESSAGE WILL BE GENERATED. THIS MESSAGE APPLIES TO THE C43 RECORD, AS WELL.

AS3:	WRN: 514 PROT MAYBE UNTIMELY

A 514 PROTEST MAY BE FILED WITHIN 90 DAYS OF THE DATE OF NOTICE OF LIQUIDATION OF AN ENTRY, OR WITHIN 90 DAYS OF ANOTHER DATE CITED AS THE FILING/AMENDMENT PERIOD BASE DATE. ACS COMPARES THE SYSTEM DATE TO THE DATE OF LIQUIDATION THE ENTRY (OR OLDEST ENTRY WHEN MULTIPLE ENTRIES ARE CITED), OR THE FILING AMENDMENT PERIOD BASE DATE, TO DETERMINE IF THE DATE OF FILING IS AFTER THE 90TH DAY.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

94N:	EXPECTED UNG/UNH SEGMENT NOT FND

EDIFACT SYNTAX ERROR. THE UNG/UNH (MESSAGE HEADER) SEGMENTS ARE MISSING.

 Next 10 >>Showing results 1 to 25 of 1405